As the machine continued to operate, more and more metal armor plate blanks were spit out from the machine's discharge port. I picked them up and put them aside.
To put it bluntly, this machine is actually very simple. It is a small, powerful punch enhanced by magic technology.
Powered by the magic power output from the magic core, and combined with the gravity space magic that is instantly activated when smashing down to increase the momentum, this small punch press is no less powerful than an ordinary large punch press.
After hitting the mold that I made in advance, as long as the metal alloy raw materials that have been smelted in advance are put in, the punch can continuously produce metal armor plate mats of average quality.
Not only does it save labor, but it also greatly increases production efficiency.
However, the quality of the equipment produced with the punch machine was judged by the system to be average at best, and could not reach the quality of the set of samples I sent to the military.
But this is normal, the precision of machinery will never be as good as that of manual processing.
But the armor pieces made by machinery are better than the ones with stable quality. If a bunch of equipment of varying quality is made, although there is no problem in meeting the requirements of the Slandi Ministry, I will be unhappy!
As for how to improve the attributes of this set of equipment so that it can reach the quality of the sample armor I handed over to the military department, I have already thought of a solution.
That is to use this machine to produce blanks.
After entering the mold that I specially adjusted, the machine produced not the finished product but the raw material, which gave me room for re-processing.
After a few days of frantic punching and casting, I produced a hundred sets of heavy cavalry suit blanks, which almost filled an entire room.
Then, the next step is to turn these blanks into finished products and improve their quality.
In fact, it is very easy to improve their quality.
Don't forget, my "Blacksmith" skill had already reached level 1 when I left the dwarves.
As the blacksmith's skill level increases, even when making equipment of ordinary quality, the skill will give the equipment a fixed attribute bonus.
And one time, when I was making equipment for Uncle Orlick, I discovered that even if it was made by Uncle Orlick, the skills of the equipment that were about to be completed would still give it attribute bonuses.
And now, I just want to use the fixed attribute bonus given by the system skills when the equipment is finally finished to improve the quality of this equipment.
Well, the only difficulty at present is to ensure that the quality of the equipment produced at the end is also ordinary.
Otherwise, there will still be a small amount of difference in the equipment produced.
After spending a few more days to finally process these one hundred sets of equipment, the armor parts in the room turned into sets of equipment, which I piled in the room, filling the entire space again.
Next, it’s time to start enchanting.
In fact, since I learned enchantment in the elves, I will enchant less important equipment when I have free time and conditions, in order to match the "enchantment" skill level.
Although "enchanting" is more troublesome, I have managed to reach level 9 in the past few days and can barely use it. The equipment will not be damaged due to the high failure rate.
Although higher-level enchantments are not unusable, I decided to use low-level enchantments to enchant and strengthen these one hundred sets of equipment.
After all, these equipment are sold for money.
The Slan Empire probably won't care about a small amount of damage. After all, my waste of materials when making equipment is quite low. I can also separate and recycle some of the broken materials and cut off scraps.
However, once a high-level enchantment fails, the damage to the equipment will be very high.
Once a high-level enchantment fails, either defense or protection will be lost, or both.
Even if good luck only reduces durability, the lost durability can directly turn top-quality equipment into inferior products.
So for the sake of safety and efficiency, I decided to just use low-level "solid" enchantments.
solid
Enchantment level:c
Increase defense by 1-4
This enchantment is the reason why the elves' clothing consumption is very slow. Using this enchantment attribute to enchant the equipment will not only increase the defense, but also become extremely durable.
Moreover, there is basically nothing special about this enchantment. It is low in difficulty and has a single attribute. It is very suitable for practicing, and basically the elves can do it.
And now it is very suitable for me to use it in large quantities. After all, even if it fails, it will only lose a little durability. Even if it fails three or four times, it still meets the acquisition requirements of the Slan Empire's military department.
As for the enchantment with a 90% success rate, if it fails more than five times on the same piece of equipment...
Although it is indeed possible in terms of probability, I should not be unlucky enough to fail to release multiple times in a row.
There is no pressure at all when losing five or six sets of equipment.
To permanently enchant, you must first equip an enchantment scroll.
Judging from the fact that it takes about fourteen times to enchant a set of equipment, and to enchant a hundred sets of equipment, I will probably live a life without seeing the sun for more than ten days.
Take your time.
First, there is the magic scroll for making enchantments.
Take out the parchment paper that has been prepared and soak it in the mixed magic potion. After the potion is completely soaked, hang it outside to dry and use magic power to rinse away the impurities inside, and then you can use it.
Well, the magic scroll for enchantment was actually prepared a few days ago.
Since there wasn't enough room inside the house, I put them all outside to dry.
There were a lot of misunderstandings because of this, and a kind-hearted aunt actually came over to talk to me about raising children.
I went there and found that what I was drying was parchment soaked in magic potion, not diapers!
Who prepares thousands of diapers for a baby’s birth?
Of course, even though I was angry, I still helplessly watched these processed magic scrolls being slowly dried.
The materials for making magic scrolls are very expensive. If someone takes them away...
I'm afraid I won't be able to resist doing thermobaric bombs.
After the matrix of the magic scroll is prepared, the enchantment attributes can be carved on it.
Well, basically you just use magic potion dipped in special magic powder and write magic inscriptions on the prepared magic scroll.
Compare the hand dexterity and drawing skills of the postgraduate entrance examination makers.
But with my “craft” skills and “sketch” skills, I feel no pressure at all.
After writing the inscriptions and magic circles required for enchantment, I casually signed my name on the side, which was used as an advertisement and anti-counterfeiting label.
After the production was completed, I pressed my fingers on the enchantment scroll that was not yet dry and began to slowly input magic power.
With the input of magic power, the magic potion on the magic scroll slowly dries, and the magic powder inside begins to melt, forming a semi-solidified inscription and magic circle on the enchanted magic scroll, and slowly exudes
Magic light.
After checking the system information and confirming that there was no problem, I pressed the prepared magic scroll on the heavy cavalry metal armor that had been put aside, and then continued to infuse magic power.
Although I also want to complete the enchanting magic scroll at once and then enchant it uniformly, the validity period of the enchanting scroll is very short. Once the semi-solidified magic circle and inscriptions on it are solidified, this enchanting scroll will be used for enchanting.
Even if it is scrapped.
After there was no magic reaction on the enchantment scroll in my hand, I took it off.
I saw that where the enchanting scroll had just been attached to the heavy cavalry metal armor, there was a magic circle and inscriptions that appeared and disappeared like magic scrolls.
Of course, my signature is also printed in an inconspicuous position on it.
Well, a good start, let's keep going.
Looking at the enchanting information that had appeared on the armor system panel, I nodded and continued to make the next chapter of enchanting scrolls for enchanting.
In the next ten days or so, I basically didn't go anywhere except eating, and I stayed here to enchant.
When you are tired, just lie down and rest aside. If you run out of magic power, take a quick magic recovery potion.
For a small amount of money and for the space magic core, I decided to fight.
So two days before the Royal Auction of the Slan Empire began. (To be continued.)
