Time flies quickly, and in a blink of an eye, it is the seventh day of the lunar month, and Wang Bin also came to the factory on the morning of the lunar month.

Although according to the time he had set to resume work before, the headquarters is on the eighth day of the first lunar month, as the boss of Tiangong Technology, it is impossible for him to come to work on the eighth day of the first lunar month like ordinary employees.

In fact, it is not just Wang Bin himself. In addition to Wang Bin himself, the middle and senior management in the factory today also came back yesterday. When Wang Bin came to the factory today, they had already arrived.

"Mr. Wang, happy new year!" When everyone saw Wang Bin entering the factory, people kept saying hello to Wang Bin, and Wang Bin also smiled and said hello to them one by one.

At the same time, Wang Bin also used his mobile phone to send a big red envelope in all the companies and sent some blessings.

After arriving at the company, Wang Bin did not go to his laboratory or office immediately, but came to the conference room first and entered the conference room. Wang Bin found that Jiang Zongliang and Wang Xu were already in his conference room at this time, and the two heads of the branch, Cai Yuanxin and Huang Jingu, had arrived.

So Wang Bin also walked directly to his seat and sat down, asking them: "Manager Jiang, Manager Huang, Manager Cai, and Wang Xu, how are your preparations for resumption of work going on? After all, all companies will go to work tomorrow."

"Boss, everything is already arranged in our old factory. As long as the employees check in the morning after tomorrow, they will receive red envelopes from the company. At the same time, the security personnel in our old factory have also purchased a large number of fireworks and will be set off tomorrow morning." Seeing Wang Bin's inquiry, Jiang Zongliang, the head of the old factory, replied first.

At the same time, Wang Xu and other branch leaders also talked about the situation of their company. Like Jiang Zongliang and his old factory areas, the new factory areas and several branches are ready. As long as the employees come back, they can start construction immediately.

At the same time, Wang Bin also asked about the employees' situation in various factories and branches.

Obviously, Wang Bin is worried that some employees will not come after going back for the New Year, but fortunately, the situation in various factories and branches is not as Wang Bin thought.

According to their report, this year their Tiangong Technology and its branches have reached more than 98%, which makes Wang Bin very satisfied.

Several people held a meeting in the conference room for a whole morning? It was not until noon? Wang Bin, Wang Xu and Jiang Zongliang and others walked out of the conference room.

………

On the morning of the eighth day of the first lunar month, when Wang Bin drove to their Tiangong Technology headquarters? He found that all the middle and senior management personnel in the headquarters were standing neatly at the door of the new factory area? He smiled and welcomed their Tiangong Technology employees to come to work.

And whenever an employee enters their Tiangong Technology factory, as the person in charge of the new factory, Wang Xu will come forward with a smile and hand them a red envelope.

Seeing this situation? Wang Bin secretly nodded to Wang Xu? Although Wang Xu is far inferior to Cai Yuanxing and Jiang Zhongliang in terms of management and other aspects, he also has his own strengths in many aspects.

At this time, Wang Xu and the others also discovered Wang Bin's arrival, so the middle and senior executives of Tiangong Technology at the door said in unison: Happy New Year, Boss!

Then, the fireworks placed at the entrance of their Tiangong Technology were also lit? For a moment, colorful sparks illuminated the entire sky above Tiangong Technology.

After Wang Bin arrived at the company, he first walked around the various factories of the company. He also gave condolences to the workers from time to time. When he returned to his office, it was almost ten o'clock in the morning. So Wang Bin immediately became anxious that the middle and senior management of their central Tiangong Technology held a meeting.

In the afternoon, Wang Bin first went to the old factory area, and then ran to three branches in the city for a walk.

By the time he came back, it was already evening, and Wang Bin didn't care about this. After all, today was the first day of work, and the workers only started to work symbolically in the morning. In the afternoon, after meetings between various departments and workshops, there was basically no work. In this way, the first day of work in the New Year passed.

On the ninth day of the first lunar month, their production of Tiangong Technology finally officially got on track. Just like yesterday, Wang Bin came to their Tiangong Technology first.

After entering the workshop, Wang Bin could clearly feel that the workshop situation was clear at this time, and the atmosphere was much better than yesterday. All the workers were doing their jobs with all their hearts and strengths. Wang Bin was very satisfied when he saw this situation.

Soon Wang Bin came to the precision machining workshop. After so long hard work, the machine tools in the workshop were far more than those applied by the superiors before, except for the more than ten ultra-high precision CNC machine tools that Wang Bin applied to his superiors last time.

At the end of last year, he applied for several ultra-high precision CNC machine tools from his superiors, and also obtained several ultra-high precision CNC machine tools from foreign manufacturers through secret channels.

Of course, with Wang Bin's ability, it is definitely impossible to know these secret channels, but Master Zhou contacted these channels.

If it were the past, with Wang Bin's ability, even if he knew the channel, it would be very difficult for him to obtain foreign ultra-high precision CNC machine tools, and it could even be said that it was basically impossible.

However, with the breakthroughs in ultra-high precision CNC machine tools in China, foreign manufacturers now have much smaller restrictions on this aspect. As long as they have money and channels, they can still purchase these machine tools. However, if they are not obtained from special channels, foreign manufacturers also have very strict restrictions on these machine tools.

For example, the purpose of the machine tool is restricted, and the positioning system must be installed on the machine tool, and the repair cannot be dismantled and repaired privately, etc., and even more excessively, someone must be sent to supervise the use of the machine tool.

Fortunately, Wang Bin's machine tools were obtained from secret channels, and there were no many restrictions, and there were no messy things such as positioning systems.

Of course, since it is obtained from a secret channel, it naturally cannot get the support of the manufacturer in terms of maintenance. Once there is a problem with the machine tool, you can only solve it yourself.

After a series of operations, Wang Bin and his Tiangong Technology precision machining workshop had nearly 50 high-precision CNC machine tools. Of course, most of the machine tools were from domestic manufacturers. These machine tools include machine tools from Beizhong, machine tools from Southern Industry, miniature ultra-high-precision CNC machine tools from Jingdian and laser engraving machines.

Of course, due to the increase in the number of machine tools, Master Zhou is naturally no longer the operators of these machine tools. At this time, dozens of skilled masters were already in the workshop, and these masters were also invited by Wang Bin through various means.

Among them, some were recruited from society, some were dug from other machinery factories, and some were introduced by Master Zhou and others. In short, the precision processing workshop at this time was like a precision processing workshop.

When Wang Bin entered the workshop, he did not attract the attention of all the masters in the workshop. They were still busy working on their work attentively.

This is not an ordinary part, but a large bearing sleeve and bearing rotor processing with high precision requirements, so they must concentrate their attention, even if the machine tool they operate is a CNC machine tool.

Soon Wang Bin came to a large ultra-high precision CNC machine tool in the workshop and looked at Master Zhou who was processing high-precision bearing sleeves.

It can be seen that the bearing sleeve has been processed for more than half of the time before it can be completed, so Wang Bin did not disturb Master Zhou. It was not until the machine tool was completed and the measurement was completed that Wang Bin said to Master Zhou: "Master Zhou! How is the situation?"

Although Master Zhou and his team are still processing large bearings, they are no longer the same batch as before. The previous batch was completed as early as the New Year, and the batch of bearings that are being processed are actually an order later placed by 969 Group.

Of course, 969 Group was very satisfied with the first batch of turret bearings processed, so it once again placed an order for these large bearings to them Tiangong Technology.

Moreover, the orders for this batch of large bearings placed this time are not small, with a total of 500 sets, which is enough for them to work hard for a while.

After hearing Wang Bin's inquiry, Master Zhou discovered that Wang Bin was coming, so he said to Wang Bin: "Mr. Wang! The production of large high-precision bearings is very smooth and there is no situation. According to my judgment, if nothing unexpected happens, the order should be almost completed in about ten days!"

After hearing Master Zhou's words, Wang Bin nodded. He found that there were already several processed bearing sleeves next to Master Zhou at this time, and said, "These are all processed in the morning! Not bad. However, although the processing difficulty of these bearings is not very high, you can't take it lightly."

"Mr. Wang! Please rest assured, we are all masters, and there will definitely be no problems." Master Zhou replied.

Then, Wang Bin came to the production workshop of high-precision bearings, which is the high-precision bearing production line that Wang Bin applied to his superiors for approval last time. However, due to equipment, the maximum bearing diameter that this set of equipment can produce is only about 500 mm. At the same time, in addition to producing some ordinary models of ball and roller bearings, this set of production lines can also produce some special bearings.

Therefore, the previous turret bearings were not yet produced, but there was no problem with this production line for producing aircraft engines and bearings with diameters less than 500 mm.

The bearings that this production line is currently being produced by this production line, which is the ultra-high precision bearing ordered by Xifei from them, which is the core bearing of AVIC.
Chapter completed!