It's getting late, and Hell's Kitchen is very quiet now.
Leo drove the car all the way to the door of his house.
When they passed the corner earlier, Fudge had already said goodbye to Leo and drove back to his home.
Fudge grew up in Hell's Kitchen and knew how to protect himself.
In addition, Hell's Kitchen has been almost tidied up by Bucky, and Leo is not worried about his safety at all.
When he arrived at the door of his house, Leo asked Bucky to get out of the car, and then watched Bucky lift Old Tom out of the trunk.
Old Tom was obviously very drunk and had not yet woken up, allowing Bucky to hold his collar and walk towards the door of the house.
Leo rolled down the window and watched the two of them enter the house.
Then, Leo turned the car around and drove directly to the entrance of the El Building.
Leo got two surprising black technologies from Otto today.
These two technologies are as tempting to the mechanic Leo as annoying little goblins. How can he sleep at night?
Moreover, with Leo's current physical condition, he only needs three or four hours of deep sleep every day to be energetic throughout the day.
Therefore, in order not to waste his life, Leo naturally had to work until late every night.
Either hone your mechanical power, develop new mechanical technology, or upgrade Stim...
There are so many fun things to do, what’s the point of sleeping!
After greeting the doorman Zijing skillfully, Leo turned around and entered the company.
On the basement floor of the El Building, with two beeps, the security door opened, and Leo stepped into the dark laboratory.
The next moment, the lights in the laboratory automatically turned on, and a child's voice sounded:
"Hum, master, welcome back, Stim is at your service."
In the center of the laboratory, a round, tracked robot was shaking its long cylindrical probe head and greeted Leo enthusiastically.
"Steem, turn on your auxiliary modeling function, we have work to do."
Leo opened his system panel, and drawings appeared one by one, followed by miniature three-dimensional models.
No need to see it with the naked eye, as long as Leo selects a drawing, the model will naturally appear in his mind.
He can use God's perspective to view every corner of the model.
However, this model is just a dead object, and Leo cannot simulate or transform the model in his mind.
Therefore, he needs Stim's assistance.
Leo pulled over a chair and sat next to the experimental table in front of a home-made computer.
With his fingers flying, Leo quickly input the relevant parameters of the "Micro Nuclear Reactor" drawing and the "Intracranial Nerve Sensing Helmet" drawing in his mind.
"Buzz! The drawings have been obtained and are being automatically modeled..."
On the screen, three-dimensional models are displayed one by one, with a series of complex parameters attached to them.
Leo manipulated the model to rotate and zoom, and examined it carefully, and found that it was exactly the same as the three-dimensional model in his system panel.
Leo selected the "Micro Nuclear Reactor" model and ordered:
"Stim, model split!"
The next moment, the model was quickly unpacked into blocks.
Originally, he needed to draw the drawings by hand and then split them manually.
Now, with the help of Stim, he saves a lot of time.
He only needs to check whether the split module is correct at the end.
In this way, Leo saves himself the process of drawing drawings during the actual manufacturing process, which greatly improves work efficiency.
"New project, name, micro nuclear reactor, remarks, energy, import current drawings.
Estimated manufacturing target number, 1, statistics list of required materials!”
After careful inspection, the module split was correct, and Leo issued another order to Stim.
"Hmm, the new project has been completed, the material list has been compiled, and is being compared and analyzed with the inventory materials."
"Hmm, the analysis is completed, the material missing degree is 58%, the details are as follows."
A long list of materials appeared on the display screen, and the top one was the most important energy source in the micro nuclear reactor, uranium!
"Stim, print out the list directly in Old Tom's office and ask him to do it as soon as he comes tomorrow. The sooner the better."
"Buzz, successfully connected to the printer, ready to print!"
Leo had a flash of inspiration and quickly stopped him:
"Steem, delete the uranium element from the list. Even if you ask Old Tom to buy it, there will be no way.
Also, you must strengthen your study and be good at analysis and judgment. Don’t make such an obvious mistake again in the future.”
Leo is going to buy the uranium element from Otto's channel. It just so happens that when Otto comes to the El Building tomorrow, he will mention this matter to him.
I believe that as long as the money is in place, everything will not be a problem.
"Hmm, okay, Master, the materials list has been printed, and the uranium element has been deleted."
Stim's voice became a little aggrieved, and Leo couldn't help but laugh.
At the same time, in Old Tom's office, the printer spit out a page of A4 paper.
The entire El Building is now becoming more and more automated, with Stim, a powerful artificial intelligence, controlling everything.
The overall technological level of this building can definitely surpass the current civilian technology by several blocks.
Looking at the computer screen, most of the materials list has a red cross drawn on it.
Leo knew that the micro nuclear reactor project could only go like this for the time being, and it needed to wait for the materials to be in place before it could continue.
Leo followed suit again and created a new project based on several drawings related to "Intracranial Nerve Sensing Technology".
However, there was still a serious lack of materials related to sensing technology, so Leo could only print out a few more lists for Old Tom.
Wait until tomorrow, and Stim will automatically urge Old Tom to go shopping quickly.
Without key materials, Leo is temporarily unable to produce the actual object.
However, this does not prevent Leo from building the model of the new generation of mecha first.
"Stim, rename the project. Rename the 'Big Iron Block Armor' project to 'Viper 1' and remove its energy module.
Modify the project goals to include dexterity, portability, surprise attack, and ultimate kill.”
As mentioned before, the Big Iron Block Armor uses a high-compression battery pack as the energy source.
It has been created by Leo and is now gathering dust in a corner of the laboratory.
Because armor movement requires a lot of energy support, the high-compression battery pack is very large.
Therefore, the final big iron armor was made with a big belly, and Stim commented that the shape was extremely ugly!
"Buzz! The project has been renamed and the energy module has been removed."
As soon as Stim finished speaking, the corresponding three-dimensional model immediately appeared on the monitor and was slowly rotating automatically.
After removing the big belly and the energy tank on the back, the big iron armor...
No, it should be called Viper 1 now, it has finally become slimmer.
Leo manually adjusted the model and reserved a location for installing a micro nuclear reactor.
In order to pay tribute to Iron Man, Leo naturally placed the energy source on his chest.
But the micro nuclear reactor is a black iron block, but it does not have the dazzling light of the Palladium Ark reactor.
But it doesn't matter, Leo is going to put a luminous ray generator on his chest.
Put the frost stone in one half and the flame stone in the other half, like a mandarin duck pot, divided into two.
…
After working for a long time, Leo finally finished adjusting the drawings of the Viper 1 generation.
After finishing the drawings, Leo turned his attention to the large iron armor that had been collecting dust in the corner for a long time.
Leo cherishes time very much. Important materials have not been purchased yet, and the energy and control modules cannot be produced.
But he was actually able to manufacture the supporting mechanical skeleton of the Viper 1 based on the drawings.
This mechanical skeleton is actually relatively easy to make. After all, Leo already has experience in making large armors.
The mechanical skeleton model of the Viper 1 generation is optimized from the initial skeleton of the large armor.
As soon as he thought of it, Leo turned his attention to the big armor that had been gathering dust for a long time in the corner of the laboratory.
As long as the armor is disassembled and the mechanical skeleton is restructured, the mechanical skeleton of the Viper 1st generation armor can be successfully produced in no time.
Ding ding ding ding!
Bang bang bang bang!
Jab, jab, lala!
Buzzing!
Next to Leo, various parts and disassembly equipment were dancing around for two hours, but the transformation work was not 10% completed.
This speed made Leo quite helpless. Although he was assisted by instruments, some precise operations still required him to do it by himself.
And he only has two hands, so his efficiency cannot be improved.
After working for two hours, Leo was very tired. He had already taken off his shirt and was sweating.
People are not machines. After working for a long time, they need proper rest.
After dispersing the surging mechanical power, Leo simply sat down on the floor of the laboratory.
At the same time, the various light tools floating around his body lost their mechanical power and fell to the ground with a crash.
Leo looked at the Viper 1st generation skeleton in front of him, lay directly on his back on the floor, and murmured:
"It would be great if I could be like Monkey Sun! Three heads doesn't matter, but six arms is very important to me now."