When facing people's doubts, the heads of those machine tool factories admitted that they could not compare to the Northern Industrial Group. If I don't have the best level, I will admit it. There is nothing wrong with this. 5v85v85v5v Reading 5v books, ●●o

Although it was a bit embarrassing to admit that his skills were not as good as others in public, they also saw hope that the Northern Industrial Group could do it. Why can't we do it? Everyone is Chinese. Even if there is Liu Lang, three cobblers can still beat Zhuge Liang. We are many people and powerful, and if we work hard, we may catch up with each other.

This is the mentality of many machine tool factory leaders, but they forgot a sentence, one time and another, the "Eighteen Arhats" that were glorious back then have long been different from the past. After the reform and opening up, the Arhats became novice monks in the wave of marketization, and many of them began to go downhill.

The localization of Volkswagen allowed some companies to upgrade that year, which was a great thing, but most companies did not seize this opportunity and died. In just a few years, half of the factories suffered losses, and the amount of losses increased year by year.

This is the current situation of the national machine tool industry. The best machine tool industry is still in Liaobei Province. The first and second machine tool factories provide parts for Volkswagen every year, which is a good income. Well, it can only be called good, but it cannot be called good, it just makes them not lose money. The best one is the Northern Machinery Engineering Construction Group. They were a group established under the coordination of the country last year. It was composed of several machinery manufacturing plants. These manufacturing plants were previously small-scale enterprises. Of course, the so-called small scale means that compared with the "Eighteen Arhats", it is actually not small. Each company has nearly a thousand people. Through integration, a medium-sized enterprise with more than 1,100 employees has formed. The goal of the Northern Machinery Engineering Construction Group is very clear, which is to provide downstream products to the Northern Industrial Group. "8" 8" Read" book, ∞o ◎

Large machine tool factories such as the "Eighteen Arhats" all have a sense of mission, thinking that they are pillars of the country's manufacturing industry, and they do want to make a career, but CNC machine tools involve too many basic industries, so it is not easy to conquer them one by one. At least you have to need time and money. If you don't mention the money, you will probably have to pay at least tens of millions of yuan. This is probably not enough. This is stumping most people. Even if some factory managers can make some money by moving around, time is another problem. You don't think about it without more than seven or eight years of accumulation.

It took seven or eight years to focus most of its energy on a project, but at the same time it could not produce benefits during this period. This is fatal to a company. Not to mention seven or eight years, it can't stand it even in one or two years. You should know that Northern Industrial Group spent three years to improve the technical level of workers and purchase a large amount of equipment. There was no profit in three years, and it spent a total of more than 50 million US dollars. Even though the products were manufactured and sold well in China in two years, Liu Lang's loss rate reached 80% in five years. Which factory in the entire country dares to do this?

Improving the industrial level is essentially a money-burning industry, especially many enterprises in the country are not good at the foundation. If you want to make a rapid progress and improve, you can only make efforts in funds. How can they have so much funds? Therefore, many aspects are dominated by the state, and a large amount of scientific research funds are given every year. But then again, no matter how much money the state gives, it will be divided by multiple companies. It would be good if each company can be divided up to more than 10 million yuan. This cannot be used all of this money in scientific research. It also has to take care of other categories of products and equipment, which has caused a situation where the joint force cannot be formed.

The country established the Northern Machinery Engineering Construction Group. The purpose of this group is very clear, which is to provide downstream products to the Northern Industrial Group. Liu Lang asked them to do whatever they wanted. It is very purposeful. The funds allocated by the state can be quickly used in the real place. In nearly a year, the Northern Machinery Engineering Construction Group has increased at a speed visible to the naked eye. Although it has not achieved real profits, its monthly profits can be improved a little, and the level of workers has also been improved with the help of Liu Lang. This potential has been revealed and everyone is optimistic about their development.

The downstream machine tool industry seminar held by the Ministry of Industry in Fucheng is to solve this problem. We must concentrate our efforts to develop the CNC machine tool industry. Don’t pretend to be a big brother, and you don’t even care about you when you pretend to be a big brother. If you pretend to be a big brother, you should think hard about what to do next.

Mid-July is the hottest time of the year in Fucheng. The maximum outdoor temperature can reach 40 degrees, which is dry and hot. However, the cool air is pleasant in the exhibition center of the Northern Industrial Group. More than 200 experts from the manufacturing industry across the country gather here. Jiang Botao led two deputy ministers to preside over the meeting in person.

A huge white curtain is placed in front of the exhibition center, and a projector is showing color photos. The content of the photo is the downstream industry of machine tools, while Liu Lang keeps explaining.

First of all, the mold industry is used in industrial production to obtain various molds and tools for the required products by injection molding, blow molding, extrusion, die casting, or forging molding, smelting, stamping and other methods. They mainly achieve the processing of the appearance of the item through the changes in the physical state of the formed materials. They have the characteristics of high production efficiency, high consistency of the parts, high precision of the parts, and energy-saving and material-saving. The level of the mold industry has become one of the important indicators to measure a country's manufacturing level.

The automobile industry, and this industry is a huge industrial chain consisting of vehicle manufacturers, component suppliers, product dealers and service providers covering the entire process of automobile complete vehicles, component design and research and development, manufacturing, sales, after-sales service and scrapping and recycling.

The most important thing is engineering machinery. As an important downstream industry in the machine tool industry, this industry requires a wide variety of machine tool equipment, including vertical horizontal machining centers of various specifications, CNC lathes, CNC grinders, gear processing machine tools, CNC special machine tools, etc., as well as a large number of forging and pressing equipment such as large CNC shearing machines, CNC bending machines, CNC cutting machines, and various presses for automatic loading and unloading. In addition, the construction machinery industry also requires welding machinery, paint spraying and surface treatment equipment.

These are all big frames, and everyone here understands, and Liu Lang begins to dig into various details again.

First of all, the main body of the machine tool, which is the main component of the machine tool, including the bed and base castings, spindles and gearboxes, guide rails and slide platforms, lubrication, chip removal and cooling. Who needs to do these?

Then there is the transmission system, which is an important "vein" of CNC machine tools. It leads to the orderly progress and completion of the machine tool work, including tool, transmission machinery and auxiliary power system. As for the tool part, it includes protection device, tool magazine and tool change device. The transmission machinery also includes three parts: ball screw, linear guide rail and worm sub-s, and the auxiliary power system includes two parts: hydraulic system and start-up system.
Chapter completed!