The warehouse was filled with rubber raw materials and scrap steel bars. The newly recruited interns were cutting steel bars as required. When they saw Ji Donglai coming, everyone greeted him.

"Brother Ji, the mold is pretty good, but is it a waste for us to use electric heating?"

Looking at Ji Donglai holding the steel wheel with iron pliers while checking, Ding Aixing asked in a low voice.

In Ding Aixing's traditional impression, heating these things is gas or coal-fired. Ji Donglai also has coal-fired here, so it's better to build a simple boiler and blower up there, and place the iron lumps there.

Burning red steel bars is also a matter of minutes. Now, using inductor heating is improved, but the cost is also improved.

The indicator of the meter is like a hand-pulled one. After a long time, Ding Aixing was worried that Ji Donglai would not be able to bear the cost.

"You can try it in winter. Now burning coal can easily cause dissatisfaction among people around you. Once you are reported, we will easily be driven away! In the current situation, we are too small, so we have to survive first!"

"The core of industry is nothing more than efficiency. Do you know anything else? In the future, if natural gas is used here, we can pull a pipe here, and then we can get the cost down! Just do this now, let our people pay attention to safety!"

"Nine out of ten people who do stamping are not complete. We are all young. I don't think this happens when you are not married, let alone I don't have the money to pay you any compensation. Do you understand?"

A large stamping machine is a pair of big scissors. Anything can be pressed into a cake if it is placed underneath. Since this machine was rented, Ji Dong said the most important thing is safety.

Ji Donglai also had a headache for those vulcanizers. Except for one rebate machine, the rest were all coal-burning. Ji Donglai would not want this broken thing if he had some money in his hand.

It's still short of money now, otherwise Ji Donglai would have changed it.

Many things are easy to say, but they are not that easy to do.

Now Ji Donglai can only buy rubber raw materials made by others, and the cost is still relatively high. In the later stage, he can hold everything from the source to the finished product in his hand, so Ji Donglai can control the cost.

The polyurethane A-material obtained from the outside is not low now. Fortunately, the other party is for Sville's face, otherwise no one would have agreed to provide Ji Donglai with the original refined A-material.

The other party can earn more by contracting labor and materials, and there is no need to worry about waste.

“Buzz!”

Lao Zhao, the lathe, also started uninterrupted work at this time, because Ji Donglai did fine punching, the product has very good appearance consistency and fast clamping. Almost one-cut holes in the inner holes of the car threads, and occasionally two-cuts are also defective.

"Leader, this thing is best with CNC. You only need to use it once and you can finish it in minutes. We are doing this efficiently!"

Ji Donglai came over to check the product size, and Lao Zhao also stopped his work and handed Ji Donglai a cigarette.

"Do you know how to control CNC?"

He lit a cigarette for Lao Zhao first, and Ji Donglai smacked his lips.

"Yes, what I did before leaving that old factory was CNC, and I taught my apprentice to kick me off!"

When talking about his previous work experience, Lao Zhao felt depressed.

In the past, Lao Zhao's boss was also a private boss. He looked very good. He occasionally gave Lao Zhao some clothes he usually wore, and of course he also changed the rest of the boss.

Later, the boss brought his nephew over and asked Lao Zhao to take him. Lao Zhao did not doubt that he had him. As a result, after teaching, the boss immediately found a small thing that could not be more small and drove Lao Zhao away.

It is precisely because of this that Lao Zhao came to Ji Dong to work here that he has always been a general worker and never taught anyone's techniques. Of course, there are very few people who can learn general worker now.

"Okay, come with me!"

Ji Donglai didn't think much about it and took Lao Zhao directly to the Panasonic Park. There were a row of machine tools in front of him, all of which were CNC machine tools.

"Boss, this is great! Yamazaki Mazak, all of them are hydraulic chucks, my efficiency can be improved by more than half..."

Looking at the CNC machine tools, Lao Zhao's eyes shone, as if he was back when he was an apprentice, Ji Donglai nodded and called the class monitor here.

"From now on, Master Zhao will take you to the machine tool here. Do whatever you arrange, and don't have any repulsion! If Manager Lu comes, I will say I've arranged it!"

"Master Zhao, just give me some guidance here. Our construction period is relatively tight. You can read the arrangements. This is a long-term job! You can compile the program and I can compile it. We can do it all! If you want to learn the machining center there, you can also find me. It is all our own business!"

"I will calculate your salary again, according to CNC salary! If you train the students in this workshop, I will calculate it according to the director's salary! In short, I want the output, and you will also take the machine-plus workshop there, and I will calculate the money for you!"

Ji Donglai treated workers like Lao Zhao with tragic experiences differently and tried not to let the other party be too careless.

Lao Zhao kept nodding. In the past, he didn't have any salary to take his apprentice, but now Ji Dong comes to pay money, which proves that he understands.

I feel willing to leave three wages even when I leave in the future.

"Boss, don't worry, there is someone who doesn't know what to do. I'll buy my fingers! These kids are not as dark as those people, we understand!"

Many times, the ability to make money is much better than those bullshit promises, and Lao Zhao has already started working in minutes.

Ji Donglai asked Liu Yupeng to arrange a car to pull the semi-finished wheels from the factory and directly process them in Panasonic Park.

With CNC machining inner holes, the diameter tolerance is almost the same. Ji Donglai simply changed the center size of the molding mold, so that positioning is easier to do.

The next night, Ji Donglai started forming the guide wheel, and the vulcanizer slowly fell down. In seven minutes, the product was opened directly.

"Okay, just follow this! Insert all the cavity, hand the blocks taken down to Master Zhao, and let him continue to open the mold!"

This time, Ji Donglai made plug-in and unplugged cavity. After all, polyurethane is not all rubber, and the molding speed is much faster!

In addition, it is much faster to correct the mold in this way. The young people working here are all young students, who are quick-witted and quick-witted, and their maintenance of molds is beyond ordinary people.

One model is forty-eight chambers, seven minutes is one model, with a production of more than 10,000 yuan per day.

When spraying adhesive, use a hollow bar to thread all the skeleton centers in the yard, install gears on the head, drive with chains next to it, and drive the reducer bought from the scrap station.
Chapter completed!