typeface
large
in
Small
Turn off the lights
Previous bookshelf directory Bookmark Next

Chapter 130 Materials with Names

 When the chip designs a device, several basic recipes or design drawings will be given at the same time. The number of design drawings is determined by the initial data.

Before building the editor, Chu Jungui had already expected what kind of basic design drawings he could get. The first two design drawings were within the scope of his expectations: better than the ordinary version of the product, but to a limited extent. Want

More and better design drawings require scientists.

But the third design drawing made Chu Jungui completely change his mind.

This is also a new material, and the chip even gave it a name, "survival" composite material. This material is 80% composed of organic matter, with 10% inorganic matter and 10% metal. The internal structure of the material is very complex.

, if you look carefully under the microscope, you will find that there are many holes of different sizes, seemingly randomly arranged. However, the data analysis and comparison ability of the test body is far beyond human comparison. You can see its microstructure and purple grass at a glance.

The grass stems are very similar.

The support wall inside the material is mostly made of organic fibers, and the metal components are evenly distributed in the form of particles. No matter where this material is cut, it will form a surface with evenly distributed organic matter and metal particles.

Because it is hollow inside, its density is only one-eighth that of ordinary steel, which is similar to pure water, but its hardness, ductility and other indicators far exceed steel. In terms of the defensive power that Chu Jungui values ​​​​most, it

It is already equivalent to the defense level of the main battle tanks currently in service during the Tang Dynasty.

In other words, the 'survival' composite material provides the same level of defense with one-tenth the weight of armor alloy. Its emergence has made all the armor plate design drawings in Chu Jungui's hands obsolete. If not

Its production speed is so slow that the test subjects are eager to build houses with it.

The only disadvantage of this composite material is that it is not resistant to low temperatures, but this does not seem to be a problem on Planet 4. The temperature here is 60 to 70 degrees during the day, and it is always above 30 degrees at night.

To produce 'survival' composite materials, a large amount of comfrey and double-leaf tree leaves are needed. These raw materials are almost endless on Planet 4, which is not a problem. It's just that this time the editing is close to the cellular level, so the production process is very

Slowly, only one cubic meter of material can be produced per hour.

Chu Jungui roughly calculated that only 10 centimeters of 'survival' grade composite material is needed to provide a defense equivalent to 1000mm of homogeneous steel. This level of defense can completely resist the projectiles of the Spinyback Beast, regardless of whether it is a base building.

The materials or the shell of the chariot can meet the needs for the time being. Even if the Thornback beast evolves again in the future, all Chu Jungui needs to do is to lay another layer of armor on it.

Therefore, a large editor can produce more than 200 pieces of standard armor plates or other structural parts of equal weight every day.

The emergence of 'survival' composite materials was completely unexpected. It has gone far beyond the scope of basic design drawings, and ordinary advanced design drawings cannot reach this level. Normally, Chu Jungui would establish a specialized

Put a dozen scientists in a materials laboratory and wait ten or eight years before we can achieve similar results.

This is not a fluke. There may be a little bit of luck in science, but it will not be the decisive factor. There must be an internal reason for the appearance of this design diagram that should not have appeared. The only explanation is this special

The chip itself.

Chu Jungui's agent chip was originally very special. It was a gift from Dr. Zero. But before that, he had always regarded it as an ordinary level four agent chip until he discovered a loophole that could be cracked. As the degree of cracking increased,

, there are more and more special features of the chip.

The abnormal increase in computing power is one of them, and the independent increase in style design is also one. The emergence of survival materials made Chu Jungui fully aware of the difference of this chip.

It seemed that Agent Chip also understood that he was being targeted by Chu Jungui. At this time, he was unusually quiet and dormant, not even reminding Chu Jungui that he should assign new tasks.

However, pretending to be deaf and dumb is of no use here at Chu Jungui. Chu Jungui had not yet thought of what tasks to give it, but now that he has the design drawings of survival-grade materials, he can no longer waste his talents. So Chu Jungui

Jun Gui directly threw the fourth-level agent's workbench to Chip and asked him to design an alien version of the workbench accordingly.

Chip silently accepted the task and was given 110 hours of research time.

"Sure enough, there is a problem." Chu Jungui sneered in his heart. According to the test subject's calculations, it would take at least 2,000 to 3,000 hours to perform this task with Lin Xi's level 5 agent chip, and it may not be successful. And the standard level 4 agent

Based on 3 times the performance of the chip, it will take 600-800 hours anyway, and there is a small probability of failure.

This chip directly gave 110 hours of research time, and did not mention the probability of failure at all. It has almost jumped out of the category of level 3 chips. The test subject has an intuition. Although this guy has always liked to underestimate the research time in the past, this time it should be

The research time was intentionally increased.

However, the research time estimate can be falsified, but the research process will not be affected by this. It will take as long as it takes to complete, and there will be corresponding prompts after completion. This cannot be changed. Most chips have additional appearance design.

It will take some more time, but not much more, a few hours is the longest.

Chu Jungui didn't believe that this chip research workbench could also design a supporting base specifically for this workbench.

As for what the workbench itself looks like, whether it is magical realism, alien bionics, modern minimalism, or even in the shape of an Iron Throne or a lotus platform, it doesn't matter to Chu Jungui, just use whatever chips you want, as long as it can be used.

After assigning the task to the chip, Chu Jungui assigned a long-term task to the large editor to continuously manufacture 'survival' grade composite materials. At the same time, he summoned the soldiers who had just assembled the editor together and asked them to continue

To make a large-scale alien version of the editor, build 50 units first.

In addition to 'survival' grade composite materials, heavy metals and biological paints are also very useful. Heavy alloys can completely replace biological materials and are used to manufacture gun barrels, barrels, bodies and other components. Base 2 finally saw the opportunity to get rid of biological materials.

The dawn of quality weapons.

In addition, heavy alloy is also the basis of building structural components and can also be used to manufacture a series of equipment and components. With it, basically all equipment and machinery can be upgraded. And bio-coatings can greatly extend the service life of equipment.

Heavy alloys are used for better results.

Chu Jungui sent all three material design drawings to Lin Xi and asked her to re-plan based on the current materials. A complete upgrade of Base 2 is about to begin.


This chapter has been completed!
Previous Bookshelf directory Bookmark Next