For book friends who haven’t collected it yet, please collect this book. If you still have any recommendation votes, please donate to this set of books. Thank you.
Tang Hao moved. His movements didn't seem to be any different from before. He carried his legs with his waist, his belt with his back, and his arms with his back. With a clang, the hammer hit the iron block.
When the hammer bounced up due to the reaction force, Tang Hao suddenly turned around, still using his calf to exert force. The rebounded hammer was already swung by him, and it was swung around in the air, with a strong sound of wind, and another
There was a loud noise, and it landed on the iron block again. Not only was this blow extremely fast, but it also seemed to be stronger than the first blow.
The hammer bounced high. Tang Hao's movements and the bounce of the hammer seemed to have reached a perfect fit. No sooner or later, just at the moment when the hammer was about to reach its highest point, his body
Drive the hammer to circle around and hit it again.
Tang San's eyes lit up. This was clearly a method of using force, using the rebound force generated by the collision of the hammer and metal to turn into the force of his next blow. The movements were perfect and coordinated, avoiding rebound to the greatest extent.
Instead, the force caused damage to himself, but turned this force into continuous blows. Starting from the second blow, the power of each blow exceeded Tang Hao's full strength, but it was still under his control.
Tang Hao's movements were getting faster and faster, and the casting hammer hit the iron block like a gun. The iron block continued to deform under the hammer's strikes. What was surprising was that the location where Tang Hao struck was extremely accurate.
When the block is knocked to half its original thickness and begins to become flat, the casting hammer in his hand will hit the edge of the iron block to cause it to flip over. In this way, the iron block will bear the force evenly.
With his hammer blow, instead of being simply smashed into a discus.
In the blink of an eye, the thirty-six hammers had been swung out. Tang Hao's hands drove the casting hammer to rotate three times in the air before the power on the hammer was gone.
The usual blow was not done by him.
The entire iron block was completely smaller between these thirty-six hammers, and it was difficult to see the impurities in it with the naked eye.
This is the real blacksmith skill, what a beautiful hammering technique.
"Do you understand?" Tang Hao looked at Tang San who was constantly pulling the bellows.
Tang San thought for a while and said: "I understand the principle of using force. However, this doesn't seem to be simple."
Tang Hao said calmly: "If you want to reach the level I am, there is only one way. Practice makes perfect. At the same time, you have to remember that if you are beating a piece of ordinary metal, it will be most likely to break when it has the most impurities.
When the impurities are gradually reduced, your strength can begin to gradually increase to maintain the effect of tapping. Strength control is the key here.
.Practice slowly by yourself. Don’t blindly increase strength and speed. Accuracy is equally important. At least you have to know where your hammer will hit. Otherwise, what’s the use of hitting again with strength?”
The casting hammer returned to Tang San's hand, and Tang Hao turned around and walked out.
His father did not break his promise, and he indeed taught him the method of casting. Moreover, judging from the things his father taught him, any industry has its own secrets, and it is not that simple.
For more than half a month, Tang San practiced the casting method of using force and hammering that Tang Hao taught him every day, even though he had Controlling Cranes and Capturing Dragons to assist in the control of strength, and he had the Purple Demon Eyes to determine
He hammered the position, but the forging method was more difficult to master than he imagined.
Since it is a full blow, the force itself is difficult to control. With the help of rebound force, it is even more difficult to control the balance of the body and hammer to the desired position. Without adding one hammer, the control required
The force must be increased a bit. The constant rotation of the body will not only make the brain feel dizzy, but also make the force of each hammer harder to control.
Fortunately, he had been hammering that piece of iron ore for a long time, and there were very few impurities in it, so it was not so easy to break. Otherwise, it would have been broken by his casting hammer that could not control the weight.
However, in the process of practicing, Tang San's operation and application of the Xuantian Technique, as well as the control of cranes and dragons, and the cooperation of Xuanyu Hands and Purple Demon Eyes, were making subtle progress.
From the first day when he could only swing two hammers without missing the position, half a month later, he can already swing seven hammers continuously and hit the iron block accurately. The progress is very obvious. At the same time, the iron
The blocks also became smaller and smaller under his full hammering, with results every day.
Of course, this is also closely related to the method of exerting force with the calves. With this method of exerting force, it greatly saves the consumption of Xuantian Technique, allowing Tang San to have more time to pull the bellows and
Carry out forging.
Back then, his father wielded thirty-six hammers, and it looked like he still had some power left, but he only had seven hammers. He didn't know when he would be able to reach his father's level. Whenever Tang San thought of this, he practiced especially well.
power.
These days, he seemed to have forgotten about martial arts and soul rings. Even when he went to the top of the mountain to practice the Purple Demon Eyes in the early morning, he was still thinking about how to swing the hammer.
Three months passed quickly. When Tang San could swing the hammer and continuously launch thirteen strikes, Tang Hao began to teach him how to forge the tools. Tang Hao's teaching method was very direct, that is, he would do it himself first.
Then let Tang San do it again. As long as he was a little beginner, let him practice on his own without much verbal guidance. He would only say a few words at key points.
It is precisely because of this that whenever Tang Hao gives advice, Tang San remembers it very clearly.