Chapter 123 Does fraud have anything to do with serious people (seeking a monthly ticket and
Chen Wenzhe dipped his hands in water and began to repair the rim and body of the vessel.
The edge of the mouth should be even and the body of the vessel should be even. If it can be thinner, make it as thin as possible.
Ancient craftsmen used 70% drawing and 30% trimming, while modern craftsmen generally use 30% drawing and 70% trimming.
And this all depends on the level of craftsmanship. Chen Wenzhe's craftsmanship is naturally very good, so he only needs to make a little modification.
After drawing the embryo, I looked at the shape of the device and then felt it with my hands. I found that the carcass was still a bit thick.
Of course, after drying, the embryo can also be thinned by sharpening in the later stage. However, if the drawing can be done well, why must it be trimmed by sharpening?
After calculating it this way, he was actually a specialist in the four techniques of drawing, printing, sharpening, and glazing.
As a result, making porcelain is a bit delayed.
I really don’t know if I don’t do it, and once I do it I feel like nothing works anymore.
In a cruel move, Chen Wenzhe once again spent one hundred achievement points to upgrade his embryo drawing skills.
Sure enough, the learning time was shorter this time.
While drawing embryos, you should familiarize yourself with the newly acquired inheritance in your mind, so that you can digest the inheritance faster.
Master-level embryo drawing technology, the resulting embryo has fewer places that need to be trimmed.
In addition, he did not need to print the blank this time, even if it was a sharp blank, because the blank was pulled well, it could be omitted.
In this way, with his master-level carving and painting skills, he can directly advance to the glazing process.
Professional level glazing is lagging behind again.
Just learn it. Anyway, you still have more than a hundred achievement points. If you don’t learn it, it will just be a number.
After another hundred achievement points, he quickly learned a lot of glazing techniques.
Ceramic glazing generally includes soaking glaze, spray glaze, brushing glaze, and pouring glaze.
When laymen look at glazing, it's as simple as dropping and lifting it. This is glaze soaking or glaze dipping.
However, it is not easy to do such a simple job well.
Master-level craftsmanship looks very simple, but it is actually difficult to do it.
Because they can achieve the state of great skill without craftsmanship, they can also be said to be the greatest simplicity.
If it falls, there will be no difference, and the glaze will not flow into the mouth of the porcelain.
By lifting it up and controlling the speed, you can control the thickness of the glaze. It can be said that every time you lift it, your skills are fully demonstrated!
This is real skill. After learning such a unique skill, Chen Wenzhe's craftsmanship in making porcelain has almost reached the master level.
It's a pity that he has no achievement points.
Otherwise, he could simply upgrade his printing and sharpening techniques to the master level. That way, he would not have any shortcomings in making porcelain.
Doing a process and relaxing for a while seems to be normal in this studio.
After the drawing is completed, the embryos are not trimmed, and the next step is to dry them. In this studio, it takes at least half a day to dry.
After drying, it is carving. After carving is completed, it is painted. Finally, it is glazed and fired in the kiln.
Step by step, now it needs to be dried. Chen Wenzhe has no chance to study, so he naturally has to do other work.
He took out the third of the chi-ear bottle and looked at the body of the bottle. There were blue and white clouds and dragon patterns on it. It was much more difficult to repair this piece of porcelain than to make one.
The remnant vessel in Chen Wenzhe's hands is still in good condition. It has not been broken into pieces. Now he needs to make a new bottle body and attach the mouth of the bottle to the kiln for firing.
First, trace the relationship between the remaining utensils and the objects on paper and stitch them together into a picture.
Dark spots and lines caused by foreign matter deposition in some areas require special cleaning.
You can use hydrogen peroxide or 84 disinfectant to clean the cracks and gaps on the main utensils first.
Reduce the color difference in the seams as much as possible so that there will be no traces on the mating surface after bonding.
Then use cotton swabs on the fragments, absorb hydrogen peroxide or "84 disinfectant" and apply it on the black spots to "fish" out the black matter. It usually takes half an hour.
If the black color is deep, replace the cotton strips several times and wash repeatedly until the black color is completely washed away.
It should be noted here that the joint surfaces of each fragment must be cleaned and wiped with hydrogen peroxide.
Before bonding, wait until the joint surfaces of the remaining pieces are dry before bonding.
To bond the remaining vessels, the bottle body must be made first.
The characteristics of the Chi-ear bottle are very obvious. Chen Wenzhe only needs to follow the shape of the Chi-ear bottle and the size of the mouth of the bottle to pull out a qualified vessel embryo. When the time comes, remove one-third of the upper mouth, and then glue the remaining vessel
Partially enough.
This kind of blue and white cloud-dragon-patterned chi-ear bottle has two chi-ears on the mouth of the bottle. It is more troublesome to make, but the bottle body is very easy to make.
In this way, he could pull out a bottle according to the design without connecting the tire, because he had to use the remaining piece of the bottle mouth for the upper part.
For porcelain such as the Chi'er bottle, even if it is not a remnant, it still needs to be bonded together. The neck and mouth of the upper part of the bottle, as well as the body of the bottle, are bonded together using the bonding technique.
Now there is no need to make the bottleneck part, it is very easy to do. It only took a short time for Chen Wenzhe to draw it into shape.
The next step is to refine it first, then dry it after the tire repair is completed, and then cut it as needed. Finally, the new and old porcelain are bonded to each other.
If you don't have enough confidence, the remaining piece of equipment can actually be repaired, such as cutting off the uneven parts, so that it will be easier to connect the tire.
But Chen Wenzhe is now a bold artist. He doesn't want to waste any leftovers, so he can only make trouble for himself.
By this time, his work was over again and he had to wait again.
Instead of wasting time waiting, it would be better to learn more, so Chen Wenzhe washed his hands and planned to use his mobile phone to find out something about Longquan kiln.
He raised his head and looked at his classmates in the studio. It was almost noon, and Professor Tao hadn't come yet?
Chen Wenzhe stretched and twisted his neck, and saw several people staring at him.
"What are you looking at?" Chen Wenzhe asked Chen Xingchen.
"Are you going to repair the broken weapon?"
"Is this a Qing Dynasty blue-and-white cloud-dragon-patterned chi-ear vase?"
"Looking at the blue and white hair color, it should be from the early Qing Dynasty, or the third generation of the Qing Dynasty?"
"It looks like it belongs to Qianlong!" Senior Brother Wang Jing, who seldom spoke, actually came over to join in the fun.
"The original balance is gone, but I have seen a pair of well-preserved bottles like this. The Jiaqing model should be from the early Jiaqing period. The craftsmen at that time were still from the Qianlong batch."
"That's right." Wang Jing nodded and then said, "Isn't it expensive?"
Through these few words, Chen Wenzhe confirmed that this senior brother who is usually not easy to talk to is really quite capable.
"One hundred thousand."
Although he felt a little guilty, he could only grit his teeth and say it was one hundred thousand.
"Hey, in today's world, counterfeiting technology has improved, and even the price of residual weapons has begun to skyrocket. This does not leave any way for serious people like us to survive!"
Chen Xingchen shook his head, as if he really had no way out.
However, does fraud have anything to do with serious people?