Chu Jungui’s original answer was mass production, but Kaitian’s idea was also very interesting, especially for this primitive race that still worships in front of totem poles. Pretending to be gods and ghosts may also be miraculous. It doesn’t matter if you use some light and shadow effects to disguise miracles.
It is very simple for Kaitian or Chu Jungui. Even though Kaitian is thin now, it is still no problem to build a ten-meter-high laser projection.
But after thinking about it carefully, Chu Jungui gave up this somewhat tempting idea. The reason is also very simple. The other party is not only a primitive religion, but also a true god. The monster that appeared in the illusion is completely worthy of a
The standard of the true God of the indigenous tribes.
So Chu Jungui implemented the original plan and started working according to Kaitian. He first picked up two high-strength alloy ingots, heated them with his bare hands, cut them into small pieces of different sizes, and then threw them to Kaitian.
A complete set of design drawings from the past.
The cut alloy blocks were placed vertically, and Kaitian turned into mist, covering them all in one breath. Then he saw that in the mist, the alloy blocks began to slowly change shape, gradually transforming into a specific form. Chu
What Jun Gui gave Kaitian was a tool kit including various cutting tools and drill bits. If you want to mass-produce, you must first have the tools.
This high-hardness alloy contains a large amount of titanium, and it is very difficult for Kaitian to gnaw on it. It takes half an hour to gnaw on a drill bit as thick as a pencil lead. Fortunately, Kaitian can process the entire set of tools at the same time. One piece only takes 3 minutes at the fastest.
minutes, with the slowest taking 51 minutes.
While Kaitian was struggling with a complete set of tools, Chu Jungui began the second step of preparation before mass production: energy. Energy includes both machines and energy for biological maintenance.
Chu Jun returned to the small highland, ran to a small tree as thick as the mouth of a bowl, chopped it down with an ax, and then chopped down two small trees nearby, and carried them back to the camp together.
Cutting wood was originally Kaitian's strength, but now that Kaitian was dealing with tools, Chu Jungui took matters into his own hands and used a hacksaw to cut the logs into sections of half-meter-long firewood. Chu Jungui's strength far exceeded that of ordinary humans, and Steel
The saw feed speed is comparable to that of a chainsaw, and it only takes one minute to process three pieces of wood.
Chu Jungui filled some firewood into the thermal energy stove and started generating electricity. Then he lit up a bonfire, set up a bucket full of water, and started to boil water. While boiling water, Chu Jungui picked leaves. He took action to generate electricity.
It was almost impossible to see the shadows of the hands, and even with a combat skill level of 24, it was easy to pick leaves. It only took 3 minutes to separate the branches and leaves of three trees.
He crushed the leaves and threw them into the big pot. Then he crushed up the wild vegetables, dried fruits and animal meat found in the ape monster village, threw them into the pot, and boiled them over high fire. The pot was 60 centimeters in diameter and one foot high.
Rice, after this big pot of food is cooked, it must contain hundreds of thousands of calories.
The meal was already being cooked, and Chu Jungui went to chop down three more trees. This time he deliberately picked out a tree with excellent toughness. After returning to the camp, Chu Jungui dropped his ax like flying, and a square piece of wood took shape in the blink of an eye.
, then he picked up the hacksaw, cut it horizontally and vertically, and divided the wood into four parts. Then Chu Jungui picked up a wooden bar, and the temperature in his hands rose rapidly. The wood softened under the high temperature of several hundred degrees, and was bent by Chu Jungui.
Form a perfect semicircle. The rest of the wood is processed in the same way. Basically, Chu Jungui rolls his hands and bends them to form a semicircle. Put the four semicircles together, add spokes, and then insert a wooden shaft cut into a cylindrical shape in the middle.
A square plate was placed on top, and a cart was born.
Chu Jungui looked at the time and saw that it only took 15 minutes in total. Facts have proved that if the manual speed is fast enough, it can achieve mass production results.
Chu Jungui picked up the cart and ran towards several large trees gathered together this time. These large trees were half a meter thick and more than ten meters high, and they were very lush.
Chu Jungui put down the cart and picked up the hacksaw. The sharp sound of sawing wood suddenly sounded in the night. After 30 seconds, the first tree fell suddenly. Then the next tree also fell down in 30 seconds, and the next tree again in 30 seconds.
.By the time 6 trees were cut down, the hacksaw was already glowing dark red and was about to melt.
"The steel quality is not good enough..." Chu Jungui shook his head, picked up a tree and held it under his arm, picked up the ax, and cut away at the crown of the tree.
The light of the ax flashed under the night sky, and a piece of the tree body flew out together with the branches and branches above, leaving behind a cut surface as smooth as a mirror.
After 4 axes, the front end of the log will become square. Use another ax to pinch the tip, and a piece of wood will be ready.
Just like this, one, two, three, four, one piece of wood; two, two, three, four, another piece of wood. It only took 4 minutes to finish processing all 6 logs. Chu Jungui threw all 6 logs onto the cart and pushed the cart.
Return to the camp. These logs are heavy or light. They add up to 5 tons. Chu Jungui cannot carry them back in one go, so he scores twice.
By the time he returned the wood, Kaitian had already processed most of the tools, leaving only the two most complex drill bits still being manufactured.
Chu Jungui cut out more than a dozen wooden poles of different thicknesses and attached handles to some of the tool bits. The thinnest one was only as thick as a hair.
The next step was the highlight. Chu Jungui took out a dozen different crystals and hundreds of metal blanks of different sizes, put a metal plate on wood as a workbench, and started processing the parts.
He twisted a metal grain the size of a sesame seed, heated it to 900 degrees with his bare hands, then knocked it flat with a hammer, then picked up a drill bit as thin as a hair and drilled a hole in the middle, then picked up the sharpener and saw
Chu Jungui's hand trembled imperceptibly, and he instantly cut out a neat tooth shape around the disc, then added a drop of water, smoke rose, and a gear with a diameter of 1.5 mm was completed. Chu Jungui visually inspected the processing.
The accuracy is roughly 0.002 mm, which is acceptable.
Chu Jungui put the gear aside and started processing the next part. When Kaitian finally finished processing the last tool, Chu Jungui also processed the last and 179th part. These parts were the size of rice grains.
The micromotor also has components with a diameter of only 0.4 mm, and two perfectly cut high-energy beam crystals.
Chu Jungui took a breath, held his breath, and moved his hands quickly and steadily to assemble the parts together. Then under Kaitian's gaze, a high-energy light speed generator including three material nozzles and two different frequencies was created.
, the spray gun with the functions of feeding, shaping and curing appeared.
This is the core component of the basic manufacturing machine in the alien survival kit that is commonly equipped in interstellar travel.
With the spray gun, other parts would be much easier to handle. Chu Jungui had already prepared all the raw materials, and in just a few minutes, a fully handmade standard manufacturing machine appeared on the workbench.
In this way, in the first hour after selecting the camp, Chu Jungui built a cart, bought several tons of wood, cooked a pot of dark food, and harvested a set of hand tools that could process complex machine parts.
Made a manufacturing machine.
Having the first manufacturing machine is like planting the first seed in the vast land. From then on, everything is possible. For example, now, the first thing Chu Jungui plans to do with it is to make another one.