Seeing Yue Feng's clear statement, Si Geer naturally had no reason to refuse. He nodded, turned around and entered the operation room.
Si Geer did not greet Yue Feng when he entered the operation room, so Yue Feng shamelessly followed him in.
Entering the operation room, Si Geer's whole state seemed to be a completely different person.
Although he has a bit of a bad taste in inventions and creations, his professionalism is still in place. Like Yue Feng's previous engineering teacher Harry Yang, he is a master with extremely high talent and serious attitude towards this field.
After Si Geer entered the work station, he quickly began to make preliminary preparations for material processing.
Several materials were quickly prepared, and then the super alloy began to be smelted on site. As the founder of the invention, Si Geer was very proficient in making this alloy, and he easily made the alloy in person.
Looking at the metal ingot that had been cast and cooled, Yue Feng's eyes were slightly startled.
This luster and texture seem like I’ve never seen them before!
For a moment, Yue Feng's mind started thinking at high speed.
He was certain that this was definitely not an illusion. He must have seen metal with this texture somewhere before!
With doubts, Yue Feng raised his hand and picked up one of the metal ingots.
After getting it, it was extremely light. An alloy ingot of the same volume might not even weigh half as much as a refined black iron ingot. Yue Feng couldn't help but comment in his heart.
Refined Dark Iron Ingot!
When Yue Feng thought of this word, a reaction came to his mind instantly.
I remembered that the metal on the spacecraft at the Eldar Advance Base had this kind of luster and texture.
Si Geer was slightly dissatisfied with Yue Feng's behavior in handling the material. He looked at him deeply, and then used a clamp to clamp the material back into another melting furnace.
After secondary melting and appropriate addition of some auxiliary materials, the gun barrel can be poured into a mold. As for the job of pouring a precision rifled tube, for a master of Si Geer's level, it is indeed almost like making a toy!
The alloy solution is poured into the mold and formed in one go. In less than ten minutes, a shiny alloy gun barrel blank is freshly produced.
While Si Geer was polishing and cleaning the rough parts and doing trivial processing work, Yue Feng couldn't help but ask: "Master Si Geer, I have a question to ask you! If a material of the level of super alloy, if
If there is no magic smelting furnace, how can it be divided or even processed in the wild? Is there any way?"
Hearing Yue Feng's very unprofessional question, Si Geer suppressed a frown.
"Super alloy requires a high temperature of at least 2,300 degrees and certain catalyst auxiliary materials to melt! If you want to complete the separation, you only need to exceed this temperature! However, high-temperature melting devices are generally powered by large magic arrays, and temporary construction is very difficult.
Big and very expensive!
If you have to find a suitable method, there is a high-level fire magic called plasma flame, which may melt the super alloy! By the way, some high-level ion weapons may also be able to melt the super alloy if the ion vibration frequency is appropriate.
Cut this material!
Why do you ask this?"
"Um, it's okay, I'm just curious, just asking!" After hearing the answer, Yue Feng waved his hand and did not answer the truth.
Si Geer didn't take this matter to heart at first. Seeing that Yue Feng had no intention of continuing to inquire further and did not continue on this topic, he quickly used the finest special emery sandpaper to polish the blank for the final time.
Start the next process.
Precision rifled tubes, according to the normal manufacturing process, the rifling on the inner wall is etched with a special potion, but if the material is changed to super alloy, this method obviously cannot be used.
The corrosion resistance of super alloys is several times higher than that of previous materials. The etching process is very difficult. Even if there is a substance that can etch the alloy, the cost may be higher than the cost of the alloy itself, which is not cost-effective.
However, this kind of small problem naturally cannot trouble Si Geer.
After checking the polished barrel again, he went directly to a special lathe near the corner of the operation room.
The outside of the barrel was wrapped with material and fixed, and then Sigel took out the special boring tool from the tool rack.
Yes, you read that right, Sigel actually chose to use manual rifling to make this barrel.
Yue Feng's success rate is less than 10% for those who are brave enough to draw rifling by hand, even for ordinary metal materials. Although it is not difficult to get started with this craft, it is surprisingly difficult to improve your proficiency.
The next operation gave Yue Feng a new understanding of the craftsmanship of the engineering master NPC. Relying on this set of crude-looking tools and a pair of hands, Si Geer successfully pulled out the perfect alloy barrel.
Spiral rifling.
Half an hour later, Si Geer removed the barrel of the gun and checked it one last time before handing it to Yue Feng: "Here, the precision rifled tube you want is ready!"
[Perfect special precision rifled tube]: The special precision rifled tube is hand-made by the great inventor Si Geer. Because it uses super alloy as the material, it retains the original performance while also gaining additional benefits.
characteristics.
Additional features of accessories: [Super strong] [Absolute tolerance]
[Super Strong]: Under normal excitation use, the natural wear and tear of the barrel rifling is reduced to 10% of the normal value.
[Absolute Tolerance]: The product produced by the master must be a high-quality product. The ultra-high rifling accuracy gives this barrel ultra-high accuracy, and the additional hit rate correction is increased by 50%.
Good guy, a special gun barrel has a grade rating of dark gold and has two additional characteristics!
In an instant, Yue Feng's breathing became rapid.
Damn it, if you were just a little bit lucky, wouldn't you be able to make dark gold-grade man-made equipment? And it's also the most practical goblin musket among the special engineering equipment products!
"Uh, what's that! Master Si Geer, can I make an excessive request! You have already made the barrel of the gun, can you please help me assemble the new musket! I'm afraid I'm despicable and rough.
The craftsmanship has tarnished the barrel of this work of art!" Yue Feng shamelessly turned on the licking mode.
"Do you have any drawings? Bring them over!" Si Geer did not make it difficult for him, but agreed happily.
Upon seeing this, Yue Feng decisively took out the production drawings for Kaishan No. 2.
"Well, just follow this drawing! I'm really looking forward to your artwork now!"
Si Geer didn't have any expectations for the blueprint. It was just a blueprint of a goblin musket that was almost a toy. How sophisticated could it be?
But when I glanced at it from the corner of my eye, I couldn't look away anymore.
The Chapter of Inheritance has been upgraded and improved to a perfect blueprint. Even if it is just a low-level product, it must be unique. The more you understand the subject of engineering, the more you can feel the beauty of the design.
Obviously, at Si Geer's level, he is very sensitive to the details in this kind of drawings, and he can see what's special at a glance!
