Just like outside the hive, the Terminator arsenal inside the hive is also very busy at this time.

But compared to the busy Skeleton Terminators outside, there are almost no active Skeleton Terminators here. Most of the Skeleton Terminators shown in front of Li Wudao are stationary Skeleton Terminators.

Looking over the basically formed alloy skeletons, Li Wudao slowly walked into the Terminator Arsenal, and behind him, the steel gate weighing several tons fell like a chasm, once again separating the Terminator Arsenal and the

The outside world is completely isolated.

Different from the White Queen's transformation of the Red Alert Base on the ground, the Terminator Arsenal under the control of the Red Queen completely adopts assembly line production. All the processes for mass production of skeleton Terminators are completed by automated machinery under the control of the Red Queen.

As for the construction of the Skeleton Terminator, it can be said to be complex, but it can be said to be simple, but it is actually quite simple.

The reason why it is complicated is that the successful construction of a skeleton terminator involves all aspects of scientific and technological knowledge. Among them, the most basic body construction includes metal smelting technology, special material synthesis technology, armor forging technology, and reasonable body structure construction technology.

and various complex basic technology trees.

And even if these basic technologies are fully unlocked, it can only ensure the birth of a complete Skeleton Terminator body. To make the Skeleton Terminator truly move, a corresponding perception system and mechanical linkage system must be built for the Skeleton Terminator.

Energy supply systems, as well as various drive systems such as central intelligent software systems.

The reason why it is simple is that by absorbing the knowledge of various black technologies related to the end of the world, Li Wudao has completely unlocked the various technology trees required to produce Skeleton Terminators of levels below the second-level initial version, thus making the Skeleton Terminator originally complicated.

The production process has been streamlined into corresponding modular assembly line production steps.

On the skeleton terminator assembly line controlled by the Red Queen, the formation of a skeleton terminator requires a total of three major steps.

On the assembly line, the first step is to introduce the alloy metal solution that has been refined into the corresponding Terminator body and limb mold, and then undergo cooling treatment and corresponding subsequent finishing to form the skull Terminator head and limbs.

and the three basic components of the basic skeleton of the body torso.

Then, these basically formed body parts will enter the second assembly step of the assembly line. In this step, the head parts will be loaded by the automated machinery on the assembly line, including the perception system and the central intelligent software system.

Class necessary functional modules, and then seamlessly encapsulate them.

The torso parts will also complete the construction of the energy supply system and various mechanical linkage devices in this step. As for the steel limbs of the Skeleton Terminator made of alloy, they will be loaded with corresponding components in this step.

Linkage system devices and electrification function modules.

After completing all this, the automated machinery on the assembly line will first use the linkage device modules on the torso and alloy limbs to effectively splice the two into a whole, and finally completely splice the head parts and body parts together.

, completely complete the assembly step.

After the splicing step is completed, the assembled skeleton terminator will enter the next step, loading the smart chip and loading the energy system.

This is the last and most important step. Only after loading the smart chip can the Skeleton Terminator effectively receive the various mission instructions issued by Li Wudao, the Red Queen and the White Queen, and execute them thoroughly.

As for the loading of the energy system, it goes without saying. If there is no energy system to continuously provide energy, the Skeleton Terminator will be a skeleton that cannot move, a piece of useless iron.

Compared with the completely independent development of the built-in program of the smart chip, Li Wudao used a completely clever way to develop the energy supply system of the Skeleton Terminator. It was optimized and transformed from the common energy battery in the apocalypse.

Interestingly, when Li Wudao analyzed the technology and components of energy batteries, he discovered that the energy batteries commonly used in the apocalypse actually use zombie black cores as energy supply materials. The higher-level energy batteries made of black cores, the more

The more energy you have, the greater it is.

After extensive analysis and deduction of the photon matrix, Li Wudao further optimized and transformed the energy conversion technology in the energy battery, comprehensively improving the energy conversion efficiency of the black core.

The effect of comprehensively improving the conversion efficiency is very obvious. With the same black core material consumption, the Terminator energy supply module optimized and improved by Li Wudao can produce several times the energy of ordinary apocalyptic energy batteries.

The Skeleton Terminator uses a dual energy module supply method. There is an energy supply module built into each of the left and right chests. When the Terminator is operating normally, the energy module on the left chest supplies what the Terminator needs.

energy.

Once the energy supply module on the left chest is damaged or the accessed energy is exhausted, the energy supply module on the right chest will be activated immediately, taking over the energy module on the left chest and becoming the energy supply device of the Skeleton Terminator.

After completing the standard process steps for forming these three terminators, as well as the various small processing processes of their corresponding subordinates, a qualified skeleton terminator is basically completed.

And if necessary, the Red Queen will drive the completed Skeleton Terminator into the blood pool deep in the arsenal, and put a complete organic camouflage on the Skeleton Terminator with a human appearance.

Walking slowly in the Terminator Arsenal, Li Wudao said to the Red Queen: "From now on, the production of the first-level version of Terminator will be completely stopped, and the corresponding production lines will be transformed and upgraded to the quantitative production line of the second-level Terminator.

Comprehensively increase the production of the second-level initial version of the Terminator!"

"As you command, Master," the Red Queen responded respectfully, and then spoke to Li Wudao: "Master, the virus gene extraction in the Biochemical Experiment Department has achieved preliminary results, and various biochemical experiment data have been collected. Can you please lift the lock?

, start the follow-up biochemical experiment plan immediately?"

"The lock is lifted, start the follow-up plan immediately," Li Wudao said to the red queen, then he closed his eyes and transferred his core consciousness to a Terminator body in the Biochemical Experiment Department. When he opened his eyes again,

What impressed his eyes were one mutated corpse after another soaked in formalin biochemical liquid.

Li Wudao was already familiar with this, because the mutated corpses soaked in the formalin biochemical liquid were all mutated zombies and mutated monsters that he had killed before.

Looking around at random, what caught Li Wudao's eyes were the first-level mutant rubber-limbed zombies that he killed, the zombie dogs when he encountered Zhu Xiaojie, and the Huo Huo who he and Ye Xiaoxin killed together in the Fire Wolf Woodland.
Chapter completed!