Zhao Ye went to the United Factory in the afternoon. It was very close and he could arrive just after leaving the school gate.
Zhao Ye is quite familiar with the situation here. After all, he comes here often, but he hasn’t come much in the past two months. After all, he is busy with experiments and doesn’t have that much time every day.
From the moment he entered the gate, Zhao Ye felt something was a little awkward, but he couldn't explain it. It wasn't until he entered the workshop that he suddenly realized it.
The neat workshop I saw last time has been transformed in all sorts of strange ways.
In order to cooperate with the installation of production equipment, especially the installation of simple production machine tools, almost every work station has been modified differently.
For example, a large boring machine has no bed frame and only a machine head installed alone on a stone.
Even the several-meter-long bed platform is replaced with stone slabs.
In order to facilitate operation, a trench of tens of centimeters was dug on both sides.
Not to mention the ditch, the machine head is just installed on the stone. How can this ensure accuracy?
Walking and looking all the way, every machine tool is full of strange things.
Finally, when I walked to the workshop director, he didn't even know what to say.
In fact, everyone knows that it is difficult to ensure that a transistor production line can be manufactured according to quality and quantity. However, the reality is this, and they are doing nothing!
There was no verbal communication with the workshop director, so what could be said? The two just cried and laughed at each other, and then they both understood the other's helplessness.
Zhao Ye did not waste any time and walked directly into the administration building. At this time, it was not yet time to go to work, and Factory Manager Yang might be in the office here.
Zhao Ye guessed half of it right. Director Yang was indeed here, but was in a meeting.
Zhao Ye listened outside the conference room for a while and then walked away silently.
Just like Professor Ci said, there are many things that he is powerless to do. Some opinions cannot be expressed casually.
He is engaged in technology, and all he can do is think about how to use technical means to solve or make up for the difficulties and obstacles encountered in reality.
He walked out thoughtfully and returned to the workshop again.
Looking at the different types of equipment here, Zhao Ye took a deep breath and walked towards one of them.
No matter how much you say, it’s better to solve one problem! Zhao Ye wanted to see how to save the production equipment here so that it can achieve the required functions.
Seeing Zhao Ye coming back from outside, the workshop director came over again. He was more anxious than anyone else. If he could not complete the production tasks, he was the first person responsible.
However, there were too many problems encountered during the previous trial production.
It is still a good thing that the existing equipment cannot process, at least the responsibility is not his!
But the issue of precision is his responsibility. How to use these simple machine tools to produce products with compound precision requirements is a problem that can drive people crazy.
Zhao Ye didn't think about anything else. Even when the workshop director walked up to him, he didn't look back. He devoted himself wholeheartedly to this piece of equipment, carefully "studying" how to make it play its due role.
This is an ordinary lathe shipped from a heavy machine tool factory. Well, it does not have a bed.
But it was still conscientious, and the screws and guide rails were provided. So how to install it? The workers equipped it with a large wooden stool!
Zhao Ye is really pissed off! Not to mention the accuracy of this thing, if it is done like this, it is very easy to cause production accidents!
After watching it for a while, Zhao Ye started to think twice, so he moved on to the next one...
For a whole afternoon, he looked at one after another like this. He didn't miss any one.
The system in his mind also helped him come up with one improvement plan after another.
He asked the director to assign a number to each piece of equipment according to his requirements. Then he recorded the improvement plan for each number in his mind.
After dinner, he walked to the administration building again and wanted to give a detailed report to Director Yang.
But when he came here, the meeting was still in progress!
Aren’t these people tired and hungry?
I was about to eavesdrop outside the door for a while, but suddenly the door was opened from the inside. The man was stunned when he saw Zhao Ye, and then subconsciously shouted "Yezi"!
"Mr. Chen, have you finished the meeting?" Zhao Ye saw him coming out and thought that the meeting was finally over.
"No way, you go in first, I have to go to the toilet." Without any more nonsense, Chen Gong hurriedly passed by Zhao Ye.
Go in? He doesn’t want to go in!
However, as soon as the door opened, many people noticed him. Director Yang also saw Zhao Ye at a glance and called him in.
"Zhao Ye, come in quickly!" Director Yang said. He didn't want to go in.
"Director Yang, leaders, I'm late." Zhao Ye was as low-key as ever.
"Well, have you seen it in the workshop?" Director Yang asked this as soon as he came.
"Yes, I've seen it." Zhao Ye answered honestly.
"Okay, you can sit over there first." He said, pointing to a row of benches against the wall of the conference room. There were indeed several people sitting there, some they knew and some they didn't.
The meeting started again, and Zhao Ye knew after listening for a while that he was still discussing the issues he heard in the afternoon.
But the only thing that surprised him was that the man in military uniform at the conference table was really a soldier.
In this era, military uniforms have almost become a kind of popular clothing. If you want to judge whether a person is a real soldier, you basically rely on the collar badge. Zhao Ye didn't see the angle problem before, but now listening to the other party's speech, he knows
This is a military representative.
This production line is provided for Factory 718, and Factory 718 is a military factory. If you think about it this way, it makes sense for someone to send someone over to keep an eye on your production.
The main issue now has been the production line, whether it can be delivered to the production line in a timely manner with sufficient quality and quantity. The pressure on the joint factory is very high, and the previous trial production situation was very bad. However, in such a meeting on site, no one can say
The real reason. The military representative said that if the quality is still the same as the previous trial production, it would be better not to produce it, because once it is produced, the military will not be able to use it.
But what if we don’t produce? This is a production task assigned by superiors. If the other party didn’t have such an identity and attitude, maybe the United Factory would have done it for him directly.
As for the accuracy being too poor, there is nothing we can do about it.
It's a pity that the other party is a military factory. Who dares to make excuses for national defense needs?
Zhao Ye couldn't stand listening to the meeting that kept talking nonsense. He thought about the impact of this matter and it should be within his tolerance, then he found a gap and stood up.
"Factory director, fellow leaders, I think that if we want to successfully complete our production tasks, the first step is to transform our production equipment so that it can meet our accuracy requirements as much as possible."
Zhao Ye's words were like a stone thrown on the ground, leaving nothing but a sound.
Zhao Ye didn't think that he would shock everyone with his skills as soon as he spoke, but continued according to his own ideas: "I just looked at our equipment, and there is still a lot of room for improvement in many of the equipment. For example..." Zhao Ye
According to the plan I compiled in the afternoon, I began to describe step by step, one step at a time.
At the beginning, everyone didn’t take it too seriously. It’s not like they hadn’t thought of some solutions. However, for the entire production task, it was just a drop in the bucket and could not play a decisive role.
However, Zhao Ye made some mistakes. While describing the equipment, he adjusted and changed his production plan and production process requirements.
Without reducing the quality of the product, an almost new production plan was reorganized. Even the final production method of this production line has been modified to a certain extent.
This is also his biggest advantage, because this production line will ultimately produce the products he proposed. The key technical processes for production were also drawn up by him.
Faced with this process requirement, others designed this production line and then handed it over to the United Factory to manufacture this production line.
Now that the joint factory is facing the dilemma of insufficient equipment and insufficient precision, it is better to change the product. If you want to say whether it is possible to change the business like this, hey, haven't you seen the designer of the final product sitting here?
Isn’t our purpose in producing this production line also to produce other people’s final products? If he said it can be done, then I guess it can be done.
The people here are all engaged in technology and production, but there are not many people who are engaged in transistors. As for Zhao Ye, he "happens" to know a little about everything. He can completely choose another path.
Although the entire meeting had been going on for a day, it really reached its climax when Zhao Ye started speaking.
The plans were put forward one by one. Zhao Ye had already thought of this. Several Shuimu students in charge of recording had given up thinking. There was really no time to think about it, and the pen in their hand was about to break.
According to the numbering that Zhao Ye assigned to the equipment in the afternoon, each modification plan was proposed in the meeting.
It's a bit exaggerated to say that technical people are fascinated by it, but if you admire it, you really admire it!
The administrative staff were even more happy because finally there was someone who could solve practical problems. Regardless of his identity, he would be the savior of the United Factory from now on.
Especially the military representative, he was the happiest person in the audience. He finally saw hope.
In fact, he had been so insistent before, but there was nothing he could do about it. This was a matter involving national defense and security, and he could not tolerate any favoritism. But looking at the production equipment received here, to be honest, he couldn't bear it.
of.
Who has ever seen a lathe placed on a wooden bench? He has seen it, and he also uses this thing to ensure processing accuracy! What kind of worker can do this? When the worker goes up, the first thing he should consider is how to
Don’t be crushed to death by the machine!
So in Zhao Ye's plan, it was changed to a stone base. Masonry or concrete was used under the stone slab, and then the stone slab was polished and then installed by a fitter to correct the accuracy. Then the lathe could basically be used.
There are countless similar modifications made by local methods. Zhao Ye doesn't want to do this, but this is a last resort.