There are some things that you can't just look at the surface. Sometimes you have to look deeper. Building a lot of houses cannot be completed in a day or two, because the foundation must be laid before the houses can be built on top. It takes time in Hancheng.
, it is impossible to lay a new foundation for you, we can only find an abandoned village and use the foundation of the abandoned village to build a house.
Many abandoned villages have been abandoned for a long time. There are many reasons for being abandoned. Many houses have no owners and their roofs have completely collapsed. As for the houses of poor people, as long as no one lives in them, they will basically be damaged.
If it weren't for the fact that most of them had no possibility of repair, Hancheng wouldn't have asked people to start over from burning bricks.
"Draw an area, and when the time comes, dig a hole nearby and build a big cesspit. Everyone has to go somewhere convenient. They are not allowed to urinate or defecate at will."
Hygiene still needs to be paid attention to. Anyway, after all, Chongqing does not have as many toilets as in modern life. As long as there are toilets in hotels, if you go to other small shops, they may not even have latrines.
Han Cheng checked the planning map and found that this was a place he had chosen for a long time. It was impossible for all the victims to be put together because there were very few dilapidated houses here and it would be too late to lay foundations.
"I know, I'll do it soon."
Han Cheng was responsible for the overall planning. In short, he completely settled these people, but it took a lot of effort. Especially the village's well must be dug again. The existing one is a bitter well and cannot be used.
drink.
"We need to find someone here to dig a well. I looked at the two wells at the head of the village. One well is completely dry, and the other is simply a well of bitter water. If this doesn't work, we have to dig it out as soon as possible."
Finding someone to look after the well is not Han Cheng's strong point. Then you have to find a Feng Shui master. These days, you have to rely on Feng Shui masters to dig wells. Han Cheng didn't have a good impression of these people at first, but they can find people who can dig wells.
The location of the well is amazing, you know.
The base area is now also managing all the monsters and monsters, so the Feng Shui masters are still under attack. Some masters are still living a prosperous life by relying on their ability to read water wells.
After taking charge of the production, there are some things that must be grasped. Han Cheng does not need to worry about the battle on the front line. The built mortars are used jointly by these regiment leaders. Considerable changes have taken place. The offensive of the troops is no longer a single one.
, and even said that it was possible to engage in combat with some Japanese troops who did not have much heavy firepower.
At this time, technology and production have basically reached a bottleneck period. As for an upward breakthrough, it is basically impossible to see it, because both in terms of equipment and technology, it has reached the top of what can be achieved now. Even if
If you think blindly, you won't be able to make suitable equipment. Hydraulic presses are important equipment for manufacturing heavy equipment and cannons. Now let alone hydraulic presses, I'm afraid there isn't enough cast iron.
"Manpower-operated bullet stamping equipment has been trial-produced, and the accuracy has been adjusted. The size difference with the German bullet is about one millimeter."
Han Cheng came to the repair shop. The manpower bullet stamping equipment of the repair shop was almost ready and was in the follow-up debugging process. Why should we mainly use German-made ammunition? Because German-made ammunition is produced in various types of bullets across the country.
All Mauser rifle bullets are compatible, but the ammunition produced by each factory is not compatible with all Mauser rifle bullets.
It’s not that we have never introduced German technology, but is this result a man-made or a technical problem? It’s not very clear. The military industry of the Republic of China in Nuo Da has just made itself to the level of India’s IWC. If we say that IWC in the late Qing Dynasty
It’s just that too many foreign firearms were purchased, but after all, there was a unified ammunition standard. Everything changed in the Republic of China.
"Can all types of guns be fired?"
"You can fight them all out."
An error of one millimeter is basically the limit that can be achieved. Such a small thing requires no less manpower and material resources than a mortar shell. The smaller the thing, the more laborious it is. As for the rifle grenade or grenade behind it
Tube, Hancheng has no further research and development plans because there are not enough manpower.
You can count the number of R&D personnel in the entire repair shop on your fingers. Many of them are mathematics majors. As for processing and manufacturing, most of them are not people who specialize in industry. Instead, they are all blacksmiths, and some have even beaten horseshoes.
They are all considered technicians.
"Then arrange for people to produce it. When the time comes, let the brigade commander send it out and let people from various regions pick it up."
The production of warheads has changed from all copper to copper foil and other materials pressed together, and then stamped into warheads. With the characteristics of copper, some materials have been replaced. The lack of copper is not just a matter of talk, but something that cannot be said.
To solve the problem, you may even think of ways to replace it with steel or iron warheads, but the lethality will be reduced a lot, and more importantly, the barrel cannot withstand it.
After 500 rounds, all the riflings have to be smoothed, which is the result of the sacrifice of blood in battle. Various materials are beaten into foils and then heated and pressed together with heavy objects, and finally the bottoms are melted together. Copper
The lubricity is still there, and a large amount of lead can be used in bullets, so you don't have to worry about hanging the chamber.
For others, this may be a small thing, but for Han Cheng, this is the best solution after spending countless materials. The amount of brass has been reduced by more than 80%, and the difficulty of processing has also dropped drastically.
, at least the current mold can support one day of use.
"Great, now we don't need to worry about ammunition production. No, I have to go have a drink with the brigade commander. Bring me a box of ammunition. I will report the good news to the brigade commander."
Han Cheng is the happiest at this time, because this is really the thing where he can make the greatest contribution. The problem of lack of bullet materials will be solved. Moreover, the copper foil is wrapped with lead, and then wrapped with some other metals, with steel in the middle.
As an armor-breaking material, the rolling effect of the bullet is greatly enhanced, and it is even a bit like taking the powerful path of AK.
For other technicians in the repair shop, isn't this a success for them? The production of foil materials is actually not difficult because they are all quite soft metals. Now that there are high-hardness materials, processing these materials is
It's quite an easy thing. And speaking of foil, it's actually not as thin as later generations. It's a little thicker, but it's still relatively thin. It actually feels like a layer of kraft paper in your hand.
"We have produced so much in total, shall we take them all?"
"Take them all. Don't work today. You all need to take a rest. Then just grab the production equipment."
Han Cheng came directly to the workshop and picked up the bullets on the table, overjoyed. He actually thought of other ways, but this was the only way to make greater use of the materials. He only needed to pick up the bullet casings later.
Because the only thing left that can be reused is the bullet casing.
Holding a box of ammunition, he greeted the guard behind him, and then the two of them rode to the brigade commander's side, because there were some things that needed to be shared.