"Okay, let's just do it, the company is still expanding,

You need money everywhere, and that’s all the money is already very good!”

Liu Xiaodong and the others then agreed with the dividend plan, and together they made plans for the company's development next year.

After talking about work, all I had left was eating and drinking. They ate one of the two lambs.

After eating and drinking, everyone went back to their homes, but Li Zhenhua and Li Yun still returned to the hotel.

"This year, let's go home with me for the New Year!" The two of them were lying on the sofa, and the TV series was playing on the TV, but they didn't focus on the TV.

Hearing Li Yun’s question, he fell into silence and waited for a while before answering her question.

"I won't go to Haicheng this year. I just stayed in the blacksmith shop. At that time, the people who built houses behind me also left, and the house was no longer quarreling, so I went back to live.

There are also those I spent last year in Haicheng, and some customs were not followed. This year, it is not possible. My family still has to worship them. I have to go to visit my grandfather and parents’ graves in the second day of the lunar month, and there are so many things!”

After Li Zhenhua finished speaking, Li Yun did not force him to go to Haicheng, and she also had her own thoughts in her heart.

As the end of the year approaches, the company's affairs are getting busier, but all this has nothing to do with him.

It has no effect on him and still maintains the previous pace of life!

On the 26th of the year, Li Yun went home, and after he left, he moved back to the blacksmith shop.

When he was the only one left at home, he felt more free. As the Chinese New Year approached, he did not plan to continue to go to the company.

This is the right time for him to get into the virtual laboratory and do his own research.

In the laboratory, the accuracy of 50 nanometers is used to optimize existing chips with the help of the analysis eye.

And in his hands, the lithography knife also played a great role, but as the chip circuit diagrams were drawn more and more,

He gradually felt disgusted with this repeated work, but when he turned his attention to the lithography knife in his hand again,

He was immediately stunned, as if he had already fallen into a misunderstanding, why did he have to carve it with his hands?

What is the difference between humans and animals? People can use tools, but animals can't.

Why didn't he upgrade the lithography machine from 1 micron to 0.05 micron?

A feeling of being very stupid and wasted a lot of time came to my mind. Then he started to study lithography machines.

Erase half of the things in front of you in the laboratory, and then re-create the purchased micron-scale lithography machine.

Looking at the original lithography machine that was reappeared in front of me, I felt like a lot of time wasted.

There is a shortcut and not taking it, but instead choose the most difficult path.

And just as his understanding of lithography machines and chip manufacturing became more and more profound, he gradually felt his ignorance.

There is a truth: the more you know, the more you will feel ignorant, because when you don’t understand, you will feel that something is very simple to do.

But as the knowledge gradually increases, I also understand how difficult it is to do what I have to do.

Suddenly I felt that I was so lucky to have the chips out before. This was only in the virtual laboratory that he could make them out.

If this really comes to reality, let alone rubbing a chip with your hands, a clean room alone will stump him.

It was also after he had these ideas that he gradually lost confidence in the idea of ​​rubbing chips.

If the chips are rubbed out in reality, it would be a huge project. The first thing to do is to build a clean room with a level of one level.

There is still a lot to do in reality, but with their current size, they don’t have that much money to build these things.

Since then, he has completely abandoned the idea of ​​rubbing chips with his hands, because it is impossible to achieve in the current reality.

It seems that everything I did in the virtual laboratory before was useless.

But this also made me realize what the chip industry is. Among what he learned, there is still a long way to go in Jiuzhou.

Lying on the bed, opening his eyes again, looking at the dark room, he sighed, turned over and fell asleep.

However, after returning to Haicheng, Li Yun faced pressure from her parents, thinking that she had returned alone and did not bring Li Zhenhua back.

Ding Yan once thought that the two of them had broken up, but after subsequent cross-examination, he also knew the reason.

Although the two of them are not married yet, in Ding Yan's eyes, their relationship can be said to be a foregone conclusion.

After understanding the reason, Li Yun was let go.

During the Spring Festival, people also have free time, and a large number of people are watching TV shows at home and watching Douyin.

It was at this time that the Antarctic video, which was a movie plot-like video, became popular.

The reason for the popularity is also very simple. This time it became popular, it started with the external network.

A scientific expedition team of the Antarctic team in the Antarctic team was in the same situation as the Kyushu Antarctic team when they went out for scientific research tasks.

The ice surface was also facing shattering, but their snowmobile did not play much role.

There were six snowmobile cars in total, and only two were run out in the end.

The other four cars, with four people in the car, were all buried in Antarctica against the broken ice surface.

After the only two left, they reported the matter to the scientific research station.

The videos as evidence were submitted to the above, and one of the staff also uploaded the videos online.

A bad country exchange student in Kyushu immediately thought of the video he had seen on KuaiTi.

The two videos, the same situation, but different results, made it a little difficult for the young man to accept.

Then the two videos were edited together and posted on Kuaido International. The video became popular and was transported back to Jiuzhou from Kuaido International.

And the snowmobile that escaped death with the members of the Kyushu Antarctic scientific expedition team has become the focus of people's attention.

But even after searching, people couldn't find which brand of this motorcycle was from.

As people were curious, a large number of people suddenly poured into the official website of Antarctic Station, almost all of whom were asking about motorcycles.

But it is the Spring Festival now, and it is already on holiday, and no one on the website answers this question.

This matter was put on hold.

Li Zhenhua celebrates the Chinese New Year very traditionally, and the customs of celebrating the New Year remain the same as when his grandfather was still alive.

After the Chinese New Year, work began to resume on the seventh day of the lunar month, and Li Yun also came back on the eighth day of the lunar month.

The days afterwards returned to their former peace. The house behind the blacksmith shop had been almost built, everything on the outside had been decorated, and the rest was only decoration.

The newly established factory is still under construction, and it will probably take three or four months to fully put into use.

After Li Zhenhua put down his obsession with rubbing the chips with his hands, he devoted all his energy to the manufacturing of the aircraft mechanical parts.

As for flight control, avionics and other things of model aircraft, we can only buy ready-made chips on the market for research and development.

As time passed, he finally got all the materials used by the model aircraft, and then the model aircraft engine was manufactured.

The most difficult thing in this material is what needs to be used in the core combustion chamber. After a series of overcoming difficulties, these materials were finally made.

This single crystal nickel-rhenium ferroalloy in front of him took a lot of effort to make it.

Moreover, for this alloy, he also specially created a controlled magnetic field to arrange the single crystal of this alloy.

The manufacturing of the engine completely replicates the process in the laboratory. The experience accumulated in the virtual laboratory was finally handy at this time.

The first thing to be made is the receiver of the engine combustion chamber. The engine diameter is reduced to 29 cm. The size of the receiver is completely capable of making this.

A forty-cm-long square single-crystal nickel-rhenium ferroalloy was placed in the processing center. This piece of metal was the new high-temperature alloy smelted before.

In the light curtain in front of him, the internal stress of the metal was released almost the same.

The only little internal stress left also made him knock it out with the help of the Eye of Analysis with the help of the Eye of Analysis.

After putting the metal, as he pressed the start button, the cutting head of the machining center rotated at high speed, and the milling cutter cut a little bit of debris on the metal.

As the cutting head rotates, debris falls from the square metal block, and its appearance is also changing with cutting.

Slowly, as more and more debris are cut from the metal, the metal no longer returns to its original shape.

After a day of manufacturing, the upper half of the metal block has been turned into a circle with holes by the machining center.

In two and a half days, a complete combustion chamber receiver was taken out of the machining center.

He also stayed in the machining center for two and a half days, and has been watching the machine operation.

Take out the processed receiver from the inside and put it aside for later use, and then start manufacturing impellers, roulettes and other parts in the combustion chamber.

The processing of the roulette is relatively simple, but the processing of the impeller is a bit difficult.

Because the machining center he is using now does not meet the requirements in terms of accuracy, which makes him only use the machining center to make a preliminary rough blank.

Afterwards, he took out the thick blank, fixed it on the vise, and rubbed it by himself with a file.

One leaf and one leaf were rubbed out in his hands, and the rubbed leaf was also loaded on the impeller wheel by him.

When loading it on the roulette, we began to notice the dynamic balance of the impeller.

His eyes and hands are not vegetarian, so dynamic balance can only be considered a minor problem.

The turbojet engine is also taking shape with him, and it is taking shape little by little.

Time slipped away quietly as he built the engine. After more than a month of manufacturing the engine, his hands finally rubbed out.
Chapter completed!