After bidding farewell to Factory Director Yu, Zhang Yang, and Fang Jinming, Zhang Yi got on his flying car and flew towards Daxi Province.

Of course, if the flying personnel carrier is in normal condition, there will not be enough power for the flying car to fly to the base in Daxi Province. After all, the flying car's endurance is less than two hours, and its cruising range is only 8 to 9 hundred kilometers.

That's all.

But this is just an ordinary flying car. The flying car Zhang Yi is riding in has been specially modified. Since this flying car was originally a flying personnel carrier, it has a load capacity of nearly two tons.

Therefore, in order to improve the cruising range and battery life, this flying car has removed all the redundant seats, leaving only four seats, namely the driver's seat, the co-pilot's seat and the two seats in the second row, while the other seats

All have been dismantled and high-energy batteries have been installed.

At the same time, in order to improve the cruising range, the top students of Colorful Stone Group have also made great changes to the roof of this flying car. On the basis of the original, they are still on the roof of this flying car.

A pair of wings that are not retractable are also installed.

The advantage of this is very obvious, that is, when the flying car is flying at high speed, the engine under the flying car can be turned off, and the flying car can fly just by relying on the wings on the top of the flying car and the push of the wings and rear engine.

, and the power consumption is also greatly reduced, greatly increasing the cruising range of the flying car to more than two thousand kilometers.

At the same time, if necessary, this flying car can even carry more than two tons of cargo if it takes off and lands on the runway and uses the engine under the car at the same time.

As a result of the transformation of this flying car by their Colorful Stone Group, Zhang Yi had a new idea in terms of flying cars, which was to develop a military aircraft similar to the beautiful country's Osprey.

If such an operational aircraft is really developed, then Zhang Yi and his technicians at Colorful Stone Group are confident that they will be able to develop a vertical take-off and landing aircraft with a larger load capacity and a longer range than the Osprey.

Although after the transformation of their flying car, the range of the flying car was guaranteed by outsiders, so its speed is much worse than that of ordinary airplanes. The fastest speed can only reach about 500 kilometers, and the cruising speed is only 3

About one hundred and fifty, but the distance from Lincheng to the Daxi Province base was more than a thousand kilometers, and Zhang Yi and the others only flew less than four hours to arrive.

When the flying car Zhang Yi and the others were riding arrived at the base, the flying car had just landed and had not yet stopped. Huang Xiru, who was not far away, couldn't help but walked over quickly, and Zhang Yi couldn't wait to open the door of the flying car.

He enveloped the oncoming Huang Xiru.

"Sister Huang, you have worked hard during this time." Zhang Yi said softly while holding Huang Xiru.

"It's not hard, I just miss you a little." Huang Xiru also said softly.

To be honest, this period of time was the first time since Huang Xiru came to Qicai Stone Group to help him that the two of them were separated for such a long time, nearly two months! It can be said that Zhang Yi himself missed Huang Xiru very much.

After the two hugged each other quietly for a while, Zhang Yi, led by Huang Xiru, arrived at a five-story building located in the center of the base. Although this small building only had five floors, it occupied a large area.

It is at least over 3,000 square meters. This small building serves as the office of Zhang Yi and the Colorful Stone Group in this base.

"Xiao Yi, if you come over now, I will be more relaxed in the future. I have been really busy during this period. If you don't come over again, I will rush you. You know, only the various equipment in the laboratory

It's enough for me to be busy. After all, many of these equipments cannot be produced by our Qicaishi Group ourselves and must be ordered from outside. Some of the equipments are even not available in China, and foreign countries have imposed an embargo on our Dahua Empire, so

We can only entrust the military to help.

Now, various machine tools and equipment used for aircraft production have also arrived during this period. Fortunately, the technical functions you hired are very skilled. Installing the machine tools is not a big problem for them, so now there are

Some parts have been installed, and some are still being installed. In a few days, when this batch of machine tools are installed, they can be installed and the work will officially start." After the two came to the office, Huang Xiru couldn't help but think about what she had done during this period.

I told Zhang Yi about the matter.

"Okay, Sister Huang, thank you. Once these machine tools are installed, we will start formal production. Let's go to the factory and talk!" Zhang Yi said.

Then the two of them walked towards a factory not far from the office.

In the No. 1 factory building of the base, this originally huge hangar has been transformed into a factory. Zhang Yi and Huang Xiru specially put on work clothes and safety helmets before entering the factory. Today's Colorful Aerospace

Although the subsidiaries of Colorful Stone have just been established, they already have their own professional work clothes. After all, the work clothes represent the image of their Colorful Stone Group.

Although this factory is very large, there are not many machine tools and equipment in it at this time. According to the plan, the total number of machine tools in this factory will be more than 200. However, there are only more than 100 in place now, and there are nearly 100 more.

The machine tool has not arrived yet.

Why are there only more than 100 units? This is because Qicaishi Group has production problems with ultra-high-precision CNC machine tools, coupled with transportation problems, so we know this. In less than two months, there are already 100 units.

Many ultra-precision CNC machine tools have arrived at the base, and there are even super-large ultra-high-precision CNC machine tools. This is already very difficult.

Fortunately, the Colorful Stone Group can produce ultra-high-precision CNC machine tools on its own without having to look at the faces of foreign machine tool manufacturers. At the same time, there are not so many cumbersome procedures, and there is no need to entrust agents to perform intermediary operations.

If it were in the past, which domestic company wanted to enter the aerospace industry? It had to purchase ultra-high-precision CNC machine tools from abroad, which was quite troublesome, with complicated procedures, many restrictions, and a long cycle.

We also need to entrust some group agency companies to operate, and even the machine tools we get are only second-rate foreign products.

"Xiao Yi! If everything goes well, in a few days, all the airports in the workshop will be installed and debugged. Moreover, the remaining machine tools, with less than 100 units, according to the head office, will be installed within a month.

Arrived within.
Chapter completed!