Chapter 55. [Case 10] Strange things happen again and again
Hu Zongren interrupted Mr. Xia and said, "That wet figure? Is it a man or a woman? Your community is relatively old. Is it possible that it is a homeless person nearby?" Mr. Xia said with a wry smile, "It's a woman."
figure, but it would be great if they were homeless people. If so, do I still have to find you two? I feel very embarrassed and don’t understand why Hu Zongren suddenly asked such a stupid question. People must have found us because
Damn it, otherwise why would you invite me here to drink tea?
Mr. Xia went on to say that our worker was frightened at that time. He stepped aside and picked up the broom we usually used for cleaning, and then loudly asked the figure at the door who he was. The other person stood there motionless all the time.
Because it was too dark, I couldn't see clearly whether the front was facing the house or the back. After shouting several times and still getting no response, the worker became a little anxious and grabbed one of our printers on the table.
He threw the ink cartridge he had replaced at the figure, probably thinking that if it was a living person, he would just apologize. As a result, the ink cartridge passed directly through the figure and fell to the ground outside the door.
.
Mr. Xia said that it is strange to say that from the beginning when our worker saw this figure, he did not think that it was a living person, otherwise why would he be so scared. And when he saw the ink cartridge passing through the figure,
I was so frightened that I shrank into the corner of our factory. The strange thing was that the figure did not chase me in or anything, but kept standing. After a long time, the machine near the door of the factory suddenly started ringing again. It stands to reason.
The worker had just unplugged the power supply himself not long ago, and with the power outage now, there was no reason why the machine would suddenly start up on its own. When the machine's scanning light suddenly turned on, our worker could see clearly with the faint light.
A woman with short hair was standing facing the room. When the light swept across, she saw a pair of eyes without black eyes staring at him.
Mr. Xia said that he was so frightened that he knelt on the ground. He felt that he could not be beaten anyway, so he closed his eyes and kept chanting Amitabha with his hands clasped together. After a few minutes, he closed his eyes and noticed that the surrounding light seemed to be brightening.
When he had the courage to open his eyes, he realized that the power had been restored and the lights in the factory were on. He glanced around and found that the figure at the door was gone, but the printing press that had been unplugged was still there.
It's humming and warming up.
Mr. Xia continued to say that he was the only one on duty in the middle of the night, and there were no 24-hour patrols in our community. However, after what happened, he did not dare to stay in the factory anymore, so he called
I called him and asked him not to wait until I came before leaving, but he refused to say anything. He also said that he would rather not have this job than leave here immediately. He just called me to tell me.
In fact, I didn't even know what was going on at that time. So I persuaded him to close the door of the factory with hard words, and then ran to the intersection where there was light and people were waiting for me.
Guanyinqiao can be regarded as a city that never sleeps. No matter how late it is every night, there will always be people of various identities passing by in twos and threes, so staying on the roadside under the streetlights is a wise choice. Mr. Xia said that at the time, he felt that although he did not know
Why was this worker so excited when he made a phone call in the middle of the night? But because he was usually a friendly boss to his employees, he knew that he would never do this for no reason, so he immediately got out of bed and drove out.
Mr. Xia told us that he only listened to the worker narrating everything that had happened before under the street lamp. Although it all sounded a bit ridiculous, Mr. Xia himself was a student of the Book of Changes, so he still had some understanding of metaphysics.
He understood and knew how to respect. So he drove the worker home in a humane manner, then took the key back from the worker and told him to rest at home for a few days without deducting wages until the matter was cleared up.
Then he came back and drove back to the factory.
Mr. Xia said that there was no way. The customer's business orders were piling up. If he didn't continue to work overnight, the construction schedule would be delayed, so he took over from the previous worker and continued working. Hu Zongren asked Mr. Xia, if you want to check that strange machine
Is the machine powered on? It was powered on for no apparent reason before. Was the power plugged in when you looked? Mr. Xia said it was strange because the connector of the power supply is an open type, and there is a connector to ensure voltage stability.
ballast, so generally speaking it will be tight when plugged in and not easy to pull off. I have repeatedly explained during the safety training earlier that the power supply is either not connected or must be connected firmly. After all, this is the equipment.
Relationship, the price of a machine is close to one million, who can bear the responsibility for a short circuit? But when I checked the machine, I found that the power supply was the same as the previous worker described, only half of it was plugged in.
In this case, the machine generally has a poor contact and will automatically trigger the safety protection system of the machine itself. It will not be able to power on and the power connector will be insulated in the ballast to prevent leakage. However, the half-plugged in power supply is not only uninsulated, the machine
Ula Ula is working, as if he is printing something, but the paper tube is empty, but it is spinning. In other words, if there is paper on it, something may be printed, but no one knows the content.
It’s nothing more than what it will be.
Hu Zongren thought for a while and said, did you change the paper and check it? Mr. Xia said, that is not the case, because the paper is a very heavy roll, and it is a bit difficult for one person to put it on. In addition, he heard that
After hearing these things, he still felt a little guilty, so he cut off the power of the machine. Then he used another machine to complete the work of the previous worker, while facing the factory door, looking nervously at all times.
, just stayed up all night.
Hu Zongren asked him if anything else happened that night? Mr. Xia said that there was nothing more. However, due to his nervousness, the rain stopped at that time, so he could clearly hear any small movement outside.
During the visit, there was the sound of a wild cat chasing a mouse, but it was always a false alarm. The next day, in order not to affect the work of my colleagues, I kept this matter hidden and no one said it, but then it happened
Some things forced him to pay attention to them, and they caused a lot of bad influence among the workers. Rumors spread, and some brave people came to him for confirmation, which made him wonder what to do.
Hu Zongren asked Mr. Xia what happened later. Mr. Xia said that during the day, he forgot to tell the workers that the printing press with the problem should not be moved for the time being, so someone who did not know about it opened the machine.
And put paper on it and started printing. He said that these printed materials were albums used by a construction unit in Chongqing to submit proposals to the Municipal Planning Department. As an official, you know that the requirements for printed matter are also quite tricky. I thought it would go smoothly.
However, when the workers were binding the printed matter, they found that almost every one of the albums had a strange shape on the cover. So they opened the source file to check, but no problem was found at all.
Mr. Xia said that a worker came to report the situation at that time. It stands to reason that if the machine itself has a color registration problem, then every page printed by this machine will have the same mark, but this time it was strange.
It was only on the cover. Hu Zongren asked him what shape it was, and he said it was a triangle that looked like rounded corners. There was a small dot not far from the flattest side of the triangle. Originally, this question could be answered directly with the naked eye.
It was difficult to find out during inspection. When they were wrapping the cover, they couldn't stick the film on anything within the pattern range. So they had no choice but to change the machine and reprint the cover, which was delayed.
It took a whole day, and now they haven’t even settled the balance with me.
What Mr.
The meaning of the expression, to put it simply, is that something that should not have appeared on the cover appeared during lamination, and he suspected that this was related to the machine being inexplicably connected to the power supply the night before, and it meant that the strange figure appeared and
This machine may be related in some sense, and I want us to verify it.
Mr. Xia continued to say that it was not just that, because only one worker witnessed it that time, but since there was no witness, it could only be a one-sided statement. However, on the third day after that day, another worker on the night shift
, while operating the punching machine, his hand was injured. Mr. Xia said that it was inevitable that the operator would be injured due to cutting or operating errors in the printing factory, but that night
After I received a call from the worker saying that he was injured, I immediately asked him to go to the hospital for a check-up. When I went to the hospital to visit the worker the next day, I learned another strange thing, that is, the worker was drilling holes.
When printing the machine, he obviously fixed the printed matter in the sized template, then pushed it into the machine, and then turned on the power. This was for safety reasons, but the machine, which was obviously powered off, fixed the board just after he pushed it in.
When it was good, it started suddenly and drilled through the worker's hand from the back of his hand to the palm of his hand.
I touched my hand and it hurt just thinking about it. Mr. Xia said that the injured worker told me that when he put the board in place, he was about to take his hand out, but something seemed to grab him.
He couldn't break free. He could clearly see each of his fingers, but he couldn't move, and his clothes were not caught by anything. The worker also told Mr. Xia that he remembered the feeling very clearly at that time.
It seemed as if someone reached out and grabbed his wrist, preventing him from moving. He said there must be a hand, but he couldn't see it.