typeface
large
in
Small
Turn off the lights
Previous bookshelf directory Bookmark Next

Chapter 25 The mass production engraving machine is completed and the first shot is fired!

The preparations for Longteng Company are still in progress. Su Chen has given full power to the intermediary. The intermediary will just finish everything. Su Chen has no plans to continue to intervene in the company's purge.

The company was under preparation, and Su Chen and the others began to study the mass production engraving machine. The mass production engraving machine had been taken out by Su Chen from Millennium Technology before. Of course, it was just technology. The technical drawings were available, but the assembly

It is quite troublesome to start up. After all, this is not as simple as assembly. There are also many tedious steps, such as starting up. It can be said that it is quite complicated and quite difficult.

It was a huge challenge for Su Chen and the entire team. Of course, Academician Zhou and others also came to help, and even Mr. Hai and Mr. Wu also came to help.

There is a small team composed of three academicians, Academician Zhou, Academician Li, and Academician Wang, and a large team with Mr. Hai and Mr. Wu as the core, a total of ten people, working together to complete the assembly of this quantum engraving machine. As for the other students,

They actually had students working under them, but this matter involved too many things, so they had no choice but to go there on their own.

When producing quantum engraving machines, Su Chen bought a new warehouse. This warehouse is the so-called Laboratory No. 2. Laboratory No. 2 means that it is about quantum chips, in this field.

Laboratory, and the Energy Technology Laboratory is in the previous laboratory.

In every new field, Su Chen would choose to change the laboratory. The original laboratory was not abandoned, but temporarily sealed. As for the machines and other things inside, he had already prepared them in advance.

It was taken back to the warehouse in order not to leak any information inside.

At this time, in the new laboratory, Su Chen and the others were making intensive preparations and starting new research.

Dongshi, Western Suburbs.

A warehouse in the suburbs has been transformed into a laboratory.

Su Chen was holding the design drawings at this time and began to study. He was responsible for the main part of the mass-produced engraving machine, which is the core part. The core part is the most critical and complicated system. Can this system be able to

When it was running, it was mainly about the core part, and Su Chen didn't worry about others coming, so he had to do it himself. At this time, he was debugging the first set of data on the machine.

"Academician Su, I have successfully tested the first set of data in Area A, and are currently experimenting with the second set of data. I believe that all five sets of original data will be completed within one day. I have already performed calculations before, and it should not be too big.

The problem can be continued!"

Academician Zhou is operating a supercomputer at this time. Now, Su Chen has five supercomputers in his hand, and every five supercomputers have two interfaces pulled out, which can be used by ten people.

Because his team, the most original staff, only has five people. Five people are enough. He doesn't need any more. Their team of five people is almost enough.

At this time, Academician Zhou's words immediately attracted Su Chen's attention. Suddenly, Su Chen began to check the first set of data, the first set of data in Area A.

The entire mass-produced engraving machine is divided into ten sections in total, with a total of five areas, divided into five areas and ten sections, namely the upper half of area a and the lower half of area a. The two parts cannot be

If you do it together, you must do it separately.

This is done not only to ensure accuracy, but also to ensure the rest of the personnel. Otherwise, if they keep spinning, the intensity will still be too high for them.

"Okay, Academician Zhou, you can continue with the second set of tests. It is estimated that it will take three days to complete the first half of the test. You will have to work hard these days!"

“We really don’t have enough manpower now, so I’m sorry, otherwise, even if we hurry up and slow down, we may not be able to get out!”

Su Chen said with a smile. He immediately started inputting the first set of data, and then began to make adjustments. At the same time, he began to form the central core part. The first set of data was related to many places, and he could use it at this time.

When Academician Zhou heard this, he just smiled and said nothing more. If he could finally contribute to the Dragon Kingdom, it wouldn't matter if he worked harder.

Having said that, when he saw the real machine, he was completely amazed. He did not expect that this mass-produced engraving machine would have such great knowledge.

It is obviously only half the size of a room, but it is so precise. It can be said that if this engraving machine can be successful, whether it is eventually used to produce quantum engraving machines or not, it will subvert the entire industry.

"Comrade Xiao Su, in the upper half of Area B, the second set of data has been successfully calculated. The two sets of data have been verified ten times at the same time. The error values ​​are all within the allowable range. They have been transmitted to you. Ten sets of data require

In a little time, it is estimated that within five days, the results should be completely available, and the grouping has already begun.

Assembling, two sets of data are used as one assembly point. This will be safer and can ensure performance. At the same time, I looked at the design drawing. Although it is said to be three sets of data, three sets of data are very dangerous, so I personally modified it.

Let’s put the two sets of data into one group sequence. See if you need to modify it!”

At the same time, Hai Lao also started to report. He was responsible for the upper half of Area B. Generally speaking, Hai Lao and Wu Lao were responsible for the entire work of Area B. After all, the work of Area B was the most complicated among them all.

It is also where high precision is most needed.

Hai Lao and Wu Lao have become twin geniuses, so it is best to be in charge of the entire area B. At the same time, they have the richest experience in the field. It is best to entrust them with such high-precision work. High-level

Precision requires high logic and adaptability. Hai Lao and Wu Lao are such examples.

Because they know a lot and have studied for so many years, they understand a lot, and they have countless experimental results, so there are almost no problems.

Moreover, the workload in area B is relatively small, which is more suitable for two people. If they cooperate in this way, it will be just right.

Hai Lao's words immediately attracted Su Chen's attention. There was a smile on his face. Sure enough, there was no big problem with his decision. Area A was given to Academician Zhou and Academician Li because they were both good at it.

For data flow, he had done a survey before, so in terms of data flow, area a is the best. Although area a only has five sets of data, the amount of data is quite large, quite troublesome, and the amount of engineering is also very large.

Big, Academician Zhou and the others can handle it just right.

And if there is a supercomputer, the data in area a is exactly right.

After finishing it by himself, Xia Zining can continue to start the calculation, so the two of them still cooperate with each other, two people, directly in two areas.

"Zi Ning, how is the unified calculation of data? Are there any results yet? There are only two minutes. After two minutes, the first assembly of area D will begin. After five minutes, the second unified calculation will begin. As soon as possible, don't

Out of time!"

Su Chen also gave the order at this time. After all, the D area and the core area are two areas that complement each other. These two areas have very high requirements and also require tacit understanding. The two people have cooperated for so many years, so naturally they use

When this came up, the two of them also cooperated. Xia Zining was typing on the keyboard crazily and doing calculations frantically.

As if her brain was completely integrated with a supercomputer, she was performing calculations crazily. At the same time, she also began to perform calculations. This was the first time that she had performed such high-precision and intense calculations. After all, at times like this, no one would be able to perform calculations.

She needs her. She has many assistants, but things are different now. Now that she is cooperating with Su Chen, she needs to maintain the highest vigilance.

"Okay, it's assembled. You can do the calculations over there. At the same time, I'm also doing the next set of calculations. It can be completed in five minutes, not seven minutes!"

After Xia Zining completed the calculation, it only took one minute to complete it, one minute faster than expected. Her hands almost flew on the keyboard and she entered a completely serious state. Chinese website

At this time, there is still a certain amount of time before the handover, but all the personnel have expired. As for the E group, it is Su Mumu and Luo Ning. They are responsible for a very difficult task, but they still completed it easily and brilliantly. Su Mumu also did the same.

Started to enter the state.

Although she is only a graduate student, she is still very strong in a real competition, so at this time she is also starting to

Started crazy calculations.

All the components have begun to be assembled and have entered the second stage. This is only the first day, and there is still a long time to go.

Academician Li, Academician Wang, Mr. Wu, and Luo Ning have already begun to sit down. Watching them working, they can't help but have many emotions emerging on their faces.

"I have to say that if this is really produced, the technology of Dragon Kingdom will probably be on a higher level. I am afraid that after Dragon Kingdom, there will be a qualitative leap forward, but I don't know how this mass-produced engraving machine will.

Will the effect be as Comrade Xiao Su said?"

Mr. Wu looked at the machine being assembled at this time. It was only half of the time. He couldn't help but sigh. This mass-produced engraving machine was stranger than they imagined, and it also looked very strange. However, it was not

It does not affect the performance of its capabilities.

I just didn't know how terrifying the power would be in the end. Several other academicians also nodded, and they all became curious.

"But if it's Academician Su Chen, I'm afraid it's really possible. And I looked at the design, and it's really like it was arranged by God. I don't think ordinary people can make this kind of design. It's too exaggerated.

Wow, it’s simply an exaggeration. How can we design an engraving machine that is interconnected and simple?

It is like a nine-link chain. Even if the design is released, no one can understand it. I believe that within ten years, no one will be able to crack this design, and each unit is completely unrelated, but together

When we were together, we started to connect again, it was so amazing, it was a bit shocking."

Academician Wang also sighed at this time. It was so amazing, so amazing. It felt like a maze, a maze that could never be exited. Some people wanted to get in, but they just couldn't get out.

Moreover, the drawings they received were only their own, and there were other structures, but it was very difficult to understand them.

After all, to them, this kind of drawing is just one word, which is much more troublesome than doing experiments. It can even be said to be like completely creating a new species. For them, this is simply killing them.

Uncomfortable.

Fortunately, they don't need to design or do anything. They only need to assemble and help as much as possible with the assembly. And it is precisely because of this that it leads to a problem, that is, as long as the assembly is completed

After that, that's it. If there are other problems, they have no way to deal with them. They just need to rely on Su Chen.

Finally, after half a month, everyone finally worked together to complete what they needed to do, and directly completed the mass production engraving machine. When the mass production engraving machine appeared in front of everyone, everyone was stunned.

It feels incredible.

After all, it took half a month to build such a machine, and it was actually made by his own hands. It was simply incredible.

"Okay, we have finally completed the mass production engraving machine. We have worked hard for everyone in the past half month. I also know that it seems inappropriate for me, a junior, to say these thanks to the elders, but I still say, thank you for your hard work.

Everyone, if it weren’t for your help, maybe it would still take a certain amount of time for the mass production of the engraving machine to be completed. In the past few days, everyone has been working really hard, almost all working overtime, and we have obviously agreed that everyone should rest and work together.

, but you secretly got involved, hahaha!"

Su Chen looked at everyone, bowed and said with a smile, it is really not easy to complete the mass production engraving machine.


This chapter has been completed!
Previous Bookshelf directory Bookmark Next