The ice stool is a method of torturing prisoners by placing a block of ice under their buttocks during interrogation. It is said that it appeared in the Han Dynasty, and Su Wu once suffered this punishment.
The leech bath is to put a bunch of leech in the bath tray and then put the prisoner into it. It mainly exploits people's fear. After all, a bunch of leech swimming around in the water is enough to scare people.
It is said that Boss Dai once used these torture methods on Japanese female spies, and the results were very good, so Lin Mo told Wu Wulin in detail.
When Wu Wulin heard this, his eyes flashed with gold, and he hurriedly said: "Old Lin, I will go and prepare it right away. Hehe... I will definitely let these Japanese female spies have a good taste."
"Well..." Lin Mo nodded and said, "Go ahead and try it! I just had a sudden idea. You have to try it first to determine the effect.
By the way, this method can be used on the two Japanese female spies, the front desk foreperson and the deputy foreman. Lan Jinzhu will leave it alone for now."
"Old Lin, is it..." Wu Wulin heard Lin Mo's instructions and looked into the safe.
Lin Mo followed his gaze and found that it was Yang Haicheng who was looking at him, and said: "Don't think blindly, Haicheng was acting before, and the scene just now was also deliberately staged by the other party.
I think this woman may have other thoughts, or she may not have been completely brainwashed by the Japanese, and is resisting the Japanese arrangements for her.
You may not know that using her to divert the other party's attention was not possible at the beginning. It was this woman who took the initiative to seduce Haicheng, and we just followed the trend.
She has already started to get in touch with her goal, but she has been slow to take that step. Now she is making such a fuss. Don't you think it's strange?
So I suspect that this woman should be resistant to the arrangement of using herself to perform a honey trap. This can explain her behavior. Of course, it is still speculation now.
As for the scene that happened at the elevator entrance, it was probably because Haicheng had played too hard to get revenge and made us misunderstand. Of course, it is not ruled out that she had other intentions.
By the way, when the other two female spies are being interrogated, you can let her observe and observe. When the time is almost up, I will go over and talk to her before deciding whether to use torture later."
"Okay..." Wu Wulin nodded and left to make arrangements. Lin Mo just wanted to go back, but was blocked by Wu Liangdong again.
"Master, I heard that a weapons warehouse was discovered here. Can you show me it?"
Lin Mo heard this, chuckled, stared at Wu Liangdong and said, "Old Wu, you won't go by yourself? If you want to ask me anything, just tell me!"
When Wu Liangdong heard this, his old face turned red and he said, "Master, I'll talk about this later! I'm still undecided. I heard that you have something you need me to do, so you can tell me first!"
"Okay..." Lin Mo nodded and told Wu Liangdong about his several actions and the need for some weapons.
"For carbine-style rifles, you just need to shorten the normal rifle. You can start with the two parts of the barrel and stock.
The barrel does not need to be too long. Our requirement is to have good accuracy and power at a distance of two to three hundred meters to cope with some special situations.
The butt of the gun is directly cut off and replaced with a grip for holding. An interface is designed at the end of the gun to install various butts. You can design the rest by yourself."
Wu Liangdong nodded and said with a smile: "This is not difficult to do. We should be able to produce a prototype gun in a few days. It will take ten days and a half to test it, and then it will be delivered to you."
"Hmm..." Lin Mo nodded and asked: "Old Wu, how is the repair shop going? I saw it at the training ground and they have made a lot of new things!"
When Wu Liangdong heard this, he smiled bitterly and said, "How should I put it, it's a mixed blessing! After turning into a firearms repair shop of the Intelligence Department, the factory can study guns openly, and everyone is very motivated.
There has been considerable progress in all aspects recently, including gun design, craftsmanship, production and other aspects. It has made great progress compared to the past.
It’s just that there are too few orders. Except for some mufflers, carbine kits and other products purchased from the office, there are basically no orders. Recently, I have basically spent money on them.”
Lin Mo listened and comforted: "You are in the initial stage. This is normal. You have to be hardworking. As long as your skills are strong enough, things will change sooner or later.
And don’t just limit your attention to guns, accessories and the like. Most of these things are one-off purchases. Consumables such as bullets are good business in the long run.
What’s more! The bullet presses and bullet reloaders you have are also good. There are many markets for them, so you can start with these.”
"Okay..." Wu Liangdong thought carefully and nodded.
"By the way, I went to the training ground a few days ago and Master Liao said that you have designed a very good carbine kit for the shell gun. Can you introduce it to me?"
"Okay..." Wu Liangdong nodded, with a slight smile on his face, and said: "The carbine kit that Commander Liao mentioned is a model that has both full-automatic and semi-automatic shooting, and uses a twenty-round magazine for ammunition.
The shell gun is also commonly known as the speed machine or twenty-gun.
Because the slide is not used for loading, it can be well combined with the kit barrel when the extended barrel is not used, and there is no sleeve, which also simplifies the kit structure.
The gun can be switched between fully automatic and semi-automatic. With the kit, it is equivalent to a submachine gun and a carbine. The magazine can also be replaced with a corresponding large-capacity magazine drum to increase the continuity of firepower.
The Mauser pistol bullets used in the shell gun have good power and a good range. With the addition of a carbine kit, the effective range is about one hundred to two hundred meters depending on the lengthened barrel.
By the way, young master, do you need me to send you some? It will temporarily replace the short rifle. Although it is not up to the requirements, it should be barely usable."
"Okay..." Lin Mo nodded and continued: "Send some to me at the training ground, and I will send more to my place. I will see if I can deliver it to my brother. He may need it.
By the way, I don’t have a gun here, so you have to provide it to me along with the gun, that should be okay, right?”
"Um..." Wu Liangdong smiled awkwardly and explained: "Master, I only have a dozen of these guns, and I pestered people in the office to plunder them from the confiscated warehouse."
This chapter is not finished yet, please click on the next page to continue reading the exciting content! "Uh..." Lin Mo rolled his eyes at Wu Liangdong speechlessly and said: "Leave a few for you to continue studying, and send the rest.
Here, I’ll prepare more kits and I’ll see if I can find a gun.”
"Okay..." Wu Liangdong nodded quickly.
"By the way, I heard that many of the guns you did research on were provided by people in the department. Isn't this a embarrassment to you?"
"No..." Wu Liangdong shook his head and said: "Normally, I also provide them with some small tools, customize some cold weapons such as daggers, and help adjust guns, etc. Our relationship is pretty good."
"That's good..." Hearing what Wu Liangdong said, Lin Mo felt relieved and continued: "I've seen a lot of things you made out of plastic at the training ground, but they look very rough. Is there some trouble?
Yet?"
"No, no..." Wu Liangdong shook his head vigorously and explained: "Master, those are the initial test products. We have made a lot of progress recently and have basically mastered the relevant technologies.
It’s just that the purchased raw materials have been basically consumed by the practitioners. The next batch of raw materials is still on the way and will take some time to arrive. By then, we will have a batch of members for the young master to take a look at.”
"Hmm..." Lin Mo nodded and continued to ask: "Old Wu, what are the prospects for using plastic in firearms? How is its performance?"
"How should I put it..." Wu Liangdong pondered for a moment and said: "The strength is okay, but the heat resistance is very insufficient. If it is used on the sleeve and fired twenty or thirty times in a row, it will basically be useless. Some small parts can also be used.
No.
However, it is sufficient to use it on the grip or the lower part of the frame of a pistol, and the handguards and butts on rifles can also be used. The kit effect is also very good and can significantly reduce weight, but the price is a bit expensive."
"It's normal to be more expensive. After all, the industry and technology are still immature, the cost is high and the output is limited. The initial price will definitely not be low, but the price will drop in the future. Don't let this limit you.
According to what you said, plastic is strong enough now, but not heat-resistant. Accordingly, it can be used on magazines, drums, gun holsters, magazine covers, depressors, reloaders, etc., etc.
Just the gun."
"I understand..." Wu Liangdong took a small notebook and wrote down all Lin Mo's suggestions and needs.
Seeing this scene, Lin Mo asked: "Old Wu, I heard that the repair shop has been able to produce gun barrels? What's missing is just better equipment?"
"Well... I can't say that. The craftsmanship of technicians and masters has indeed improved a lot, but it can't all rely on machines. There are still many deficiencies in the craftsmanship.
As far as the pistol barrel alone is concerned, the one with high technical requirements can only fire a hundred and eighty rounds. The one with lower requirements can fire hundreds of rounds normally, but it is not enough for use.
Of course, this is rifling. If it is a smoothbore gun like a shotgun, its service life may not be as long as that of genuine foreign guns, but it is still sufficient."
Speaking of this, Wu Liangdong stopped what he was doing and said with a smile: "Master, I have discovered a new use for lengthening the rifle barrel, which is to change the marks left by the bullet's rifling. Do you want to send you some?
"
"Oh..." Lin Mo became interested and said with a smile: "Is there such an unexpected surprise? Let me think about it! Hmm... I may not use too much here, send it to the training ground! I need it
I’ll tell you.”
"Okay..." Wu Liangdong nodded and asked: "Master, yesterday the department quietly gave me an order to research and produce several types of police equipment. Can you help me find out the details?"
Lin Mo heard this and said: "I know this. In order to enhance the police's law enforcement capabilities and reduce the police's military capabilities, the department is planning to make suggestions to the higher authorities to change the police uniforms.
There are some other considerations here, you don’t have to worry about this, just follow the instructions from the department, and there will be an order for you then, do you have any questions?"
"Hmm..." Wu Liangdong pondered for a moment and then said: "The police weapons specified by the department are revolvers and shotguns. With our current technology, it is not difficult to come up with suitable ones.
There are just some problems with production. After all, the factory has limited people, and the amount of police uniforms must be huge, and we may not be able to supply even a small amount."
Lin Mo heard this and said: "Your first priority is not production, but designing corresponding and suitable police equipment. You don't have to start from scratch, just copy and make some modifications.
As for output, you can think of some ways to standardize and set standard parameters for various parts. Then outsource the production of some simple and unimportant parts. You can produce the heaviest parts and assemble them at the end. This should be able to solve the problem.
many problems."
"Standardization? Is this feasible?"
Faced with Wu Liangdong's question, Lin Mo explained: "The repair shop is a department of the Intelligence Department. The scale cannot be too large. Let you produce the whole process. This is not worthwhile and will take up a lot of places.
If you want to develop, your focus should be on weapon research and development. As for production, just keep the production of important parts and outsource the rest as much as possible.
As for whether it is feasible, that is for sure. The requirements for some parts are not that high. As long as the acceptance standards are formulated, strictly implemented, and the price is reasonable, external factories will do it for you.
Besides, the business dealer you are looking for does not have to be an outsider! The Lin family is also moving into industry, and they can be supplied from here.
Of course, the parts will only be made into semi-finished products for you, which will ultimately require simple processing by you before they can be used. As for the price, we will give you a very favorable price."
After hearing this, Wu Liangdong felt relieved and continued: "Master, please give me some advice on the design! I'm afraid I can't control it here."
"Okay..." Lin Mo did not refuse, nodded and said: "I can give you some advice this time, but in the future you have to strengthen and grow as soon as possible."
"Understood..." Wu Liangdong nodded.
"Well..." Lin Mo pondered for a moment, then said: "In terms of purpose, the purpose of police equipment is to subdue gangsters, as long as it is powerful enough.
For revolvers, you can start with bullets. Choose one that is powerful enough and has a lot of domestic equipment. Otherwise, it may not be adopted. The nine-millimeter bullets of Huaji should be quite suitable. You can pay attention to it.
.
As for the shotgun, the barrel is shortened and the stock is sometimes made telescopic or foldable. This makes it lighter and reduces the range power. You can try to see if part of the bullet shell can be made of plastic.
There are two versions of the gun, one that uses a lot of plastic parts, and one that uses commonly used materials, so you can try your hand and test the waters."
Lin Mo was talking and Wu Liangdong was taking notes. When he stopped writing, Lin Mo asked: "Old Wu, over at the training ground, I should have told you about the subsonic sniper bomb. Have the arrangements been made?"
"The arrangements have been made, and the preparatory work has begun. Research can begin in the next few days, and the first-generation product should be available in less time."
"Okay, I won't ask any more questions then..." Lin Mo nodded and continued: "Today's action, I have a new demand here.
Even in arrests, once the numbers are at a disadvantage, it will be very difficult to capture someone alive. You need to develop a bullet that is not fatal and can cause the person to lose most of his ability to resist."
"Non-lethal bullets?..." Wu Liangdong fell into deep thought and said, "Reducing the charge? This won't work. The metal warhead does more damage, and the warhead must be replaced.
Wood? No...Plastic? No...well...it has to be soft, but what material is suitable?"