Qin Hai was preoccupied with new energy vehicles. After staying in the capital for a few days, he hurriedly returned to Anhe to lay out plans. Both Ning Zhongying and Song Hongxuan were very optimistic about the idea of new energy vehicles and strongly supported him in this direction.
Investment. As for the Anhe School of Materials, there is nothing to say. The research on lithium batteries and supercapacitors has already been established. At this time, it is even more intensive. It requires people to give people and money to give money. The progress can be said to be changing with each passing day.
After Zhang Daiwei held a meeting in the capital, he returned to Beidian and encountered a series of retaliation. Wang Kaihua did not spend too much energy on such a small person, but there was never a shortage of scoundrels around the leader. These people
After realizing the leader's intention, they began to cause trouble for Zhang Daiwei from all aspects. However, what surprised them was that Zhang Daiwei had no intention of surrendering at all, and directly threw down a resignation letter, including files and organizational relations.
Without asking for anything like that, he drifted away, leaving everyone with a sense of loss as if they were punched in the air.
A few years ago, there were various ways to deal with an unknown employee in a state-owned unit. The most critical one was to withhold the employee's file and household registration, so that the other party would have nowhere to run and could only stay.
I accept all kinds of difficulties in the workplace. But the situation has been very different in the past two years. With the rise of the private economy, more and more employers do not need your household registration or files at all, as long as they are talented people.
, they just introduced it directly. Things like food and oil relations are of no use at all now. As for files, they can create a new one for you. The trick of using personnel relations to block people is really useless.
Of course, if Beidian Group insists on getting along with Zhang Daiwei, there are still some ways. After all, it is a large enterprise at the deputy ministerial level, and the boss also holds deputy provincial level positions in the province. However, just because he is in a
After saying a few inappropriate words at the meeting, they used organizational channels to pursue him thousands of miles away. The leaders of Beidian Group were too embarrassed to do such a thing. They could only watch Zhang Daiwei change jobs and go to Hongyuan Province, becoming a newly established company.
Technical director of Hongyuan Automobile Company.
Qin Ling's environmentally-themed commercial was finally aired on CTV's prime time slot. In the corner of the advertising screen, there were the words "Daqin Group", indicating that the commercial was sponsored by Daqin Group. However, most of them
The audience had no feelings for the Daqin Group. They were just moved by the environmental protection complex of the female singer Jade. For a time, countless environmental protection groups composed of Qin Ling fans popped up all over China, causing a lot of environmental protection pressure on local governments. Qin
Ling also became a nationally renowned "environmental protection ambassador" as Qin Hai expected.
Amidst all the fuss, few people have noticed that Quwu Ceramics Company in Linxi Province has successfully launched a series of ceramic metal cutting tools and quickly spread them to the global market, which is a challenge to Kucera, a traditional monopoly in this field.
The company created strong pressure.
"Is this the kind of ceramic knife that Wang Peichao told us about?"
In the conference room of Kusela Company, Chairman Kiyonomi Nishikawa looked at Quwu Company's new product promotional video played on the big screen, and asked Technical Director Takehiko Komura with a bit of jealousy and a bit of resentment.
A few years ago, Kucera Company, which was going all out to develop household ceramic knives, was about to succeed. Suddenly, it was heard that a little-known small ceramic company in China had completed the development of this product first, and Kucera Company was
It has captured most of the long-coveted global market. From that time on, Nishikawa Kiyonobu has been eyeing this Quwu Ceramics Company and regards it as his strong rival.
In recent years, Kusela Company has gradually regained its market share in household ceramic knives by relying on its strong economic and technical strength. However, due to the existence of Quwu Ceramics Company in this market, profit levels have been severely suppressed. Changes
It has become a useless piece of equipment. Kucera’s initial investment in ceramic knives has not yet been fully recouped, and the project has been completely destroyed.
After losing the market for household ceramic knives, Nishikawa Kiyonobu set his sights on industrial knives, especially metal cutting tools. He knew that this was a bigger market than household ceramic knives.
Metal cutting is the most common operation in machining. Turning, milling, planing, grinding, and drilling all require the use of cutting tools. To be able to cut hard metals, the hardness of the cutting tool must be higher than the metal being cut. This is
There is no doubt about it. The problem is that with the development of human technology, the hardness of various alloys is getting higher and higher, which also puts forward higher requirements for the hardness of cutting tools. Traditional alloy cutting tools are difficult to use on workpieces that are almost the same as their own materials.
The most important thing is that both the workpiece and the tool will heat up seriously during the cutting process, and the biggest flaw of metal is that it easily softens once it heats up, which has also become the weakness of alloy tools.
The idea of using ceramic materials to make knives has been around for a long time. The Mohs hardness of ceramic materials such as zirconium dioxide can reach more than 9.0, exceeding the hardness of chromium, the hardest metal among metals. In addition, the high temperature resistance of ceramic materials is far less
It is much stronger than metal materials. At a high temperature of 2000 degrees Celsius, ordinary alloy steel has become as soft as dough even if it has not melted. However, ceramic materials can still maintain a very high hardness, which is ideal for high-speed cutting.
very important.
The difficulty in making ceramic materials into cutting tools lies in the bonding of ceramic powder. If the bonding is not good, the ceramic material will be very brittle and cannot be used for cutting. Qin Hai was able to develop it earlier than Kucera.
It is because he developed a unique adhesive for household ceramic knives. Kucera Company subsequently developed a similar adhesive, and was able to regain part of the market from Quwu Ceramics Company.
The strength requirements of metal cutting tools are much higher than those of household knives. After all, the former is used to cut metal, while the latter is only used to cut vegetables. To achieve higher strength, it must have a different adhesive from household ceramic knives.
Glue, in this technology, Quwu Ceramics Company and Kusela Company are in fierce competition.
According to Takehiko Takamura's prediction, Kusela Company could develop a special viscose with industrial application value earlier than Qu Tao, thereby producing ceramic turning tools first. But who would have thought that Qu Tao, with the assistance of the Anhe Institute of Materials
, actually launched a series of ceramic knives before Kucera, and spread it to the global market almost overnight.
Kucera Company purchased Qutao's ceramic cutting tools from the market immediately and tested them in the laboratory. The test results showed that Qutao's ceramic cutting tools have high hardness, high strength, high temperature resistance, etc.
A series of advantages almost completely meet Kucera's positioning requirements for its own products. In other words, even if Kucera completes its own research and development, it is just picking up some leftovers behind Qu Tao.
After all, Kusela Company is an old company with a high brand awareness and wider channels than Qu Tao. If it can keep up with Qu Tao's technology in time, it will not be difficult to maintain half of the country. However, Takehiko Komura knows that in his laboratory
It will take some time for the research and development work to be finally successful. With Qutao's products already on the market, every day of delay means that more customers will flow to Qutao. This loss is Kusela's.
Unbearable.
"According to Wang Peichao, Qu Tao has been developing ceramic cutting tools, but the progress has not been obvious. Especially some time ago, the dispute between Chaosai Company and Qu Tao also had some impact on Qu Tao's operations.
, we analyze that the time for Qu Tao to complete the development of cutting tools will be pushed back for a while. Who would have thought..." Takehiko Takamura lowered his head and could not go on. Their products have already been taken out, so what analysis is needed at this time?
, what else is it used for?
"Takamura-kun, when will our product be finalized?" Nishikawa Kiyonori asked with a solemn face.
"I think...probably...if nothing happens...I mean...it should be about 2 years." Takehiko Takamura stammered in reply.
"Takamura-kun, don't you think it's too late?" Nishikawa Kiyonori said angrily.
"Yes, it's too late." Takehiko Takamura replied.
According to the conventional technology research and development cycle, it is not too slow to complete the development of ceramic cutting tools after 2 years. Material development is different from the development of mechanical products and electronic products. The latter can prove success or failure as long as they are built, while material technology needs to be carried out.
Conclusions can only be obtained through repeated testing. For example, fatigue experiments on materials require the materials to undergo hundreds or even thousands of hours of processing and then test their performance. Only then can the fatigue resistance of a material be determined. If this is omitted
Experiment, who knows whether the material will cause problems in practical applications?
But Takamura Takehiko couldn't say these words to Saikawa Kiyonori. Saikawa Kiyonori is also in this field, and of course he also knows the particularity of material research. Saikawa Kiyonobu asked this question because Kusela Company simply cannot accept two years of work.
Delay. In two years, the market will completely forget Kucera.
"Takamura-kun, do you have any way to solve technical problems quickly?" Kiyonomiru Saikawa began to press Takehiko Takamura.
Takehiko Takamura hesitated for a moment and said nonchalantly: "The technology in the laboratory is still very immature. If it is put into production rashly, it may cause unpredictable quality problems and damage our company's reputation. The only solution for now is to learn from it.
The technology of Quwu Ceramics Company, after all, their technology has been tested and can basically be trusted."
"Can we learn from it?" Nishikawa Kiyonan drawled, "This is completely fine. We must be good at learning our opponent's techniques, so that we can be invincible." (To be continued, please search Piaotian Literature,
The novel is better and updated faster!
ps: In two days, I calculated an input-output account and various balancing relationships, which confused Chengzi...