After drawing the design drawing of the loom, we started making it.

Ye Qing distributed the parts to the tribesmen to process them according to the ink lines he drew.

He gradually stopped doing the specific work of carpenters himself.

The main material of the loom is made of sandalwood that has grown for many years. It is heavy and strong enough. The most important thing is to prevent montworms.

Is it a luxury to use sandalwood?

He doesn't think so!

In the wild, rare in later generations, and precious trees are everywhere in the mountains.

The tiny sandalwood branches processed the remaining scraps, but they could not get into beads like modern times, and they turned into firewood and burned.

Well, the smoke coming out is very fragrant!

Some of the keys are small parts, such as twelvets and twelvets, which he made of bronze.

Because of the use of shuttle technology, the width of the cloth is no longer limited by the range of manual operation, Ye Qing directly sets it to 1.5 meters.

The fabric woven by the tribe is less than 35 cm wide, and it is too troublesome to make clothes with such a narrow fabric.

The width of the amplitude is higher and the efficiency of weaving is higher.

The width or size of the shuttle passes is actually not much different in time, so it can be ignored.

The width of 1.5 meters is more than four times higher than the width of 35 cm.

One meter and five wide, the total number he set is 1,500, that is, the number of warp yarns of cloth is 1,500, which is incomparable to tens of thousands of people in later generations, but it is much denser than the cloth woven by tribes.

He sets it to three yarns and one zither, which requires 500.

There are some spare ones.

He was not patient with ropes and bamboo to make collars and veils. In order to save trouble, he was made of copper pieces.

Although copper is precious, it still needs to be used where it should be used.

However, the manufacturing of copper sheets took a lot of effort, but it actually did not save much trouble.

Instead, there are more things.

He constantly designs and makes various tools.

In order to make copper sheets, he first made a device to press copper sheets.

This copper pressing device took two days.

The molten copper water was pressed into thin copper sheets of about 0.1mm through two rollers, and then the copper sheets were cut into copper strips of the same size on the guillotine workbench.

There are eyes that pass through the yarn at the same location on the film.

He then made a simple manual stamping device to stamp out the yarn eyes on the hexagram.

The processed hedges and reed teeth have burrs, and the edges are sharp and not round. It is easy to cut the yarn and cannot be used.

There is no way to take advantage of this, only polishing.

In order to reduce the workload of polishing, he designed two more tools.

One is to polish the edges, fix the tool, then place the edge of the copper sheet into the groove of the tool, then pull the copper sheet, and repeat it several times. The edges are smooth enough, which is enough to use.

The polishing tool for holes is another type.

He made a simple grinding wheel workbench, which was pedal-style.

In fact, it is similar to a foot-pedal spinning machine, except that the spindle shaft and direction are changed to a grinding wheel in a thin rod shape.

As for grinding wheels, they are made of ceramic.

Copper wire is wrapped with a layer of enamel glaze, glued with fine river sand, and then burned.

Although it is fragile, it is not a problem.

As long as the speed is fast enough, the paper can be used as a knife, right?

Enamel is a silicate substance, similar to glaze, glazed, and glass, and its main components are feldspar, quartz, etc.

During installation, the reed teeth are fixed to the spokes of the reed. After the rope is tied, it needs to be glued.

Just in time, the fish maw glue prepared for shipbuilding was used.

The tribe's fish scales and fish bladder have been acquired in this month.

Fish maw glue has been boiled a lot.

Fish bladder glue is so useful.

The production of bows and arrows, the installation of various stone tools with handles, and the combination of accessories can be used.

Although there were bronze tools, the tribe members still did not discard their stone tools.

The ownership of the bronze tools does not belong to them individually, but belongs to the tribe collectively. They only use them temporarily and need to hand over them after they finish their work and keep them in a unified manner.

And the stone tools belong to them privately.

The patriarch was the first person to use fish bladder glue for jewelry.

His feathers are made of twine together, not very strong and easy to shed hair.

After each sacrifice, he would carefully check to see if there were few feathers in the feather crown. If there were fewer feathers, he had to find them back.

Although the tribe often hunts birds, there are not many birds with beautiful feathers.

Therefore, beautiful feathers with bright colors on the feather crown are also very precious.

...

In order to make a loom, Ye Qing invented a lot of things.

These things are not only useful for making looms, but also for other places.

He lamented that large-scale projects can indeed promote significant technological progress. No wonder modern countries often launch various large-scale projects.

People are in different locations and see different things.

He is now considered a ruling class, although it is only a tribal ruling class of 200 people.

The village chief is also a cadre!

In his previous life, he was a salted fish and belonged to the ruling class. He couldn't understand many things. Now, he has some understanding of the identity change.

It took seven days for the loom to be installed.

For the time being, he is only going to make one.

He calculated that the entire tribe, with this loom, would be sufficient in the short term.

He was going to hand over the loom to his mother A Xing for management.

He called A Xing, A Zi, A Lian, and the seven-year-old girl who wanted to make clothes for her younger brother.

Before weaving the fabric, preparation work is quite troublesome and meticulous.

He can't do it.

For people with his personality, it is a fatal job.

The waist machine of tribal weaving cloth has a job of wearing a variety of clothes.

The weft is to use a wooden weft knife to make weft. Although there is no job of shaving the pen, this work is not unfamiliar to them.

Of course, I have prepared several sets of these gadgets when I run through a hybrid needle and a zipper knife.

A Xing first fell in love with the hybrid needle.

Wearing a crochet needle is a different from a sewing needle.

But Ah Xing couldn't tell it for a moment. This needle was much more delicate than the bone needle she sewed her clothes.

This chapter is not finished yet, please click on the next page to continue reading the exciting content later! Seeing her love-willing look, Ye Qing felt a little ashamed.

He has been busy with this and that, but he has never considered her.

He silently put the production of sewing needles into his mind.

There are too many things, so he can only do it in the same order of priorities.

Many things I want to do are not too late, such as making mosquito coils and umbrellas.

The first step in preparation is to wind the yarn.

1500 yarns, evenly wound on the shaft in order,

They will all do this.

The loom is just ten times more yarn than they usually do.

Then we enter the most patient process: through the whole process and scatter.

These 1500 yarns must be passed through the tangents one by one, and the order cannot be wrong.

The idiom is very detailed, and it is what it means.
To be continued...