Under the cover of night, the hustle and bustle of the land is covered, allowing the people who make a living on this land to calm down.
However, there are always people who cannot calm down because they have more to shoulder.
Jinling, heavy machine tool factory.
meeting room.
The electric lights illuminated every corner, making the faces of the dozen or so people around them turn yellow.
Silent people and silent wind.
In September, the weather in Jinling is still muggy. Even at night, the wind from the south still carries the temperature.
In the room, everyone lowered their heads, as if the yellow light was dazzling.
In front of the conference room, three serious figures also bowed their heads in deep thought.
Three people, representing the factory director, deputy director and technical director of the machine tool.
"Okay, let's finalize the time for the eight of us and tell the following together."
The factory director said something to the deputy director beside him, and then the deputy director nodded and unfolded the documents at hand.
Deputy Director Cai didn't speak fluently, not even a little abruptly, and not a little willingly, but the people around him understood in their hearts.
Lao Zhu shrank his neck and then acted like a quail.
Facing them, the middle-aged factory director felt even more angry.
That time, if there was nothing wrong with the drawings, nothing could be said.
"But why don't you come?"
A machine tool factory that has always been at the forefront of domestic construction, a leading enterprise in the First Machinery Department, one of the Eight Golden Flowers, a heavy machine tool factory with countless honors, unexpectedly!
"If there is really nothing wrong with the drawings, it will make sense whether we have produced anything in such a short period of time."
"What kind of machine tools did we make in those years? But that thing, after so long, is still being made."
Even so, with those two low-precision machine tools, our factory has established its position in the country's heavy machine tool industry and also clarified its position in the First Machinery Department.
"After all, in those days, even tens of thousands of pounds of output per mu could be faked, so we had to be on guard against it."
"Lao Ning, you, Huang Jingmei!"
"In that case, he and you are all old masters, will they understand why?"
The meeting continued for another half an hour, and before a new round of tasks was set, the factory director dismissed the meeting.
Silent, both of them held the phone, but they knew what to say.
bang bang bang
But before they found out what the Red Star Steel Rolling Mill was, everyone started to pay more attention to it.
"Yes, factory directors are all proven revolutionary comrades. They will take the lead on this issue and violate the rules."
"Go ahead, you told me twice."
Just after we finished, we heard that the Hongxing Steel Rolling Mill had built a low-precision machine tool. We were still surprised when we heard it.
Having said that, the factory director became less angry and his breathing felt slow.
But it's not that kind of machine tool. A factory with a well-known name in Q4 City actually made it?
"Director, you have been a small factory for many years. What kind of tasks have you done? What kind of machine tools do you think you can do with your abilities?"
Director Sun didn't stutter a bit, but still expressed his opinion.
"You alone don't carry much weight, so it's best to join forces."
In that matter, there is either something wrong with the drawings, and whether it is the fault of the superiors or the deliberate actions of the steel rolling mill, it is fine for us to do that, but if it offends someone.
"Comrades!"
"Did you hear that? Did you hear that?"
The sweat beads under my forehead haven't rolled down yet, but I have time to wipe them away.
Everyone above them shrank their heads, then raised their heads and looked at the angry factory director.
Before this tinkering, it was even better.
Because so are we.
"Yes, factory director, you think the verification is still bad, and the other party will keep it in check if everything is in order!"
No one even thinks that it’s not just professionals who suffer from such stuck accuracy.
The table was knocked again, the sound louder.
I've really thought about that question.
Thinking of this, the middle-aged factory director in the middle of the conference room began to breathe heavily.
"What about you? You shamelessly come with the drawings, but what about you?"
The factory director suddenly looked more serious.
"Well, that guy is not a bad guy. Tell me, why are you calling so late? You still have a lot of headaches over there!"
"Has he never thought about it, then, will the drawings be okay?"
"Director Sun! He said, the eighth time, from beginning to end, we did it again. Why is it still done?"
The factory director took a deep breath and stood up suddenly!
As an important department of domestic machine tool manufacturing, it is also a machine tool factory with a long history.
"There's no such thing as Southwest, but he still wants you to go when he contacts you?"
After saying that, the phone was silent again.
Not even a machine tool can make it?
In line with the principle of saving materials where possible, everyone picked out the parts that had no problems and the parts with acceptable accuracy and made modifications.
"Yes, I made a mistake when I ruled out replicas!"
Those who were notified of the meeting tonight are all the elite backbones of the machine tool factory, old people in the factory, and staunch revolutionary comrades.
So before getting the drawings, everyone also started a discussion, compared the drawings, and felt that there was nothing in the design.
After hanging up the phone, Director Huang leaned under his chair.
"Lao Cai!"
"You, you think, then, there is nothing wrong with the drawing design."
The factory director heard that he was going up and yelled out.
"Then if there's nothing wrong with the drawings, it won't take long for you to make it!"
In a word, Factory Director Ning took a breath of cold air and thought less at the same time.
"What does he mean?"
"But now they've been made. You, you think so, there's nothing wrong with the drawings."
"You are too slow, but have you done it?"
"Not yet. There is no news from the other two machine tools that got the drawings with us."
"Then if there is nothing wrong with the drawings, will we know?"
In addition, there are only two of them outside our factory, and they were purchased from abroad, and not one of them is second-hand.
A steel rolling mill is doing business. He is engaged in machine tools?
bang bang bang
This is a low-precision machine tool, a Jingmei machine tool.
"There must be something wrong with the drawings, and you guys will figure it out!"
At least the level of drawing is much weaker than that of the factory technical department.
"Ask your subordinates to review the drawings!"
"Old Huang, what does he mean?"
This chapter is not over yet, please click on the next page to continue reading! The factory director just stared at the middle-aged man at the back right above, who was the leader of the task force established outside the factory.
So, everyone looked at the drawings and made them based on their experience in special production.
And the other one, if there is anything wrong with the drawing, then...
"The requirements of the drawings are clearly here, but what about them? They are self-righteous and go too far!"
Then he walked slowly back to the office, sat silently behind the desk for a while, and then picked up the phone.
"But why didn't you just do it? Who told you, why?"
But then, a very slow voice sounded again, "Old Ning, Old Xue, we must have made our own."
Lao Zhu raised his head to meet the factory director's gaze, knowing that raising his head or shrinking his head would be a slap in the face. When things got to that point, I could fool him by just talking.
Will be able to distinguish the difference between the two.
"The machines outside the workshop are the worst. People, you suspect the ones sitting here are also worse than people."
"They are so capable, how can they make machine tools?"
"Okay, it's so late and he's still outside the office, so he's fine!"
The middle-aged factory director raised his head and scanned the people below.
Director Sun wiped the sweat from under his eyelids, swallowed, and explained, "Director, you are indeed tolerant of doing it according to the requirements of the drawings!"
The factory director frowned after hearing this, and then sat back down.
At this moment, Lao Zhu felt helpless.
"You now believe that the machine tools made in the steel rolling mill are real."
The factory director saw me and saved some face for me. After all, he was following his old man. He turned around and directed his firepower at the technical director.
"The opponent Jingmei is retreating from Jingmei, retreat!"
He reached out to open the drawing and laid it out under the table.
After Deputy Director Cai explained the situation, he kept silent, and then the room was silent again.
"The first time, they said it was carelessness. They never thought that the other party's requirements for accuracy were so low! Okay. Even if no one makes any mistakes, the Great Wall can be built in one day!"
Yes, as a warrior who has fought for a long time, in that position, I have long understood that there is nothing that can only be revealed by seeing through it.
Deputy Factory Director Cai spoke helpfully from the side, "You think it is unnecessary to ask your superiors for verification!"
"Huh? Sun Tengfei, what you say must be unfounded and responsible!"
Lao Cai mustered up his energy, but his voice was high and deep.
At this time, I realized that it was accurate and immediately stopped it and informed the factory manager.
The middle-aged man on the right heard this and adjusted his glasses.
But at that time, it was okay to just look at it, and moreover, I had to speak out.
When the person opposite heard me say that, it was obvious that I was vague about my intentions.
But now...
"That's a notification from a superior!"
"Currently, Hong Mill No. 1 has not been put into production. Without that machine, Hongxing Steel Rolling Plant will not be able to produce eight types of machine tools at present, including Venus, Hong Chong and Hong Mill!"
Because the deviation from the drawing is too small, it is difficult to assemble it with a special machine tool.
It's a matter of business.
"Comrades!"
In front of our eyes, it is obvious that the manufacturing precision of seven is enough, why should we achieve precision seven?
Factory Director Huang hummed, and then asked, "Old Ning, how far have their machine tools come? Let me tell you first, you can still do it now. The call is just to spy on information, and there is no joke.
mean!"
Before hearing the news, no one even believed that the other party knew what a special machine tool was and what a low-level machine tool was.
"The content is very complicated. Hongxing Steel Rolling Mill has not yet produced a milling machine, Hong Mill No. 1!"
After a long time, Lao Ning asked about the key, and Factory Manager Huang mentally scolded the old fox, "As a sponsor, I have to say that."
His fingers tapped on the table, and there was a sudden sound in the silent conference room, which immediately attracted everyone's attention.
"Director, you have summed up your experience and lessons from the last two victories, so you are produced according to the requirements of the design drawings."
I wanted to look at the documents that were rolled into tubes one after another.
A moment ago, Lao Ning's voice came, "Okay, then it's okay to wait. In that case, it's understandable for us to ask a few questions."
At this time, everyone realized that their experience had harmed them.
"Lao Ning, you have a meeting today."
Therefore, there is no seventh round of targeted remedies.
"But they still do bad things!"
"Why is this? It's still a pair of parts. Why is there one missing part after assembly?"
I was not the one who took the lead in making machine tools that time.
"but…"
"The first time it was a symbol of attention, and then it was changed to a symbol of seven!"
"Old Huang, he must be responsible for what he said!"
When everyone saw this, they also said less. The specific situation was still decided by the factory director.
After all, we are the professionals in machine tools.
The voice on the other end of the phone was heard, and laughter immediately came, "Old Huang, it's okay to call him so late!"
At the same time, the atmosphere in the room also became subtle.
I am beautiful.
After saying that, there was silence on the other end of the phone.
"Director, please return and replace the parts that have no problem."
Is that a waste of energy and delaying progress?
"bad!"
If there is a problem with the drawing, we still make it right, but this is not a slap in the face!
The factory director glanced at everyone, and with that shout, the depression accumulated in his heart was vented, but the anger still lingered!
"What is he going to do?"
"Let's talk about other things first! I think you know Lao Xue in the front office department. We don't have one right now, and we are also organizing production internally."
In that kind of mentality and environment, I was just a worker, and even in the United States, I became slack, and I was not tolerant of the requirements in some places. So when I was halfway through, I found that it was actually possible to assemble it with the existing parts.
.
snap
The people above immediately started talking, and each of them looked at the drawings with trusting eyes.
"I think I am a fourth-level worker with sufficient experience, so I am taking other people's things for granted?"
So he said in a beautiful tone, "That's true, it's just that I was too slow to hear it!"
"Lao Zhu, let him tell you what happened."
There are some things that you need to listen to others say, but you have to say them yourself.
After a long time, a high-pitched voice came.
A moment ago, the phone was picked up.
"You admit it, if we don't do something right, we'll change it!"
