After a simple exchange, Zhang Yu began to inspect the machines in the workshop.
Except for a few fixed desktop punch machines with a height of more than 3 meters, the yellow-green paint is still intact, while the others have long been mottled.
In front of each piece of equipment, there is a worker in work clothes busy.
The flat steel plate is fed into the mold.
"Bang~"
Then there is a formed metal part.
Raw materials, finished products, and scraps are piled haphazardly on the workbench in the middle.
"The tonnage of these small punching machines is 3 to 5 tons. They are used to punch some relatively thin small parts. These machines are all 10 tons or 15 tons... The blanking and molding of the Type 63 gun box are all based on these machines.
A hydraulic press of over 30 tons..."
He Hongtao followed Zhang Yu and helped Zhang Yu introduce these machines.
Zhang Yu listened indifferently, his eyes constantly scanning the surroundings.
Suddenly, Zhang Yu saw a caliper full of oil on a workbench.
Zhang Yu picked up the caliper and found that the caliper was full of rust, and even a small piece of the outer measuring claw was missing.
At first glance, it seems like it requires very little maintenance.
"Director He, do you use this caliper to measure parts?"
He Hongtao looked at the caliper in Zhang Yu's hand and said with a smile.
"Gong Zhang, our conditions here are limited and we can only use this measuring tool."
"But our molds are all accurate, so measuring tools are rarely used."
Hearing this, Zhang Yu almost laughed.
No wonder Form 63 is not good. Zhang Yu couldn't understand why He Hongtao had the nerve to say this.
"Then after you completed manufacturing, did you conduct final inspection on the guns?"
Zhang Yu has been walking around the workshop for a while. In the entire production workshop, he did not see any process inspection at all.
I'm afraid there isn't even a final inspection after production is completed.
Military goods!
In any process, there are three processes: first inspection - process inspection - final inspection, I'm afraid...
"Of course, after we finish manufacturing, the master workers will inspect it."
"We will only put it into storage after we make sure there are no problems."
He Hongtao's answer was clearly not what Zhang Yu wanted to hear.
"Director He, after looking around, I'm actually quite disappointed."
"Your workshop has been in existence for so many years, and you can't even meet the most basic measurements. How can you talk about the final inspection?"
"The standards of testing that you revere are of no use to me."
"Since it can be inspected with the naked eye, why would anyone design a caliper?"
He Hongtao was about to refute, but was interrupted by Zhang Yu.
"Now, could you, Director He, please find me a relatively standard caliper?"
"If there were no standard calipers, we wouldn't have to do the next step."
"I directly suggest to the Ministry of Armed Forces that you shut down this workshop to save you from wasting the country's hard-won materials."
He Hongtao's expression immediately darkened at this moment.
He Hongtao did not expect that Zhang Yu would be so disrespectful and lead hundreds of people in the workshop to directly pull away the fig leaf.
But He Hongtao was angry and did not dare to challenge Zhang Yu.
Because I was afraid of Zhang Yu, I was really tricked into the Ministry of Armed Forces.
He Hongtao waved to the young man not far away.
"Xiao Liu, go and help Comrade Zhang Yu find a good caliper."
Xiao Liu didn't dare to stop for a moment, so he ran out of the workshop and went to find the caliper.
Zhang Yu glanced at He Hongtao, then gave Xugong a look.
That means, 'XCMG, is your workshop director at this level?'
Xugong gave Zhang Yu a helpless look.
"Can you please calm down? Since you came to the firearms store, you have been taunting people non-stop. Can you calm down?"
Zhang Yu shook his head with a sneer on his face.
It's not worth it at this level, so let him give it some face.
After waiting for a while, Xiao Liu finally came over with a relatively clean caliper.
Zhang Yu reached out and took it, glanced at it, and immediately stuffed it back into Xiao Liu's hand.
"Go find a piece of cotton cloth, wipe it clean with gasoline or alcohol, and then bring it to me."
Xiao Liu followed Zhang Yu's instructions and wiped the caliper with alcohol.
After making sure there were no oil stains or rust, he handed it to Zhang Yu.
Zhang Yu took it and tried to adjust the claw.
"Are you sure this caliper is standard?"
When Xiao Liu heard Zhang Yu's question, he immediately nodded and said.
"Yes, this is new and unopened. I have been looking for it in the tool room for a long time."
Zhang Yu didn't say anything more and checked it carefully.
"This caliper has 3 wires worn on the outer claw and 5 wires worn on the inner claw."
Then, under the gaze of everyone, he took a freshly stamped magazine from the workbench and began to measure its width.
As soon as he took the first test, he was stunned.
"It's more than 10 silks too small, and the width at both ends is different?"
Zhang Yu thought he was on the wrong side.
I measured it several times again and still got the same result.
Put it down again, measure, still the same.
Zhang Yu simply put the caliper and magazine into XCMG's hands.
"XCMG, have you regressed in technology?"
"You actually let such a simple question develop?"
Xugong held the caliper and checked the magazine. The more he checked, the uglier his face became.
"He Hongtao, this is how you deal with me, huh!?"
"See for yourself, your stamped magazines are so different. How can you feel comfortable handing over the gun?"
"Do you know that this is a crime? This is a serious dereliction of duty. Do you, the director, still want to do this?"
"I always thought there was a problem with our design, but I didn't expect that your problem was bigger."
"The guns you manufacture are completely defective. You must give me an explanation, otherwise I will ask the leader to remove you from your post."
Amidst Xugong's roar, He Hongtao finally lost his position.
"Director Xu, we really didn't do this on purpose. This is a little smaller than what the drawing requires. Mainly because during assembly, if it is too wide, there will be gaps. If the opening is smaller, it can be assembled with just a pry..."
Before He Hongtao could finish his argument, Xugong interrupted him directly.
Staring at He Hongtao with a serious face.
"You are just farting, listen to what you have to say!"
"The opening is too small and needs to be pried. You are just dealing with official business."
"Since you did this, I declare that from now on, you, He Hongtao, will be relieved of all duties."
"Come two people and take He Hongtao away for me."
Xiao Liu called to the workers not far away and helped He Hongtao out.
He Hongtao kept struggling and kept shouting that he was wronged.
As the voice gradually faded away, Xugong apologized to Zhang Yu sheepishly.
"Zhang Yu, I'm so sorry. I didn't expect that we would have such a big problem."
"Thanks to you for pointing out our mistakes, otherwise we would have been going down the road of making mistakes."
"That ultimately led to the closure of the firearms facility, which led to the closure of the workshop."
Zhang Yu didn't want to hear these words anymore.
"Xugong, I'm not provoking you."
"Your level of seriousness now is far different from what you were before."
"This is not the level you should be at. I hope you can learn from this lesson and shine again with your firearms." If you like The Quiet Life in the Siheyuan, please save it: (www.sodu777.net) Search and read novels in The Quiet Life in the Siheyuan
The network update speed is the fastest on the entire network.