Chapter 137 The reason for the destruction of the black dragon
Li Ke still went to visit the lathe and planter that Walder wanted to build, but I have to say that the subjective kinetic energy of these dragon people is really admirable.
After getting Li Ke's drawings, they came up with a lot of things based on their own experience.
for example……
Standardized manufacturing.
This shocked Li Ke greatly.
It really shocked him.
"Sir Li Ke, because the parts, forging methods, and repair methods required in your design are different from current engineering technology, your tools require relatively high precision for mechanical parts, so we must first design
A standard parts manufacturing production line, so the speed is a bit slow, otherwise you would have seen more than a dozen harvesters now, but please rest assured, as long as we smelt another furnace of steel, we can manufacture it within ten days.
Come out of Fifty Taiwan."
Wald stood at the machine tools that were being guided and corrected by dragon people in various ways, and carefully introduced them to Li Ke.
Although they did not understand why Li Ke required such high precision on these simple machines, it did not prevent them from executing it and thinking of many things that Li Ke had not thought of.
"It's just that we are still very short of iron ore. The existing steel production can only maintain the current scale. Moreover, the high-precision mechanical products you manufacture are too dependent on engine oil and rubber rings. There are also
There are many bearings, so now we can only use manual and magic methods to create two directional machine tools..."
Li Ke's design was a shock to Walder. Only those who are truly engaged in architecture and machinery can understand how terrifying and grand this is.
Although Li Ke was as restrained as possible when drawing the design drawing and did not put any requirements for chips and circuit boards, he overlooked one point.
What he considers to be a "barren" environment is already unimaginable to the world of Azeroth.
When drawing the design drawings, he still subconsciously thought that he was in a world with nearly 350,000 manufacturing companies, 6.7 million factories, as well as countless small foundries, parts manufacturers, and even raw material production.
The kingdom of merchants.
The requirements for screws and various types of parts shocked Wald even more.
Because he is knowledgeable, he knows what kind of precision, strength, and special alloys are needed for some parts on Li Ke's design to operate. This is the knowledge of a dragon man who has lived in the dwarf world for hundreds of years.
affim.
Moreover, dragonmen themselves are very sensitive to things like metal, and can even manipulate metal to a certain extent. Among the entire dragon army, they are the best at using tools.
There is no doubt that he is an expert!
The kind of expert who should be consecrated!
As Wald continued to introduce the industrial system he saw based on Li Ke's design drawings, and then continuously modified various equipment, Li Ke was completely in a state of 'shocking my mother'.
Because he saw something very magical and technological.
Magic milling cutter.
That's right, the magic milling cutter.
The base material was just an ordinary one. It could be seen that it was a hand-forged milling cutter, but there was a faint red light attached to it. Then Li Ke saw that the hand-forged milling cutter easily cut out one piece after another.
The parts are then taken away by the dragon craftsmen on the side for quenching.
Li Ke even saw a pool filled with quenching oil.
But this pool of quenching oil is not entirely prepared for the milling cutters, but for the screws on one side.
Li Ke could see clearly that these dragon men used shining tools to easily pull out wires of different thicknesses, then placed them next to different machines, and then quickly cut and squeezed them, and even squeezed them.
When screwing nuts, do they use squeezing power or a hammer?
After that, the gums and dental plates, which are the devices that make the threads on the screws, also flashed with crimson light. They easily made a large number of threads on the semi-finished products, and then were taken by the dragons on the side and thrown into the quenching furnace.
During the quenching... Then Li Ke saw two dragon men returning to their original shapes, spitting out dragon flames from time to time.
Afterwards, these screws will be thrown into the quenching oil pool to cool down. After cooling, the water elements summoned one by one will be stuffed into their bodies for cleaning, and then thrown into the low-temperature quenching furnace aside for secondary quenching.
Make sure that the inner core of the screw is not too hard and may break during use.
A set of processes runs smoothly, removing those magic elements, and it is completely a low-end version of a modern screw production workshop.
Especially those hand-forged milling cutters, die plates, and equipment, Li Ke was dumbfounded when he saw them.
Li Ke even saw a group of dragons experimenting with a hydraulic press that he just drew a random design diagram of! And it was also a magic version!
They're trying to do it with water elements!
They set up a magic circle to summon the water element and a repatriation magic circle inside the machine, so as to control the strength of the hydraulic press by controlling the strength of the summoning magic circle and the strength of the repatriation magic circle! And judging from their conversation, they have almost solved it.
There’s a sealing problem!
Li Ke was shocked and speechless. He looked at each one one by one, and Wald also explained each one nervously. Although he had tried his best to follow the standardization and precision that Li Ke said, he made it.
But when he saw Li Ke's speechless look, he was still very uneasy.
Because he didn't know if his own decision would make Li Ke angry, but it was true that he did his best to follow the standardization and precision that Li Ke said.
Although Li Ke only mentioned this matter.
But looking at Li Ke's shocked and disbelieving face, he still lowered his head and rubbed his hands uneasily.
"I must have made Master Li Ke unhappy! That's right! That's it. How can I make an independent decision? Master Li Ke's plan is absolutely perfect. I'm just making unnecessary moves! That's right! That's it!"
Thinking of Li Ke's precise drawings and extremely demanding parameters, Walder became even more ashamed. He couldn't help but want to kneel down and beg Li Ke for forgiveness, and felt extremely ashamed of his lack of ability.
——If he were more capable, he wouldn't be able to disappoint his master.
However, when Li Ke saw the finished screws, which were almost identical, and the nut that fit perfectly on one side, he finally couldn't help but speak.
Because in just a moment, hundreds of standard screws and nuts appeared in front of him.
"Ward?"
Walder immediately knelt down on the ground, prostrate on the ground, and responded to Li Ke respectfully.
"Master, I'm here!"
"You...were you really spies before? And you were still a fringe, almost unimaginable figure?"
Walder became even more panicked, because what Li Ke said was true.
"Yes, yes, Master! We are just the humblest existence of the Black Dragon Legion!"
