Seeing the concerns of several people, Lin Mo explained it carefully and spent a lot of time before reaching a consensus.
However, in addition to the shooting range test, there is also a period of trial on the training ground. Only after the performance is qualified will it be adopted depending on the situation. Lin Mo naturally has no objection to this. He said that passing the test does not mean cooperation. There is no trial period for testing.
He didn't dare to adopt it rashly.
Opening a new box, it turned out to be the same recipe, the same taste, ten guns and a large amount of ammunition. There were also oil-paper envelopes with additional instructions on it, but the gun was a revolver. I guess it was a revolver!
This is a revolver that can shoot shotguns. It has a longer cylinder and uses a .410 caliber slender shotgun. Of course, this caliber is not much different from .45, so .45 pistol rounds can also be used.
There are two kinds of .45 pistol bullets prepared in the box, one is a flanged pistol bullet, which can also be called a revolver-specific bullet, and the other is a .45ACP bullet, which is the M1911 bullet, and is used with the upper half-moon clip.
"It's interesting! There is more than one new weapon!" Wang Mingkun couldn't help but sigh after reading the accompanying instructions.
Lin Mo shook his head and said: "This gun is not of the same nature as the previous one. It is a new gun. It is true, but it only has an additional bullet chamber. The other parts are copied from the original structural design. These are basically unchanged.
Although the previous one copied a lot of things, at least it made a lot of new design adjustments based on usage needs, theories, new materials, etc. These were a lot of hard work, so it was considered an independent design.
new gun.
Of course, the revolver already has a mature and reliable design, and many of the various foreign revolvers are similar. However, the design improvements made based on the usage requirements and theories of the previous guns make this gun almost boring."
"...Hmm..." After saying this, Wang Mingkun understood. He looked at it and asked Wang Shoufei: "What should I say? Is this gun worth distributing equipment?"
Wang Shoufei grew up with guns. He is a gun-crazy maniac. With the opportunity and conditions at the training ground, he has mastered all kinds of guns. In terms of the use and understanding of firearms and weapons, he can be regarded as semi-professional.
An expert.
Wang Shoufei picked it up for inspection, then idled it a few times, and said: "The trigger transmission device uses a mature and reliable complete set of designs. There shouldn't be any faults. It's just that the bullet chamber has been enlarged and the shotshells have been added to the trigger.
More force is required to turn the left wheel.
Overall, it's a bit useless. The saving grace of this gun is that it can fire shotshells, but I have tested this bullet and found it to be less powerful. It was still on a long-barreled gun. The revolver barrel itself is shorter, so it is better to use a rotating gun.
The power of a wheel with a worse sealing structure will be lower.
Our main use for this kind of short and portable shotgun is to break doors. With this power, it may not be a problem for inferior doors. A good one will probably take two or three shots, and a better one will probably need to use up all the bullets. As for how good it is,
, then other bullets probably won’t be of much use no matter how powerful they are.
As for other types of ammunition, we estimate that we will not use them. Of course, there are advantages. Compared with truncated shotguns, this is a specially designed firearm after all, with stability, safety, controllability and the ability to wait for ammunition.
Depending on the quantity, etc., it’s definitely no worse than making do.”
"...It's amazing..." Lin Mo couldn't help but give a thumbs up after hearing this. It was not long before he was able to play with a gun clearly and analyze it logically. It was really a combination of ability and hard work.
Several people exchanged modest words, and Liao Tinghui interjected and added: "This gun can be issued as a backup weapon or optional. The most important thing is that apart from the above, it also has almost all the advantages of a revolver.
Failures such as stink bombs and jamming have almost no impact on use. If they occur, the remaining bullets in the cartridge can be easily fired. In missions such as assassinations and attacks, a higher error tolerance rate can be achieved to avoid a small failure.
causing the action to fail.
The runner mechanism relies on pulling the trigger to drive the hammer and runner. There is no such thing as loading. Pulling the trigger requires a lot of force, and it will not misfire easily. This gun requires more force and is safer. It is completely
You can disable the safety and allow the gun to be fired when you draw it.
This is a great advantage. In the event of an emergency, especially a sudden attack at close range, you can defend yourself and counterattack in the shortest possible time. Although the revolver gun reduces the power of the bullet, it does not have much impact at close range, not to mention the use of
They are all powerful ammunition, especially this shotgun, which is small compared to other shotguns. If you can hit the opponent with one shot at close range, you can basically settle the matter."
After some analysis and interpretation, several people nodded, but Liao Tinghui attributed the credit to what Lin Mo said before, which also attracted a few people to give in and be polite.
However, when Lin Mo opened several boxes of magazines, drums, etc., the few people could no longer sit still, and they were all gearing up, no longer caring about any vain politeness.
Because most of the magazines and drums in the box are matched with Somi. Since they were tried before and returned to continue to be modified and optimized, everyone is thinking about them, eager to see them through, and wondering when they can be finished.
Looking at the number of magazines and drums distributed in the box, it is obvious that all firearms have been optimized and modified and sent for official distribution. This is the weapon they use most easily, so can they not be in a hurry?
Seeing several people scratching their heads in anxiety, Lin Mo planned to wait and whet his appetite, but in exchange for Liao Tinghui pushing and urging him several times, Wang Mingkun and three others also stared at him with resentful expressions, which made him feel sick in his heart.
Another box of muzzle accessories and a box of gun stock accessories were opened. Lin Mo finally arrived...
"...Uh..." He was squeezed away, and he didn't even take a second look! He was pushed aside directly, and when he looked up, the three of them were already there, one by one, marveling at the baby.
The glossy black metal gun body, the pistol grip with dense patterns, the triangular telescopically adjustable and replaceable butt, the straight all-through upper rail, the tactical front handguard with dense heat dissipation hole rails, looks thick and short, with the upper side and
Exclusive suppressor aligned with front guard...
This chapter is not over yet, please click on the next page to continue reading! Except for the smaller size, magazine, and some remaining old weapon design styles, the others already have the flavor of various tactical weapons of later generations, but here
The times are still strange and new.
Modification parts such as the butt, grip, and front handguard, which require a certain amount of endurance, are also made of synthetic resin-clad steel. The steel is used to strengthen these parts, and the synthetic resin facilitates the processing of these complex structural lines.
For example, for the front guard, making holes in the metal and processing the bumps on the guide rails, with the current technology and craftsmanship, it would take ten days and a half of hard work to get a few of them done.
Although when processing synthetic resin, it is not possible to process all the holes and concave and convex structures in one molding. However, it is much easier to process the general shape and then perform drilling, cutting, trimming, grinding and other processes than processing metal. In terms of man-hours, it is only one
A worker can take one or two days.
The other parts are similar. Even because there are no complicated requirements for the thickness and structure of the front guard, it can basically be roughly formed in one go. After a little trimming and polishing, the processing is completed after passing the inspection.
The magazine and drum are also made of metal at the head, and synthetic resin is used in other parts. Since they are used, the strength should be no problem, but I don’t know how durable it is, but as long as it doesn’t break after just one use, it will be fine. Anyway, keep repairing.
Therefore, it is not unacceptable to replace performance with some cost.
Seeing several people put their guns on their backs, many team members who were collecting things next to them seemed to have their eyes caught, staring at them without blinking. Lin Mo was speechless for a while. As for that? He also took out the gun belt.
Upper back ←_←
Open the box again and find a box of strange accessories. Some of them look like gun butts, but only a small part of the shoulder. There are also wire ropes, and accessories with grips and triggers, but the grips and triggers of this gun are obvious.
It couldn't be removed, which made a few people confused.
"Didn't you give feedback before that this gun is a bit long to use? In a narrow environment like an alley, it is difficult to use it. This is a set of components to solve the problem.
Remove the long butt from the butt interface, replace it with the short butt pad, install the grip trigger assembly on the front handguard guide rail, then use another assembly to cover the gun trigger with the retainer, and then connect it to the trigger with a wire rope
.
In this way, you get a bullpup gun, which reduces part of the length and is more flexible to hold in a narrow environment. However, it also has disadvantages, that is, the feel, loading and other aspects will change, and even the techniques and tactics need to be changed and adapted. Compare
A reasonable plan is for some people to make adjustments during the operation.”
That being said, several people were very interested, especially Wang Mingkun, who had used this gun in actual combat before and knew the value of this set of components.
Lin Mo didn't say anything more and continued to unpack the box. Most of the muzzles and other accessories were unboxed. Some of the new models were sent for final installation, and some were newly developed and sent for testing. There were also many newly designed kits, but they were basically the original ones.
Based on this, details have been improved and optimized.
But there are also guns, so Lin Mo opened a box of machine guns. The model of the gun is FN Company's M1930 Browning light machine gun. The repair shop modified the muzzle part for this place, and came with various adapted parts.
Class muzzle sector.
"I remember that you seemed to have given feedback before about the unreliable performance of the ZH-29 semi-automatic rifle on the battlefield?"
"...Yes..." Xu Zhiyu nodded, with a bit of a bad look on his face, and said: "My team encountered each other in a previous battle. Afterwards, I came back to test it and found that the gun was very unreliable and even malfunctioned in a dirty environment.
After fiddling with it for a long time, I couldn't fire it again.
What's more troublesome is that after asking the repair shop, they said that there are flaws in the gun design and cannot be improved and optimized through modification. This is also the reason why we have been so ruthless in testing the gun recently. We are really worried about encountering it again, at least.
You also need to know what situations might cause problems with the gun and try to avoid them."
"...Understandable..." Lin Mo nodded, and then said: "Have you ever considered modifying this gun? Shorten the barrel, and then modify it like Suomi, you should be able to get a heavy-duty rifle that can be optional.
Of course, I am not talking about this type, but the original American gun. That gun has a speed switch, which makes it more controllable when used as a rifle. At the same time, it uses a light barrel, which is not like this type that has been modified.
Light machine gun modification."
"U.S. guns should use American-made ammunition, right? At present, we have basically used German-made ammunition for rifle ammunition. Is it a problem to use universal ammunition?"
Wang Mingkun raised a doubt. They had abandoned the previous Springfield sniper rifles and used sniper rifles modified from Mauser rifles. Now they have to change back?
"There is no other way! Without independent design and production capabilities, and if you want weapons with excellent performance, you can only make some choices. Besides, pistols do not have many calibers of ammunition, and even the same gun will have different calibers due to various needs.
There are many types of ammunition.
What's more, you are not many in number and have weapons to repair, so you don't have to worry about the supply of various types of ammunition. As for carrying out some special tasks, you can prepare in advance and choose weapons according to the situation! You still have a lot of choices.
, without too many worries of conventional troops.”
Several people looked at each other and nodded in agreement almost at the same time. The main reason was the test scene, which indeed made some of them a little scared. It would be nice to have a model as an alternative.