Since this second-generation superconducting battery has solved many problems with the first-generation battery,

Therefore, this battery can already be used on larger-diameter electromagnetic track guns as the source of energy for the track guns.

However, even this kind of battery can only provide energy support for 15mm caliber rail guns at the maximum. At the same time, even 15mm caliber rail guns can only be continuously fired about fifty times.

Of course, according to the law of mass and energy, the smaller the caliber of the orbital gun, the more it fires. For example, if it is a 6-7 mm caliber orbital gun, this superconducting battery can definitely support hundreds of continuous shootings.

Then there is the third generation of copper-based superconducting battery technology, which is the final copper-based superconducting battery technology input into his mind in the system. The energy density of this superconducting battery is higher, and it can reach a maximum of 100 kWh per kilogram.

At the same time, it can also be made larger in volume, and the maximum can even reach a volume of one cubic meter.

At the same time, in terms of instantaneous discharge voltage, it has made great progress compared to the second-generation technology, reaching 5,000 yuan. At the same time, like other copper-based superconducting batteries, it can directly release all the power in the battery within one second.

Of course, compared with the first and second generation copper-based superconducting battery technologies, the third generation is also the most difficult, and it is not easy to implement the third generation technology.

.............

Just as Wang Bin was working hard to realize the superconducting battery technology in his mind in the laboratory.

He didn't know that at this time, several bearing steel manufacturers that completely lost their market share in China did not admit their failure at all and were preparing to cause trouble.

Ruisi

In a conference room at the headquarters of Ruisi Precision Equipment Manufacturing Group, their group's executives had arrived except for the chairman of their group. Of course, this naturally included the person in charge of the Chinese market in their group.

"Hey! This time, our Rises Precision Equipment is one of the biggest losers in the reshuffle of China's high-end bearing steel! Apart from the abc and iron mother bearings of the bald eagle, we are the worst.

You should know that before this, our RiSi Group had a market share of nearly 20% in the high-end bearing market in China! It is one of the largest high-end bearing suppliers in the entire Chinese market. Even many official companies in China will use our bearings in large quantities, including military aspects. Now our bearings have become second-rate bearings!"

"Isn't it! This makes me wonder if I'm dreaming. You must know that the bearings produced by our group are absolutely advanced even if they are placed in the whole world! Now they are almost driven out of the Chinese market."

"It's really a hell. It's all because of the island country's Seiko Group and the Empire Precision Instrument Group. If they hadn't been the first to sell large amounts of high-end bearing steel in China, the high-end bearing manufacturers of the Chinese would not have obtained a large amount of real high-end bearing steel in such a short time. In the Chinese market, it would have been impossible for so many high-end bearings to appear all at once? This led to the high-end bearings exported to China being completely reduced to second-rate products. You must know that even if these bearings are placed in the world, there are not many companies or countries that can produce them!"

"Yes it is them? But the culprit is it? It is also a Tiangong special materials manufacturing company in China. If it weren't for their company selling the world's top bearing steel? The bearing manufacturers in China at a bargain price, the island country's precision and empire precision equipment? It wouldn't be possible that the world's top bearings and bearings would be sold to China? And we naturally wouldn't be able to become second-rate bearings."

"Yes, it's Chinese. If it weren't for this special materials of Tiangong, we wouldn't have to bear such a big loss.

You know, we have established several high-end bearing production factories in China! But with the situation in the bearing market completely changed? What we had invested before was completely wasted? If we calculated this way, if we were really driven out of the Chinese market, we would not only lose the bearing and bearing steel market, but also the factories we had invested in China before! All of this is blamed on the Tiangong Special Materials of China."

At this time, the senior executives of Ruisi Group pointed their finger at Tiangong Special Materials Company, a subsidiary of Tiangong Technology, Wang Bin, but they didn't think about it? Why did the island country Seiko and Imperial Precision Instruments Group lose their original share in this market reshuffle? Instead, their market share in China has increased a lot. The deeper reason is this? In fact, they are all very clear about it? But they are just unwilling to admit it.

However, just as the senior management of their group was talking about Tiangong Special Materials Company, the executive president of their company finally walked in quickly from the door of the conference room. However, at this time, their president's face was not good-looking, and even with great anger in his eyes.

In fact, he can't blame him for this. Before the meeting, their group had just held a board of directors. During the board of directors, he was sprayed by the company's directors for a whole morning. It can be said that in the mouths of the group's directors, he almost became synonymous with incompetent garbage. It can be said that no matter who hears these words, his face will not look good.

Seeing the face of the president of their company, the entire conference room suddenly became quiet. Looking at the face of their president, you know that if someone stands out, he will definitely become the unlucky person who vents his anger.

"I think everyone is very clear about the purpose of convening everyone to the meeting this time, which is for the bearing market in China.

Over the past period of time, China Tiangong Special Materials Company has developed a new type of international top-level bearing steel and has begun to provide a large number of major bearing manufacturers in China at bargain prices, which has directly led to the shrinking of our orders in the China bearing market.

In addition, the bearings and bearing steel produced by the two major companies of Island Country Seiko and Imperial Precision Instruments have made our company's bearing sales even worse. Even if we later took large-scale price reduction measures like Island Country Seiko and Imperial Precision Instruments, the two major companies have taken large-scale price reduction measures, it is no longer helpful. Our bearings have become second-rate products in the Chinese market.

So we must find a way to grab our original market in China. If you have any good solutions, you can speak freely and tell us what you want to discuss together whether it is feasible."

However, after the executive president of their company said this, after about 10 minutes, the entire conference room was quiet and no one offered any opinions at all, which made him even more annoyed.

So he yelled in anger: "What! Are you all mute? You are all executives and think tanks of our Riss Group. Do you ask you to find a way to do this little thing? You can't do it. Are you all for nothing? The company has spent so much money, what are you asking you to come here for!"

Just as the president of their company was furious and finished saying this, a person in the conference room finally stood up and said softly: "Mr. President, I suggest that the various types of bearings sold by our company in China, including top-level bearings, can continue to take price reduction measures, and reduce them to be cheaper than those produced by the two major companies, Island Country Seiko and Empire Precision Instruments.

At the same time, in terms of bearing steel, I remember that our company just developed a new bearing steel this year. According to the performance of this bearing steel, although it cannot reach the top level in the world, compared with the island country Seiko and Imperial Precision Instruments, the bearing steels sold by the two major companies in China have much more performance in various aspects.

So I think we can invest this bearing steel in the bearing steel market in China, and in terms of price, we can be even cheaper than Island Country Seiko and Empire Precision Instrument Group.

Although we have very small profit margins for sale in China at such a price and may even lose money, it can hit other bearing steel and bearing manufacturers in the Chinese market.

This includes the Island Country Precision Group, the Empire Precision Instrument Group, and the company in China that has just launched high-end bearing steel.

Although even if we do this, we will not completely defeat the island country Seiko Group and Imperial Precision Instruments Group in the Chinese market, at least the market share of these two companies in China can shrink, so that we can seize their market.

According to my investigation, Tiangong Special Materials Company was originally just a smelting company that produces ordinary special steel.

Therefore, the strength is very limited. At the same time, according to my estimate, the cost of this bearing steel produced by this bearing steel manufacturer in China is not cheap. After all, the performance of this bearing steel is there. The bearing steel sold by their enterprise should have very little profit at the current price.

So as long as we sell this bearing steel in China and sell it at a low price, I think it will not be difficult to regain market share.

Even if we can, we can directly reduce the price to the same or even lower price as the bearing steel sold by this company at a certain time. Then according to the scale of this company, it will not last long. At that time, whether it is acquiring this company or acquiring their technology, it is not up to us to decide.

And as long as this bearing steel company in China falls, China's bearing steel and bearing market will return to its original situation. At that time, the price of bearing steel and other products will not be decided by us."

The executive president looked at the person who stood up and spoke. It was the person in charge of the Chinese market in their company. At the same time, he knew the situation in the Chinese market the most. After listening to his words, the president's face improved much.

"A good idea! You can try it!" After saying that, he signaled the Chinese market leader to sit down first.
Chapter completed!