"With the approval of superior leaders, Comrade Chen Gong is appointed as deputy director of Hongxing Machinery Factory."
"Appoint Comrade Wang Guodong as deputy director of Hongxing Machinery Factory."
"Appoint Comrade Sun Guo as deputy director of Hongxing Machinery Factory."
The appointment of the three people will not attract too much attention.
Even Sun Guo's appointment seemed normal to everyone.
After all, Sun Guo is also the director of the first branch factory. If he can sit on it today, then he must be in trouble.
Coupled with the big explosion of Yang Xiaotao, everyone has become accustomed to the sound of these small firecrackers.
"Appoint Comrade Zhao Chuanjun as Director of the Security Division."
Finally, Liu Huaimin said, and everyone below looked at Zhao Chuanjun on the far left.
From this position, you can tell that the security level of the factory will be raised again in the future.
After Liu Huaimin finished speaking, he returned to his seat.
Then Yang Youning stood up and came to the podium. Seeing him rolling up his sleeves, everyone was immediately prepared to give a long speech.
Perhaps when everyone was preparing their ears and ready to receive chicken soup for the soul, Yang Youning went against the norm and announced the appointment directly.
"Comrade Gate, after discussion by the leadership of Hongxing Machinery Factory and approval by superior leaders, the first, second and third branches of the original Hongxing Steel Rolling Mill were merged into the first branch of Hongxing Machinery Factory, with Comrade Sun Guo as the director.
The deputy directors are Comrade Tian Hui and Comrade Li Hexian!"
He said, Sun Guo and everyone in the audience stood up, and everyone applauded.
Judging from the appointment, as before, the director of the branch factory serves as the deputy director of the main factory. The deputy director is at the same level as the workshop director.
"Comrades from the first branch will take on their own duties in the original steel rolling mill in the future, and will also be responsible for the production of heating stoves, agricultural machinery and other products..."
"The task is heavy, the personnel allocation must be implemented as soon as possible, and the three of you must do a good job in the ideological work of the comrades."
Yang Youning briefly explained the work direction of the next branch factory, and everyone knew that it was a small steel rolling mill.
No wonder they pulled people from various workshops, it turned out to be for this purpose.
"Other personnel arrangements and specific work will be decided by the leader of the newly established branch factory, and they can be implemented after approval!"
After talking about the first branch, Yang Youning continued, "Other departments of the original Hongxing Steel Rolling Mill, including the administrative department, publicity department, R&D department, transportation fleet, etc., will remain unchanged at all levels for the time being."
After saying that, many people below breathed a sigh of relief. It would be best if there were no changes, at least they wouldn't have to adapt to a new job.
There is also unwillingness to give in. If such a good thing does not take advantage of it, it will fail.
It's psychologically uncomfortable to watch other people rise to the top.
There are also those who are worried, like the director of the Logistics Department, who is sweating on his forehead right now.
He didn't think he would be promoted, otherwise he wouldn't be sitting down.
There is only one result, that is, it will change.
Whether things change for the better or for the worse depends on the leader's wishes.
Yang Youning ignored the change in the expression of the person below and continued, "The eighth, ninth, and tenth production workshops of the original steel rolling mill were merged into the first production workshop of the machinery factory, which mainly produces pressure cookers."
"The director of the first workshop is Comrade Huang Degong."
As soon as he finished speaking, Huang Degong, who was sitting below during the interview, suddenly turned red, and the eyes from around him came over with strong envy.
Huang Degong felt his body tremble a little, and there was a surge of excitement in his heart.
At that time, he gave up the directorship of the eighth workshop and went to work under Yang Xiaotao as the director of the tenth workshop. Although it was a smooth job, the tenth workshop was a mess at that time. In addition, the pressure cooker was not well-known, and many people were not optimistic about it.
Some of the people were puzzled, some were laughing, some were skeptical, and some were watching the show!
But now, those who watch the joke have become a joke, those who are suspicious have become jealous, and those who watch the show have become regrets!
And all of this was given to him by Yang Xiaotao.
That young man with a smile on his face always brings him confidence and surprise.
Looking towards the rostrum, Huang Degong and Yang Xiaotao's eyes collided. Seeing Yang Xiaotao's smile, Huang Degong stood up slowly and nodded seriously.
The responsibilities on my shoulders have increased, but I must not be embarrassed.
The applause around him gradually subsided, and Yang Youning nodded to Huang Degong. This man was also an old man from the steel rolling mill. He was also hard-working and a good person.
It's a welcome return.
"In the second year of the No. 1 and No. 4 workshops of the original steel rolling mill and the Machinery Plant, the workshop director was Chang Mingjie."
After Yang Youning finished speaking, the venue fell silent again. Everyone was stunned when they heard Chang Mingjie's name.
There are two production workshops here. At least we should find a former workshop director.
The former director was employed in the pressure cooker workshop, but why was there a new person in the second workshop?
It's not that Chang Mingjie's abilities are not good, but that he doesn't match up with him.
First, the two directors of the fourth workshop looked unhappy, but they did not show signs of attack at this time.
Even the person involved, Chang Mingjie, was in a daze. He never thought that he, an engineer, would be the workshop director?
There is no precedent for this. Yang Xiaotao’s example is already available, but it is also the only one!
He didn't dare to compare with Yang Xiaotao.
If you let him do design and make machines, he'll have no problem, but if you let him manage people, he won't be very good at it!
Just when everyone was confused, Yang Youning coughed lightly and said, "The main production task of the second workshop of the machinery factory is machine tool production. It is also the most important task in our machinery factory at the moment. All departments do not have to cooperate fully."
After speaking, his eyes rested on the two directors of the first and fourth workshops. They felt Yang Youning's gaze and their hearts tightened. Zai Ma understood and quickly clapped his hands to show support.
After Chang Mingjie heard this, at the urging of Chen Binpangguo, he stood up and thanked the people around him, while looking at Yang Xiaotao.
He knew that this matter must be Yang Xiaotao's decision.
Sitting back in his seat, Chen Bin next to him smiled and said, "Old Chang, you can't run away from this drink tonight!"
Chang Mingjie responded with a smile, "No problem. Call the leader when the time comes."
Pang Guo on the side shook his head, "Then you have to do it early, otherwise, you see."
As he said this, he looked forward and saw people congratulating Huang Degong.
This chapter is not finished yet, please click on the next page to continue reading the exciting content! Chang Mingjie nodded solemnly.
After Yang Youning finished speaking, he paused for a moment and then continued to speak.
"The second, fifth and seventh production workshops of the original steel rolling mill, and the third workshop, workshop director Zhan Lei."
Zhan Lei in the crowd let go of his palms and wiped the sweat from his palms on his pants. He felt relieved and stood up to thank the applause.
"The main work of the third workshop is the production of tractors. We will discuss the follow-up arrangements in detail!"
Zhan Lei nodded in understanding, and the two workshop directors beside him immediately came forward to congratulate him. Although the director was not them, the former director could do it too.
This is a tractor workshop, so it's easy to get results.
"The third, sixth and eleventh workshops of the original steel rolling mill were merged into the fourth production workshop, workshop director Wang Fa!"
Bang bang bang…
The sound of applause made people feel even more envious.
I think Wang Fa was just the team leader of the third workshop before. He was a lot more senior than him and had more experience than him.
But he insisted on taking this seat.
Looking at his promotion trajectory, it is not difficult to see the shadow of Yang Xiaotao in him.
Even among the people who followed Yang Xiaotao from Workshop No. 3, who is not a team leader or an elite backbone now?
He is the captain of the auto repair center, and he is also in the same group.
This is the hilltop of the steel rolling mill!
It's just that these people also have real abilities, and there's nothing anyone can do about it.
Qin Hui also has three friends.
Who doesn’t have a few friends?
I can only say that in life, meeting noble people is really important.
"In the fourth year, we mainly produce engines. This is also the top priority of the machinery factory. We must lead the factory and the team well!"
Yang Youning gave special instructions, and Wang Fa nodded and sat down.
With the completion of the workshop reorganization, Yang Youning also explained the arrangements for the personnel of the relevant departments. Among them, the logistics department is supervised by Chen Gong. The original logistics department is divided into five departments. The first four departments are connected to the first to fourth workshops respectively, and each workshop
The deputy director is responsible for supervision.
The fifth department is responsible for the daily logistics work of the machinery factory.
In this way, some of the workshop director's arrangement problems were solved.
The meeting finally ended, and it was still early, so everyone started communicating in the conference room.
Yang Xiaotao and Liu Huaimin discussed the machine allocation and personnel transfer issues in the workshop.
According to the requirements, it is best for the Sihe workshop to be close to each other, so some workshops will need personnel to change locations.
In addition, it is important to re-divide the machine.
Wang Guodong and Sun Guo were also discussing, especially since some machines were to be transported to the first branch factory. The original task situation also had to be explained. The handover work could not be completed immediately and needed to be carried out step by step.
While Yang Xiaotao and others were talking, Huang Degong walked up to him, and Yang Xiaotao saw him and came to the side.
"Leader!" Huang Degong smiled, now calling Yang Xiaotao leader is appropriate.
"We want to treat you to dinner!" Huang Degong said and looked at the others, meaning that we would treat you alone this time.
Please join us next time.
Yang Xiaotao knew that this was a consultation, and he happened to have something to remind them, so he nodded, "Okay, I'm free tonight!"
"That's great, just go to my house then!" Huang Degong left with a smile.
Yang Xiaotao thought about the semi-automatic milling machine, so he told Liu Huaimin and Yang Youning to leave.
Found Chang Mingjie who was surrounded by Liu Daming and others.
"Boss, you came just in time, we were just about to treat you to a drink!"
Chen Bin laughed loudly, making Chang Mingliang a little embarrassed.
He himself is not good at dealing with people and sophistication, so he is really unfamiliar with this treat matter.
Seeing Chang Mingjie's forced smile, Yang Xiaotao naturally calmed down his thoughts, so he opened his mouth to come to the rescue, "Lao Huang and the others are treating us tonight, let's get together another day!"
After hearing this, everyone said it was too late to start, and Chang Mingjie was also a little disappointed.
"But Chang Gong, come with me tonight! Let's talk about work!"
"Everyone is here, I just want to tell you something!"
Yang Xiaotao looked at everyone and saw that all the elites from the R&D department were there, so he said hello and everyone went to the office.
Everyone followed them to the office and sat down. Yang Xiaotao took out a drawing and handed it to Chang Mingjie, and then explained to everyone. "This is a semi-automatic milling machine that has just been designed. You can make it as soon as possible."
"Semi-automatic milling machine?" Chen Bin and others immediately jumped up and leaned forward to look at it. Their eyes widened in disbelief.
"It's a semi-automatic bed. I heard that only the Shanghai Machine Tool Factory has one in our country, but that was more than ten years ago. I don't know if it can be used now!"
Liu Daming sighed with emotion, and Zhou Hong on the side even changed his eyes and stared at the drawings, "It's all old calendars. I bought that one from Gaohu Chicken. It broke long ago and was eaten in the warehouse."
Hui, I have called many people over the years and invited many experts, but it just hasn’t been fixed.”
Zhou Hong looked at Yang Xiaotao seriously as he spoke, "Leader, we have been studying this in China for a long time. How did you make it?"
"How else could it be done? I must have made it myself!"
Liu Wenming affirmed that the R&D Department had not received any tasks these days, and Yang Xiaotao must have done it on his own "secretly".
In the eyes of people like them, this matter is very common. Only a newcomer like Zhou Hong who doesn't understand the situation would ask this question.
"Old Chang!"
"lead!"
"This semi-automatic milling machine is much more complicated than ordinary machine tools. You should study it first."
“And the purpose of research and development is to solve the production efficiency problem of diesel engines!”
"This is very important for engine production, you need to arrange it quickly."
Chang Mingjie nodded, "I know the leader, don't worry, we will make it as soon as possible."
After saying that, he took people to the R&D office, and everyone was immersed in studying the drawings. When Yang Xiaotao saw nothing, he followed him there and answered any questions he had.
Semi-automatic milling machines are, after all, a new thing, and several people debated and scratched their heads from time to time during the research, with questions one after another.
Yang Xiaotao answered patiently, and soon it was time for lunch. Everyone straightened out their thoughts and decided to go to the workshop to start work after dinner.
In this regard, Yang Xiaotao provided psychological support.