In addition to the country bumpkin magician who was able to survive the troubles of the empire, another thing that has been discussed by everyone is the evaluation given by the Demon Prince. Is it appropriate for such a person to still have a thin golden thread?
Among all the branches of the Magician Association, the Feist District where the Holy City of Estali is located is recognized as the branch that is most difficult to obtain recognition as a 'Grand Magician'.
Don't look at the fact that the number of great magicians operating in Estali is far greater than that in other places. This is because there are more amazing magicians here. To be recognized in the First District, which one does not have an proud reputation?
With great achievements, he is also a experienced and qualified magician.
So, should we give this magician who can survive the Demon Prince a second golden thread that symbolizes his identity? If the rumors of fighting that one and surviving are true, there is no doubt about his strength. But because of this
The magicians couldn't help but laugh at themselves as they were awarded the second golden thread for some reason.
In addition to relying on merit and strength to be recognized as a great magician by everyone, there are other ways. After all, magicians still pay great attention to knowledge, so if you submit enough advanced magic knowledge, you have a chance to be recognized.
Just like in the history of magicians, there are also people who are recognized as great magicians because they have contributed knowledge of strategic magic. But usually such magicians have accumulated considerable achievements and reputations.
It just lacked a finishing touch. Then he showed off his special skills and got everyone's nod of approval.
But all in all, this is also a method. So some staff from the First District Chapter approached Lin, hoping that he could offer enough magic to represent his strength to convince everyone and successfully obtain the second golden thread.
The reason why this clerk is so active is because the clerk who previously rejected the submission of mathematics knowledge has now been assigned to a corner to do so.
Of course, Lin was happy to cooperate with such a request. He also knew that he did not necessarily need to show off all his special skills. It was enough to have a prototype so that others could get started. In history, those who handed over strategic-level magic knowledge
There is no magician who did not hide a trump card when he was alive and only handed over the skin. Those who dare to hand it over must have more powerful magic in their hands.
Lin did not hand over all the magic formations carved on his dream tower, because the amount was too much and too complicated. It was so complicated that it was quite troublesome for him to go back and check or change it. It was necessary.
If my memory is not good enough now, I will not be able to figure out which section of grammar does what.
After sorting it out, the magical knowledge handed over was based on the light technique and the star movement charts studied during the Great Sage's Tower era. Lin did not hand over all the records of the thousands of stars he had observed, but astrology.
The one thousand five hundred and seventy-nine stars that will be used? They form the Midland version of the astrological star chart.
This can be said to be the starting point of all my abilities. Do you have this picture? And keep verifying and modifying your mathematical formulas? Then you meet the World Tree, and that’s how you become what you are today. It can also be said that you can’t understand this picture.
Picture, you don’t have to think about the knowledge behind it.
But the result was just as he had guessed, and no one could understand it. The white-haired bearded magicians in the math class were still scratching their hair for trigonometric functions. How many of them could play calculus?
Basic astrophysics?
There were even senior officials from the Magician Association who wanted to transfer him to explain. After Lin went to the headmaster of Kabamba Academy, he simply ignored such a request and responded with the words he had said publicly.
? Is it my fault that you don’t understand because you don’t have enough wisdom?
If it had been a few years earlier, Lin would still be interested in the false title of 'Great Magician'. But after reaching a certain age and a certain height, a false name is just a false name? If it cannot be replaced with something real? In fact, there is nothing good about it.
pursued.
Just like the Lich's usual attitude, she never rushes to log in to her identity as a great magician after arriving in a new magician association division. She also doesn't care what others call her, although this is only most of the time.
If you dare to call her "old woman" in front of her, you will immediately be reincarnated. In short, Fen believes that as long as she has the ability to beat others to the point of calling her mother, there is no difference in what others call her.
The two golden threads of the 'Great Magician' can easily earn the respect of people you meet for the first time, just like diplomas from major universities on earth. But in the end, to make people admire and admire them from the bottom of their hearts, it is still
Look at what you do. For many veteran great magicians in Estali, their titles are more a matter of course, not something they deliberately pursue.
Once your mentality is correct, many things won't matter. In other words, even if you really actively strive for the title of 'Great Magician', there will actually be no real benefits.
My recent focus is on clothes made of magic silk, which are life-saving equipment. Even if I have the title of 'Great Magician', I won't have defense +10 and wisdom +20 like in the game.
Such title bonus effects.
But compared to the development of the jacquard machine, the printing press has recently produced quite gratifying results.
The production process of magic scrolls in a magic world is comparable to the automobile industry in the technological world. Even if it does not use the most advanced technology, it is definitely a mainstay product in terms of practicality and economy. Naturally, in
The accumulation of various skills will be very rich.
What the Manroland printing press has improved is only the process of making magic scrolls. The materials and ink types required for the scrolls have already been accumulated in the long history of the land. What the president of Kabamba Academy has to do is
It is to find the most suitable material for printing and the type of magic scroll.
In this regard, the resources that Dean Kabamba has at his disposal are far from being comparable to that of a little magician from outside the country or a lich who has been resurrected after a thousand years. Even if the same job is done by
If Lin were to do it himself, he might not be able to get results so quickly, or there might even be no results at all. A certain partial subject would be very wrong.
Of course, Lin was not completely without contribution during the research process. In addition to suggesting segmented printing, the most common thing to do was to modify the Manroland printing press according to the needs put forward by the dean.
Just because I don't want to put too much effort into the research of printing magic scrolls doesn't mean that I don't want to get a share of the results. Rather than letting my own people study and understand the mechanical structure, and then modify the printing machine, Kabanbai
The dean of the college chose a simpler way, which was to let people who knew better help them correct it.
Compared with the jacquard machine at home, the changes that will be made here are as simple as drizzle. The biggest structural change is to change the machine to automatically replace multiple printing relief plates when segmented printing is proposed.
, as well as the way of paper in and out and transportation. In addition, the gap of the paper feed roller is adjusted so that it can adapt to various thicknesses of paper or non-paper printing carriers.
But because most of the Manroland printing presses use ordinary metal, any modification is not as easy as the jacquard machine at home. Therefore, it must be entrusted to the technical guild set up by Uzov Gantia.
Craftsman finished.
It takes a lot of time to go back and forth and change a small part. But as mentioned before, the modification of the machine is a minor detail in the magic scroll printing process. Whether it is completed or not is not so urgent, everyone is still
There are many more important experiments to be done.
The great progress in the printing process of magic scrolls is of course not the discovery of a method that can be printed completely. Instead, it refers to the segmented printing mentioned by someone before, extended this concept, and found the transcription of a magic scroll.
Among them, the parts that are not necessarily completed by manpower, and those parts must be written down by the magician or apprentice one by one.
The difference is that, basically, as long as a complete magic scroll is not used, its ability to cast magic can theoretically be maintained. Just like a magic stone that is left unused, the power contained within it will interact with the outside world.
Make exchanges, keep some, and spill some, until the upper limit of the magic stone storage is reached.
The so-called upper limit of storage is actually a balance between the amount of power exchanged between the magic stone and the outside world. This upper limit depends on the quality of the magic stone. The higher the quality of the magic stone, the more power it can store.
The more.
This is why ordinary paper and ordinary ink are difficult to use to make magic scrolls. Because they cannot retain power at all, and that energy will in turn become the culprit of destroying the carrier.
The semi-finished product of the magic scroll is like a machine that has not yet formed a loop and cannot stop running autonomously. This kind of machine will only continue to waste and lose until the energy is nearly exhausted, or the machine is damaged. And this process, some
Fast, a little slow.
The reason for the slow speed is still unknown. However, the magic scroll printing research group led by the Dean of Kabamba Academy hopes to find those parts that dissipate slowly after printing and use them for printing.
Although the reason is still not clear, some conclusions can still be drawn by using the most primitive research methods in the field, that is, the exhaustive method and the trial and error method. Of course, this action of induction was given by someone
Suggestion. Easy to understand, but easy to use.
First of all, when line-type runes exist alone, they can last longer than spell-type words.
Second, spell-like text cannot be overprinted; that is to say, only one letter is printed in the first printing, two letters are printed in the second time, and three letters are printed in the third time, in an attempt to extend the time for the power to spread.
Doing this will cause the magic to go out of control, and then there will be a gorgeous explosion. Therefore, if the text is to be printed, it must be printed properly and not messed up.
Third, when multiple parts with different durations are printed on the same carrier, the duration is determined by the shortest one, not by any average or weighted average method. It’s like filling a bucket with water.
The capacity depends on the shortest board.
Fourth, let alone printing, there will be problems if some text is engraved on a printing relief plate! No matter whether the relief plate is made of magic materials or ordinary materials. This is also the reason why magic scrolls cannot be completely separated from manual production.