The special steel produced in the first trial production was not successful, and Wang Bin's face was not good-looking.

"Okay! Manager Yan." Wang Bin nodded and said.

After Wang Bin finished speaking, Manager Yan walked out of the workshop where they were and walked towards the workshop next to him.

Wang Bin walked towards the production line, came to the special steels that had just been listed, and squatted down and looked carefully.

Wang Bin was not very surprised that the smelting of special steel failed this time, because many people on the production line did not have the experience of smelting steel.

Even those who have some experience in smelting steel have only experience in smelting ordinary steel.

I have never smelted special steel, let alone the smelting method of each special steel is different, and the formula and technology are also very different. If it is the same as the last time I produced glass, it will be smelted at one time, which is what Wang Bin is surprised!

Then Wang Bin saw a little scrap from the failed smelting steel in the mold and took it to the laboratory in the new industrial zone to test the elements of these steels. When smelting, the workers were not sure about the added raw materials.

Like the old industrial zone, Wang Bin's laboratory is also in the new industrial zone. In addition to exceeding the old industrial zone's laboratories in area, the laboratory in the new industrial zone is far more advanced than the laboratory in the old industrial zone in terms of laboratory equipment.

In addition, Professor Hu, who was originally in the old industrial zone, had already been arranged by Wang Bin to the new industrial zone.

When Wang Bin entered the laboratory, Professor Hu and others were busy in the laboratory.

Of course, the R&D project of Professor Hu and others is still the project that Wang Bin gave to Professor Hu and others before, that is, the bearing steel formula process improvement project.

When Wang Bin entered the laboratory, Professor Hu also saw Wang Bin coming in, so he asked Wang Bin: "Mr. Wang! How is the trial production situation on the production line? Is the equipment able to operate normally?"

"Yes! Professor Hu, the special steel production line has been installed, and there are no problems with the production line during the trial production process.

But these workers on our production line are all novices, and the first furnace of special steel in the trial production process was not successfully smelted."

After saying that, Wang Bin handed the failed special bearing steel in his hand to Professor Hu, and then said: "Professor Hu, please see, this is the failed product smelted from this trial production. I want to test it, which link is wrong."

After taking the failed product from Wang Bin, Professor Hu also looked carefully for a while and said, "Mr. Wang, according to my judgment, this failed product seems to be not just a problem in the formula, but also the temperature is definitely wrong during the smelting process."

As he said that, Professor Hu turned around and found a piece of steel in the laboratory that seemed to be similar to this failed product and handed it to Wang Bin and continued: "Please look at Mr. Wang, this is the product we have improved in one failure in the experiment."

Wang Bin took the piece of steel handed over by Professor Hu and looked carefully. The surface of the steel was the same as the failed piece that Wang Bin gave to Professor Hu before, and it was also very dark.

At the same time, there was a little red like rust on it, but the red on this piece of steel was even redder than the failed product he handed to Professor Hu before.

However, seeing this piece of material, Wang Bin already knew the reason for the failed piece. As Professor Hu said, this is not just a problem in the addition of raw materials, but also workers have not mastered the smelting process.

This is also impossible. After all, most workers are novice, and failure is inevitable.

However, even if Wang Bin and the others knew the reason for the failure of this smelting, Wang Bin and the others still had to test the failed product so that they could more accurately know the data of the failed product.

Since the experimental equipment here is much more advanced than the old factory laboratory, the testing speed is much faster. In less than twenty minutes, the inspection data of the steel that failed to smelt at will come out.

As Professor Hu said, the various material content data of this failed product are not correct. Not only is the content of one material that does not match the data, but the quantity of multiple materials that does not match the data.

However, what surprised Wang Bin and Professor Hu and others was that the performance data of this failed product surprised Wang Bin and others. Although this steel is far inferior to the bearing steel they are preparing to produce in terms of hardness and wear resistance, it is higher than the bearing steel they are going to produce in terms of high temperature and load resistance.

In other words, the failed product that the workers failed to smelt this time is still a very excellent high-temperature resistant special steel. Its highest high-temperature resistance actually reaches a high temperature of 2561 degrees. It is also very excellent in load resistance. In addition, it also has very sales performance in terms of tensile resistance, earthquake resistance, fatigue resistance, etc.

What Wang Bin and Professor Hu and others even more unexpected was that the red on this material was like rust, and its high temperature resistance was even better, reaching 2646 degrees.

When Wang Bin and Professor Hu saw the performance of this material, they both thought of this material at the first time, which can definitely be used to make high-temperature blades of high-performance aircraft engines.

So, Wang Bin asked Professor Hu to record the data of this material immediately, and also asked Professor Hu to study this material to see if it can stabilize the performance of this material, preferably all of which are like red rust spots.

Professor Hu also attaches great importance to this, and he immediately recorded the formula and performance of this material.

At the same time, he walked out of the laboratory with Wang Bin and asked the workers who were smelting just now, so that they could recall every step in the smelting process just now.

Of course, at this time, Wang Bin's face no longer had the depressed look he had before, but was very happy. This mistake by the workers made him accidentally get a new special metal, which can still be used as the material for high-temperature blades of the aircraft engine. How could he be unhappy?

After Professor Hu asked about the workers about matters, he returned to the laboratory, while Wang Bin did not follow him.

He asked the workers to continue to try to smel special bearing steel, and before smelting, Wang Bin also specially told the workers that they must strictly follow the formula technology to operate the equipment.

What made Wang Bin depressed was that the second smelting failed. Of course, the failed products smelted this time had no effect at all. Not every failure could be like the previous one, with the patronage of the goddess of luck, allowing them to obtain a new material from Tiangong Technology.

Things that made Wang Bin even more depressed were still ahead. During the subsequent production and smelting process, they failed four or five times in a row, which made Wang Bin and these workers look very ugly.
Chapter completed!