Lin Yu put the belt into the card slot of the engraving machine, and various energy circuit templates popped up on the screen.
All are belted.
Some are complex and some are simple.
Of course he chose the simplest one, and then placed his right hand on the button aside.
Buttons can also be powered and pressed.
The faster you press, the more energy is injected, and the deeper the groove is carved, which speeds up the flow of energy.
If the groove is too deep, it will increase the consumption of cards, and the gain will outweigh the loss.
If the groove is too shallow, it will hinder the flow of energy and prevent the card from being activated normally.
This is also a skilled process.
As the button is pressed, the energy-containing cone comes into contact with the mold.
After selecting the template, the carving route is fixed, and the manufacturer only needs to control the depth of carving.
It is much easier than outlining the energy circuit alone and then describing it.
Zizzi!
The sound sounded and the mold began to rotate. Lin Yu tried his best to keep the energy input steady and kept the buttons in his hands steady.
Looking at the template prompt on the screen aside, the next groove should be one centimeter deep.
He pressed the button slightly hard, and the mold prompted that the engraving failed.
He didn't find it strange that there was an error of 0.5 centimeters, so he continued to draw as a practice.
Kavu made of each material have different softness and hardness. After he has completely carved it, he can get used to it.
It took half an hour to paint it from beginning to end.
Comparing it with the template, I found that there were five mistakes, the depth was inconsistent, and the other places were fine.
"There is one ingredient left."
Lin Yu took out the last piece of material and started to smelt it again.
"Huh, I'm skilled this time and I succeeded the first time." Lin Yu used pliers to take out the metal block from the smelting warehouse.
Repeat the shaping process again. After shaping, start carving.
If it fails, you have to buy another material.
He spent a total of more than 60 points and bought five materials.
Everyone has seen that Kawu manufacturing majors can make a lot of money, but who would have thought that the initial investment is also quite large.
If he didn't have the reward points, he wouldn't even be able to buy materials after starting a company.
You can only accept the mission first and exchange points.
This time, he relied on his previous experience to carefully control the button strength and energy output.
The circuit of energy is perfectly depicted.
"Is this it?"
Lin Yu released the button and looked at the shiny Kawu, which was engraved with beautiful horizontal and vertical stripes.
Feeling excited, I picked it up and looked at it carefully.
The energy loop is divided into three links: energy traction loop, energy circulation loop, and energy termination loop.
Card masters use their hands to use cards.
In fact, energy can flow from anywhere in the human body.
It's just that people are not used to using other places. Most of them use their hands. The most commonly used body tool is the hand.
Energy traction circuits serve this purpose.
It can draw the energy in you to come out from other places.
And through energy, you can feel every card on Kawu.
Different circulation circuits direct energy to different cards, and the cards are therefore activated.
Then a termination loop stops the flow of energy.
This template only comes with four card slots, and each card slot can only hold two cards, which means a total of eight cards.
Lin Yu took out his eight cards and inserted them into his belt card.
He silently felt that there was an extra place on his body where energy could be used, and that was his waist.
This was also the first time he used Kawu. After the energy was injected, the eight cards in his belt were all in his mind.
As long as you select an energy circuit, the corresponding card can be triggered.
"Try it first."
Lin Yu looked around and saw that it was already late at night, and only some people were still working on it.
He tried to activate [Shield Insect], and the energy circulated and entered the card slot where [Shield Insect] was stored. Then the card was activated and the energy ended.
"There is no problem!"
The corners of Lin Yu's mouth curled up, he was very excited, and the shield worm appeared in front of his eyes.
When no one was paying attention, he canceled the summons, and the shield bug turned into a card and returned to the card slot.
After the card is used and canceled, it will appear in the position before use.
"The effect...it has no effect."
Lin Yu shook his head helplessly. He had just realized that it only had the basic effect of using cards quickly.
But this is his first kavu, which has a different kind of commemorative significance.
"Oh, your kavu was successfully produced?"
Xu Ruoshui came from the side. He noticed the energy fluctuations and wanted to see if any student was using the card.
Then he saw the Kawu in Lin Yu's hand.
Judging from the lines of the energy circuit, this should be a successful work.
"Yeah, but it has no other effect." Lin Yu nodded, quite helplessly.
"This is normal. If E-level materials have multiple effects, who would create a high-end Kawu?"
Xu Ruoshui smiled and then said: "How many ingredients were used?"
"Five servings."
Lin Yu answered truthfully that he didn't know whether this level was good or bad.
I had been making kavu just now, and while I was waiting for the materials, I looked at the performance of others and didn't pay attention to how many materials they used.
"Not bad, so far it's above average. If you practice harder in the future, you will be successful."
Xu Ruoshui praised him and turned around to leave.
Only by practicing more and studying more can we stabilize our level and make further progress in the Kawu manufacturing profession.
There are no other shortcuts.
There are also people who are impatient and give up halfway. Such people are not suitable for Kawu majors and are more suitable for practical majors.
Lin Yu stretched himself and the mission was over.
Just wait for the next class and hand in this card.
He looked around but didn't find Xu Ao, and Bai Yusu was also missing.
"These two people can't finish it earlier than me."
Lin Yu secretly thought, of course, he didn't think he was a genius, it was normal for someone to be better than him.
The moon hung high in the night sky, and he worked on the kavu from afternoon to evening before he succeeded in making one.
After going to the school's late-night cafeteria for a meal, he returned to his dormitory.
Not long after returning, Xu Ao came to the door and said enthusiastically: "When I left, I saw that you were still making Kawu. Have you finished making it?"
"It's done, you're done too?"
Lin Yu's guess was correct. Xu Ao nodded and took out a pair of shoulder armor.
"Good guy, you suggested that everyone make belts, and you secretly made shoulder armors yourself."
Lin Yu laughed and cursed, but he also knew that the belt is indeed the choice for beginners.
"I have done kavu before. The belt suits you, but not me."
Xu Ao shook his head and said: "I plan to join Master Sun Hu in the future, so I have to show my abilities."
Lin Yu nodded. Xu Ao, an ordinary person, could make complex shoulder armor. He must have put in far more effort than ordinary people.
The energy he uses is his own, and he can control the inflow of energy like an arm.
Perhaps ordinary people like Ao Ao need to use other machines to make Kawu and draw energy circuits, which is a lot of inconvenience.
Lin Yu took out his belt, communicated with Xu Ao, and learned a lot of new knowledge.
The two then returned to their respective dormitories.