Yes, 3D printing technology! And it’s super fast, and it can print electronic components of different materials inside the robot at the same time!
Those viscous liquids are not actually liquids, but are broken down into particles with a diameter of a quarter of a nanometer. Because the particles are too small, they look like liquids. A quarter of a nanometer is actually an atom.
In other words, the materials used in this 3D printing technology have gone beyond the scope of nanotechnology and entered the realm of atoms!
If you want to make a comparison, you will know that for example, the actual size of each nanorobot is 110 nanometers, which is a full 400 times larger than these metal particles!!
Because of this, the materials needed to print a robot are simply divided into three types: metallic silver-gray materials as the main structure, gray-white insulating materials as soft objects, and black conductive materials as electronic components. Different printing and manufacturing methods
When printing parts, this 3D printing instrument will also reorganize the materials of these parts at the atomic level according to specific needs to achieve different physical properties.
Among them, the main structure material is the most in demand. Tang Yu started preparing for it three months ago when he received the first material decomposition device, which is a spherical instrument with a diameter of ten meters. Because he was prepared to overwhelm with quantity advantage.
Skynet, so he did not use very good materials, but collected all the hundreds of thousands of car wrecks in the car cemetery, as well as the Terminator wreckage collected from the battlefield during this period, and obtained through trade as raw materials.
.
Not only that, he also opened several scrap metal recycling points in several cities under his control, asking all residents to contribute their excess scrap metal and exchange some cans with them. After three months of hard work, a total of
More than 500,000 tons of main structural materials have been manufactured. Even if losses are deducted, 5.6 million robots can be built!!
What’s even more powerful about this photon polymerization constrained 3D printing system is that it actually contains a space transmission system! When 3D printing is performed in the main factory, all materials are actually transported there! This is why Haibo
The secret of why the construction machine, the core of Dragon Company's legion, can produce robots anytime and anywhere is because of this transmission system. As long as the construction machine has enough energy, it can produce unlimited robots anywhere!
This kind of miniaturized space transmission system is very common in the world of "Borderlands". For example, the vending machines that can be seen everywhere on Pandora have this mechanism. As long as you buy something through the vending machine, the items inside will be obtained from the manufacturer.
Send it directly.
This technology can be understood thoroughly, and it is also a very terrifying technology, but unfortunately, Tang Yu has not even been able to fully analyze the 'Sky Leap' that he obtained in the world of "Overwatch". You must know that it is the most rudimentary space teleportation technology.
, not to mention the miniaturized teleportation system of "Borderlands".
The 3D printing factory built in the mountains produces robots at the rate of 10 Hyperion loaders every 30 seconds. Excluding the few seconds for intermediate system reset, this factory can produce more than 25,000 robots every day!! In other words, Tang
The materials Yu spent three months looking for were only enough for the factory to produce for 20 days!
After these robots were produced, they immediately formed a square formation of 1,000 units and headed towards New Lhasa, surrounding the Skynet Terminator Army! Not only that, Tang Yu also plundered trucks of all sizes from his own territory.
They are also constantly transporting robots.
For a time, the road from New Chengdu to New Lhasa was filled with robots! The 2-meter-tall Hyperion loader was moving forward on the road, with only the sound of mechanical operation and heavy footsteps, a uniform sound.
, even the earth is shaking!
A few scavengers were rummaging through rubbish on the roadside. When they heard the sound of footsteps, they emerged from their shacks. However, what they saw was a phalanx of robots that were moving forward in five columns! Each phalanx has a
In row 20, there was another square formation, and then another one. Their eyes were already dazzled, and they had no idea how many robots were passing by!
With a bang, the small half-can can that the scavenger finally found fell to the ground. He looked at the robot army with trembling eyes and murmured: "The end is coming... the end is coming..."
If this scene was seen by General Beria, then he might not even have the courage to launch a counterattack. However, because the commander's aircraft is high in the sky, it is not easy for Skynet to ensure communication and command between the troops.
, let alone the investigation into the hinterland of the Guardian Group!
At 9:30 pm on January 11, 2047, the remaining artillery of the Third Army of the Gray Army suddenly roared! The desperate General Beria launched a desperate attack, with the goal of breaking through the siege of the Guardian Group
, join the Terminator Legion!!
But at this time, something different appeared on the battlefield.
A strange robot model appeared on the Guardian Group's defense line. This robot was all painted yellow, with a flat body and no head. There was a huge infrared sensor on the right side of the chest, which looked like a one-eye.
Although the movements of these robots are slightly rigid, they are still very flexible. The large-caliber machine gun equipped on the arm that fires corrosive bombs is also a huge threat.
However, the combat capability of this unfamiliar robot model is still very average. It can even be seen in occasional battles on the battlefield that this robot is slightly weaker than the T-600, mainly because of its boxy body.
The structure is rather disadvantageous. When the Gray Army soldiers saw the Hyperion company logo on the chests of these robots, they called them Hyperion robots.
There are not many Hyperion robots on the battlefield now. Neither General Beria, who received this information, nor the commanders at all levels of the Third Army paid much attention to this kind of robot. They think that
, this kind of thing, which is more like a civilian product than a military robot, is probably another civilian robot of the Guardian Group, which was armed and thrown into the battlefield after being forced into a hurry. Because the Guardian Group has a long history,
The crude G-1 engineering robot, which has almost only an iron frame left, often grabs a weapon and goes to the battlefield.
…
In the City of Steel, the battle has entered the final stage. The isolated and helpless defenders of the Guardian Group are no longer able to survive under the continuous attacks of the Gray Army!
Outside the City of Steel, in a logistics base set up by the Gray Army, a force of more than 1,000 people is gathering. They will make final preparations. After sorting out their equipment and ammunition, they will attack the city again. Ten Challengers
The Type II main battle tank and more than fifty Samurai infantry fighting vehicles will serve as the important firepower fulcrum of this force.
Lieutenant Colonel Klich was also making final preparations on one of the Challenger II tanks with enhanced communication functions. His armored regiment suffered heavy losses in the City of Steel, and now only these relatively intact ones are left.
Tank. The previous regiment commander had been killed in action, and now he has become the commander of the armored regiment again, but the strength in his hands is at most equivalent to a mechanized infantry battalion.
Now he hopes to end the battle of Steel City as soon as possible, and then take a good rest to free himself from this nightmare. The ubiquitous snipers and the ubiquitous cold guns almost broke his nerves.
At this time, there was suddenly a dull roar of engines in the air, and a chirping electronic synthesized sound that was completely incomprehensible! Some soldiers pointed at the sky and screamed in horror! Lieutenant Colonel Krissy quickly raised his head,
He was also stunned immediately!
I only saw an extremely huge figure approaching in the sky!