Zhao Ye came to his office, opened a large safe here, and took out some information inside.
Sure enough, some of the technical information that I planned to give to the photovoltaic team was left unsealed here. No wonder it is in that state over there, and I can’t blame them entirely.
He opened the information and looked at it. Well, it turned out that he hadn't finished it at that time, so he just put it here.
What else can I say? Just keep writing.
The measurement method that meets Zhao Ye's current needs is the three-dimensional reflection measurement method. Although this measurement method is not suitable for measuring distances exceeding two meters, its advantage is that it has extremely high accuracy.
In later data, the error of this measurement method can be controlled to 1 micron. It is a common measurement method in CNC equipment.
Based on this measurement method, there is a special set of algorithms. This is not a problem. The key is that the precision of their photosensitive elements and the response speed of the calculation circuit cannot meet the requirements of future generations. Therefore, there is currently no way to pursue the ultimate precision.
Meaningless.
Besides, he doesn't need that kind of accuracy now. Furthermore, in the information Zhao Ye wrote to the radio and television measurement team, he only looked forward to the future of this technology and set an unattainable goal for the researchers.
Never mind.
The accuracy he currently proposes is within 3-5 microns. This is enough now. At least for now, their chips with a process of more than ten microns are enough. Even if the second-generation lithography machine is modified in the future, it will basically be enough.
of.
Zhao Ye wrote in various ways for another day, and finally completed this part of the work before dark.
Call a soldier and ask him to send the completed information to the other side and hand it over to Director Dong.
Director Dong will naturally arrange these things, so Zhao Ye doesn't have to worry about it.
He wanted to be lazy today and go to bed early. In the past month, he had not had a complete and good night's sleep. Even with his iron-clad body, he felt that he was almost unable to endure it during this period.
Lying in bed, he couldn't sleep for a while. The irregular schedule for a month had caused his biological clock to become a bit disordered.
Alas, I don’t know what Sister Ding will do at this time. Do you think I’ve neglected her too much? Will she be sulking alone?
Zhao Ye was thinking wildly. At this moment, he suddenly felt that it would be great if he had a phone call. At least it could relieve the pain of lovesickness.
Amidst such random thoughts, Zhao Ye also fell into sleep.
Early the next morning, he was resurrected and devoted himself to his new work. Today he did not go to the Microelectronics Institute early. Now the work there is basically on track, and he does not have to go there every day to keep an eye on it.
.
Now he has to solve the mechanical structure part. The control system has been gradually advanced, so the mechanical system cannot be pulled down. Otherwise, the control system will be a rootless tree. Without the mechanical system, it will have no room to function.
Zhao Ye did not stay in the office or basement this time, but came to the administration building of the joint factory to find his master.
After knocking on the door and entering, Zhao Ye first reported the work progress during this period to Director Yang. Director Yang was also very happy when he heard that the control system was making steady progress. However, he was not happy for more than two minutes.
He was extinguished by a basin of cold water from Zhao Ye.
The design and manufacturing of mechanical structures is also an important and difficult point.
Regarding the issue of Jingyi Machinery, there have been many squabbles and lawsuits with them this month. Director Yang went to the superior department several times, but there was no big progress. The United Factory is a big factory, and Jingyi Machinery is even bigger! Both of them
They were about the same size, so the superior leaders could only coordinate. Jingyi Machinery said it couldn’t do it, and no one could do anything about it. The key is that Jingyiji Machinery was also professional, and with well-prepared materials, it silenced Factory Director Yang’s questions.
Speechless.
Factory Director Yang couldn't refute it. Apart from his confidence in his apprentice, he couldn't provide any technical support. In this war of words, he was obviously going to be at a disadvantage.
The master and apprentice stared at each other for a while. Zhao Ye gritted his teeth and said: "Master, why don't we just do it ourselves? I don't believe it yet. With my skills, I can't make it for automation."
?”
Factory Director Yang just glanced at him and didn't answer. This was obviously Zhao Ye's venting words. If nothing else, the servo motor was something that their joint factory could not handle.
It's no problem to get an ordinary motor, but if it's a motor used in the field of precision control, haha, just go to sleep.
Zhao Ye does have a technical plan, but he has no processing equipment and processing experience. He also has no application experience. This cannot be done with a book of materials. If it were that simple, there would be industrial powers everywhere in the world.
Just when the two of them were at a loss what to do, Chen Gong from the technical department came to see Factory Director Yang about something.
While Director Yang was looking at the information brought by Worker Chen, Worker Chen was also concerned about the progress of Zhao Ye. Hearing that he was currently stuck on the design and manufacturing of the mechanical structure, he couldn't help but curiously asked a few more questions.
sentence.
Zhao Ye thought it was no big deal anyway, so he started talking to Chen Gong. After hearing Zhao Ye's plan, he was also very happy that Zhao Ye was ready to apply so many new technologies.
People who work in technology are like this. Once they hear about something new, they want to get started with it. However, there is no finished product now and it is still in the experimental stage, so he has given up on that idea.
Director Yang did not listen to their chat, but looked at the information in his hand seriously.
This is a piece of machine tool information sent by Shenji. The last batch of equipment really troubled the joint factory. If Zhao Ye hadn't been technically competent, he might not have been able to solve so many problems in the end.
This time, another Shenji equipment came over, so he had to take it seriously.
"Will the other party send someone to take care of the equipment this time?" Director Yang asked Chen Gongdao.
"Yes, five people were sent, one engineer, three technicians, and one logistics person." Chen Gong replied honestly.
"Well, you have to pay more attention this time and pay closer attention. If you don't meet our requirements, you will definitely not be able to pass the inspection. It is their equipment, of course they have to be responsible for debugging it for us. This is a matter of principle, any
People can't let go." Director Yang emphasized.
"Yes, don't worry, factory director, I will personally watch them this time and inspect them personally. I will definitely let them do a good job for us before letting them go." Chen Gong said very firmly.
"Well, that's it, go ahead and do your work." Director Yang signed the document and asked Worker Chen to take it away.
When Mr. Chen came to the workshop with the documents, the people who came from Shenji were milling around a gantry milling machine.
"Hey! I mean, Mr. Zhou, why did you start studying this?" Mr. Chen saw that Zhou Dajiang, the engineer from Shen Ji, was staring at the milling machine, and he couldn't help but want to make a joke on him.
"Hey? Mr. Chen is here, I was just looking for you." When Mr. Zhou saw Mr. Chen, he immediately walked towards him, and then without saying a word, he pulled him to the side of the milling machine.
Mr. Chen was a bit confused by what he was doing, and he thought to himself, what kind of trouble are you going to make like this?
"Mr. Chen, tell me, who did you find to modify this milling machine?" Gong Zhou asked, staring at Gong Chen.
"Renovation? Who else can we ask? The fitter in our factory." Mr. Chen didn't understand what Zhou Gong meant for a while, but it was indeed the fitter in their factory who renovated it.
"A fitter in your factory? How is this possible?" Zhou Gong shook his head and said.
"Is this impossible? The accuracy of the guide rails and screw rods of this milling machine is so poor that the fitters in our factory chewed them out bit by bit, and that's how we achieved the current accuracy."
"Did the fitter in your factory really chew it?" Zhou asked again in confusion.
"Why did I lie to you? You didn't invite me to dinner."
"Hey! How about giving this person to us to sink the machine? I'll trade these three people for you!" He said, pointing to the three people who were measuring the workpieces produced by the milling machine just now. Among these three people, two
One is his apprentice, and the other is an excellent fitter in the factory, who is currently a level 6 fitter. Even his apprentice is also a level 5 fitter.
Such workers generally would not go on business trips. But this person came to the capital, which attracted a lot of attention at the time. Several senior workers did not regard the task of this person as work at all, and they came here purely for a trip at public expense.
It comes from their mentality. For them, work is just a matter of convenience.
But it is such a travel-style job opportunity, and this weekly worker (master) will trade them with the other party. Anyway, you should discuss it with us. Although we will definitely not refuse you, but there is no way.
It's impossible to go to your side!" Chen Gong answered Zhou Gong's question with a smile.
"Ah! Director Yang's apprentice, that's no wonder. But why are you still going to school? How old is he to still go to school?"
"He's not even twenty yet. Isn't he just in school?" Chen Gonghe replied proudly.
"So young? Impossible!" Zhou Gong expressed doubts. Locksmithing is not like other types of work. It relies on both talent and experience. A young boy who is less than 20 years old has been practicing since he was born.
To be able to reach such a level in twenty years is a genius.
"Hehe, you are so awesome! Don't think about it anymore. Our factory will never let anyone go. Hahaha."
"Can I meet this young man?" Zhou Gong asked the next best thing.
"You can see him if you see him. He happened to be here today. But now he is worried about Jing Yiji. I advise you to wait for two days before talking about it."
"Jingyiji? Why did Jingyiji offend you?"
"Hey! Those bastards are so stupid. Here's what happened. Let me tell you..." So, in the workshop, Worker Chen told Worker Zhou who came from Shen Ji exactly what happened that day.
But Zhou Gong's interest was aroused. You know, they also want to develop CNC machine tools. They also have several computers.
However, this CNC machine tool does not just need a computer, it requires many different things.
Now I heard that Jingyi Machinery actually rejected the cooperation request of the joint factory, wouldn't there be a chance for Shenyang Machinery themselves? Moreover, when it comes to machine tool manufacturing alone, they Shenyang Machinery looks down on Jingyi Machinery. Isn't it just to cooperate with Shuimu University?
I bought a CNC machine tool and saw how good they were. Zhou Gong said that he had long disliked them.