The completion of the first phase of the project will enable the industrial version of the base to reach level 1.5, achieve partial electrification, and have basic levels of major heavy industry categories.
The second phase of the project will enable the industrial version of the base area to break through an important threshold, fully enter the era of electrification, reach the level of Industrial Version 2.0, and have a complete heavy industry system at a medium level.
Note that this is a complete heavy industry system, not a complete industrial system. There is a huge difference between the two.
As for the realization time, Yu Hua estimates that the first phase of the project will reach the highest level within three years, and the second phase of the project will take more than five to seven years.
After all, the factors of war and the lack of own strength are there. To develop industry, the first thing is technology, the second is technicians with a base of 10,000, and the third is workers with a base of 100,000.
Can the base area afford it?
cannot.
Yu Hua, who stayed at the Lantian Village Division Headquarters, spent a lot of energy and effort, using the thinking computer to conduct deductions again and again, and finally perfected the internal layout of the entire Yulin Steel Plant based on the prototype of the steel plant discussed by Professor Tongzhuang.
After completing this matter, Yu Hua turned his attention to the entire Sanchawan area, touched his chin, and thought about whether to make long-term plans for the Yulin Industrial Zone based on the steel plant as the core.
There is no doubt that the entire Yulin has the potential to become an industrial base.
With Shenmu on the left, Jingbian on the right, and Yimeng in the north, Yulin has unique advantages in developing heavy industry.
If Sancha Bay is taken as the core, heavy industries including steel plants and thermal power stations are arranged on the right side, and the area of 15 square kilometers on the left side is planned for machinery manufacturing and military industry. In this way, the entire Yulin will form an area including steel metallurgy.
It is a heavy industry chain base for power supply and machinery manufacturing, producing various industrial raw materials to continuously supply military production.
In the future, based on Sancha Bay, we can expand to the north to establish the Yike Zhaomeng Industrial Base, and combine it with various surrounding industries to form an unprecedented Yuyi Industrial Base in China.
This is an industrial base in the true sense and an important link towards a complete industrial system.
With the Yuyi Industrial Base, we can start the industrialization process in advance and plan an epic myth-complete industrial system unique to China.
"From the perspective of long-term planning, if the Yuyi Industrial Base can be formed, it means that the organization no longer has to rely on the Northeast Industrial Base to plan development as it did in the past, but can accumulate strength early... However, it is too difficult to reach this level.
, it was not accomplished by myself alone.”
Yu Hua was full of thoughts. After careful consideration, he had to give up the idea temporarily and shook his head gently: "Besides, my current knowledge base and academic level are not enough to support such a huge plan. I will put aside the long-term plan for the time being."
, let’s talk to the professor first and then talk.”
After saying this, I temporarily put aside the idea of building a Yuyi Industrial Base based on Sancha Bay.
He stood up holding a stack of design drawings and walked out of the house.
The design drawings of Yulin Iron and Steel Plant have been completed, and the next thing to do is to start this vigorous construction work.
As for the design drawing organization review and expert group evaluation, etc., I'm sorry, they haven't appeared in this era.
As the creator of the blank drawing paper of Sancha Bay and the developer of oxygen top-blown converter technology, Yu Hua has the final say.
As the design drawings of the Yulin Iron and Steel Plant were freshly released and handed over to the Engineering Department and the First Red Division, Yang Wu, the commander of the engineering team, gave an order to mobilize 1,200 soldiers from the Shenmu Highway Project, carrying tools and equipment.
The division headquarters gathered, took inventory of personnel and supplies, and then headed for Sancha Bay.
Regarding the materials and equipment required for the oxygen top-blown converter project, transportation began as early as after the original meeting. Over the past few days, most of the materials and equipment have been delivered to Sancha Bay.
"Boom!" In the center of Sancha Bay, accompanied by a dull and powerful impact, a soldier wearing a gray-blue military uniform hit the wooden pile hard with a hammer. Then, the entire wooden pile seemed to be like
A section of it was sunk into the ground like a nail.
This is the first wooden pile of Yulin Iron and Steel Plant.
"Dong dong dong!"
Immediately afterwards, the 1,200 soldiers of the Red 1st Division who gathered here took the hammers in their hands and drove the wooden piles into the ground one after another.
The scene was extremely hot, with the sound of hammers coming and going, playing a rapid and exciting piling symphony.
Hammer after hammer, wooden piles were driven into the ground, stone rollers were repeatedly rolled to level the site, formwork was laid, and various building materials such as cement, adobe bricks and the latest fired cement were continuously transported by horse-drawn carriages and ox-carts.
The steel plant project starts with the test furnace and blast furnace. The core parts are built first, and then the supporting facilities are gradually improved. This is exactly the same as the construction method of the Yancheng sulfuric acid plant.
As the designer, Yu Hua stayed at the Sanchawan construction site to provide technical guidance to the 1st Red Division construction team to get the steel plant construction on track as soon as possible.
Although every warrior has the blood of the noble infrastructure madman flowing in his body, due to the lack of technical guidance and knowledge, they in this era still do not know how to use the power of blood.
It just so happens that Yu Hua, who has mastered countless advanced knowledge, is the mentor who helps everyone awaken the power of the bloodline of the infrastructure madman.
Forward, 1st Red Division.
Onward, infrastructure nerds.
…
Liushugou, Machinery Manufacturing Factory.
The newly established machinery manufacturing plant compiled by the Works Section Factory Catalog is located next to the arsenal and consists of a newly built adobe building. The first phase of the project covers an area of about three acres and is divided into six workshops, covering turning, milling, boring,
Drilling, grinding, planing, and Schuler one-ton air hammers are divided into electric furnace steel plants.
In the turning workshop, a large high-precision lathe lies quietly in the middle, with a net weight of two and a half tons. It uses a three-claw chuck with a maximum rotation diameter of 600 mm and can process workpieces up to 3 meters long. The bed is brand new and smooth, with silver-white balls.
The bright screw rod is eye-catching, and the bed is filled with a faint smell of lubricating oil, revealing the unique temperament of advanced manufacturing.
Zhuang Qianding and five workers carried out various inspections around the lathe. Lin Wan stood beside him, serving as the inspection data recorder, responsible for recording each inspection data.
As a being with noble German blood flowing through its body, GROB lathe is undoubtedly the top noble in the lathe forest. The small lathes cobbled together in the arsenal are like pearls of rice in front of this GROB lathe.
So bleak.
From receiving the first batch of German-made mechanical processing equipment to the present, Zhuang Qianding carefully assembled it according to the engineering installation step diagram and instructions, and then debugged it many times according to the instructions. After several days of hard work, he finally completed this high-precision machine.
The machining accuracy of everyone is adjusted to the best state.
Currently, Zhuang Qianding is undergoing the purchaser’s ‘final acceptance’ process stipulated in the instructions.
The final acceptance is the last debugging and acceptance of machine tool equipment after it is delivered to the purchaser before formal production. The main content is to process test pieces, check whether the main components of the machine tool meet the requirements, whether the machine tool parameters meet the requirements, and whether the machine tool geometric accuracy and position accuracy are qualified.
, whether the movements of the machine tool are correct.
Passing the final inspection means that this GROB lathe can officially start production.
Time passed, and after more than ten minutes, with the last inspection confirmed to be correct, Lin Wan recorded all the inspection data, and the final inspection came.
In the turning workshop, five old lathes from the Guantian Arsenal held their breath and stared at the GROB high-precision lathe in the middle. This was a lathe they had never seen before, both in terms of weight and machining accuracy.
and processing dimensions, all of which wildly stimulated the nerves of the five veteran lathes.
Also, during the third inspection and debugging yesterday, they saw with their own eyes that Zhuang Qianding used this German GROB lathe to turn the test piece into a smooth and clear surface like a mirror.
Mirror turning!
To the five old lathes, this professional term was like a frog in a well suddenly rising to heaven and seeing the whole world. The shock in their hearts was almost unbearable.
Oh my God, do you want to make the workpiece look like a mirror? Do you want it to be so exaggerated?