Chapter 119: The Metal Separation Is Mine, No One Can Take It
In the Magic Building Society, Master Lewis and I were looking at each other. Behind Master Louis, four mentors stood side by side, looking at us dumbfounded.
"Hand it over." Instructor Lewis stretched out his paw, no, it was his hand.
"Dream, these things are mine." I hugged the things in my arms tightly.
"These things don't belong to you, they belong to the school." Instructor Louis' hand moved a little closer to me. "You are only qualified to use them."
"This is obtained through my craftsmanship and wisdom!" I took a few steps back holding the things in my arms. "Besides, didn't you all say you don't want these things?"
"Who knows if you separated so much mithril on purpose or not!" Teacher Lewis looked at me with dangerous eyes.
"Hmph, it's obvious that you are incompetent and can't separate them." I raised my head. "Now that I have made so much mithril, I came here to rob it with all my heart. Teacher Lewis, are you still shameless?"
The matrix of the magic array ordered by the college was completely produced and spliced a few days ago.
It is impossible to form a magic circle with a radius of about 32 meters in one piece, at least I can't.
In order to make this magic circle matrix, I chose the same production method as Diff's magic circle matrix.
The modules of the magic array are pre-made and then spliced together.
Because after the magic array matrix is spliced, it does not need to be rotated and adjusted like the output speed switch of the magic machine, so as long as it can be produced to a finished product of ordinary quality or above, it can be used.
If such a large magic circle matrix requires a perfect quality finished product, I probably won't have to do anything this year.
The metal material used in the matrix is not entirely made of mithril as I proposed, but is an alloy doped with part of mithril.
Hum, if the metal magic array matrix with a radius of 32 meters and a thickness of 1 centimeter were all made of mithril, Felice Academy would probably not be able to pay for it if it were sold.
However, once mithril is doped with other metals, its magical ability will drop significantly. Although the alloy doped with mithril has better magical ability than ordinary materials, it will become extremely difficult to process the other side.
After the fusion and molding, the mithril alloy has undergone unknown changes. It is extremely strong and it is basically impossible to process it again.
Well, to burn the grooves of the magic array, the scrapped knives every day weigh more than the mithril consumed.
Therefore, the metal residue carved from the prefabricated mithril alloy by carving the magic circle is usually thrown away as waste.
Such expensive mithril alloy is actually treated as scrap by you, what a waste!
After making the mithril alloy prefabricated plates and carving them every day, I would carefully sweep the carved metal fragments together and put them away.
After all the mithril alloy metal plates are completed, I will start to deal with these treasures that are waste to others.
What, I don’t care about the magic circle?
Please, making a magic circle is considered a basic course for magicians.
The reason why they couldn't make this magic circle was because the magic circle was too big, and if there was even the slightest mistake, the whole thing would be scrapped.
Even with the help of skills and making them in pieces, I also scrapped a lot of mithril alloy prefabricated boards.
Of course, I didn’t throw away the broken mithril alloy plates, I collected them all and kept them for recycling.
As long as the base of the magic circle and the engraving of the magic circle's patterns are completed, the rest of the academy can be completed by itself.
The separation of these mithril alloy materials is easy to say.
As long as the temperature is controlled well and the temperature is raised little by little, the alloys fused together by different metals will melt in batches and separate due to their different melting points.
It is difficult to say, because the melting point and boiling point of Mithril, a strange material, are relatively close, and the melting points of several other materials in the alloy are almost the same as Mithril, so the temperature control requirements are quite high.
Although the principle is simple, it is relatively difficult for this world with backward technology and flourishing magic.
It is very simple to let the fire magicians of this world come over and melt this alloy. Basically, any fire magician of level 5 or above can do it.
But it would be too difficult for fire magicians to accurately control the temperature.
Fire magic is rough and unrestrained. And asking a fire magician to control the temperature is like using a warhammer to make sewing needles.
Well, the warhammers in this world are not flat, they are basically prismatic. You can imagine how difficult this is.
Of course, this does not mean that there are no fire magicians who can skillfully control temperature, but such magic is too rare and difficult to find.
If there were such a fire magician in the academy, when the cable car brackets were being made outside, would the temperature be too high and all the steel in the mold vaporize, and would he be scolded in the end?
Hum hum, although these magicians can't do it, can I not do it?
Although I don't know fire magic, I can make magic equipment.
The magical iron melting furnace that separates these mithril alloys was redesigned and made by me.
Although the internal structure is the same as the previous Magic Iron Melting Furnace, this one is larger and more complex.
In addition to ventilation and cooling equipment, a set of magic input valve switches that can be finely adjusted are added.
This valve switch is derived from the recent crazy use of magic transformation skills to upgrade. As the switch is rotated left and right, it can slightly increase and reduce the amount of magic input, thereby changing the flame temperature of the fire magic transformation array in the magic array, thereby achieving precise
Ability to control temperature.
The ventilation equipment is also prepared to control the temperature. As long as the temperature is too high, turning on the switch will let in cold air, thereby lowering the temperature inside the furnace.
If the temperature is too high and mithril vaporizes, who should I cry to?
After the new temperature-controlled iron melting furnace was completed, the separation of mithril alloy began immediately.
Put the mithril alloy that has been ground into powder (it may be okay to throw the carved mithril alloy fragments directly in, but if you throw the broken mithril alloy prefabricated board directly in, hum.) into the furnace, turn all switches to the minimum
After that, turn on the main switch of the magic circle.
As the temperature gradually rises, the temperature in the furnace becomes higher and higher, and the metal powder in the melting chamber gradually begins to melt, and the metal liquid and metal powder are separated.
The molten metal liquid will automatically flow into the diversion trough, then flow out and enter the mold I placed next to the furnace.
After the metal liquid has completely drained out, replace the lower mold and continue to slowly increase the temperature.
Repeat the above process when the metal powder begins to melt and produce liquid again. Finally, all the metal materials are separated, leaving some slag.
Although the amount of mithril doped in the mithril alloy is not large, the amount cannot be large.
The metal fragments carved from more than 3,000 square meters of magic array, plus the broken mithril metal prefabricated plates, resulted in hundreds of kilograms of separated mithril.
The value of mithril is several times higher than that of gold. Hundreds of kilograms of mithril are piled together...
The impartial Tutor Lewis's eyes immediately turned red when he saw this piece of mithril ingot, which led to the previous scene.
