Letting the Mining Bureau "downsize" is the fundamental solution to Fucheng. If employees leave voluntarily, it will be easier for the coal mine to go bankrupt in the future. In the previous life, the open-pit mine officially went bankrupt in about nine years. Not only the open-pit mine, but also Fucheng
Other coal mines also went bankrupt**, and more than 90% of the employees lost their jobs. These workers lost their jobs and could not find new jobs. Fucheng's economy collapsed in an instant.
This life is much better. The establishment of industrial zones has created too many opportunities to make money. Everyone has more choices. In the past five years, more than 3,000 employees of the Mining Bureau have chosen to leave their original units. They
They are living a better life, and as Fucheng's reform continues, new job opportunities will increase. I believe they will make the best choice.
There are still five years left before the open-pit mine goes bankrupt. If the prosperous market in Fucheng can absorb all these workers in these five years, then there is no doubt that the tragedy of Fucheng in the previous life will completely disappear. That would be perfect.
After Jiang Botao and others left Fucheng, North Industries Group returned to peace again. Of course, this so-called calm means that it can finally work with peace of mind, and no other cumbersome things will disturb everyone.
In the next six months, everyone's focus is to realize the industrial production of "Exploration One". Although Liu Lang looks down on "Exploration One", it is the country's first self-developed CNC machine tool after all, even if the servo system is not domestically produced.
, but the cost is still much lower than that of foreign imported products. As long as industrialized production is achieved, a large number of domestic orders can be obtained.
No, there are now more than 200 orders, most of which are state-owned enterprises. In addition to them, there are three private companies who also have orders. Wanhe Group purchased five machine tools at one time, and Gemei Air Conditioning Factory also purchased two.
There is another company, it turns out to be Midi Air Conditioning Factory, and this company also wants to purchase two units.
Meidi Air Conditioning Factory is an air conditioning factory in Guangdong Province. It has been established for three years. Although its market share is not comparable to that of Gemei, this brand is well recognized in some places in Guangdong Province.
In the past, Meidi Air Conditioning was also a well-known company in the country. Its air conditioners, microwave ovens and other electronic products were at the national first-class level. In this life, they were taken advantage of by Gemei Air Conditioning Factory. The situation seems to be very bad, but don't forget, the Chinese market is too big.
Big, there will never be one company that is the only one, let alone air conditioners, even computers, and industries such as automobiles are also very competitive. Gemei air conditioners have only temporarily taken the lead. It is hard to say what will happen in the future. Others may catch up from behind.
Sex is not absent either.
Liu Lang will never suppress his domestic counterparts because of his own interests. On the contrary, he will encourage it. It would be great if there is a company like Norinco that is powerful. Of course, whether you can catch up with it depends on your own strength.
According to the price of 450,000 yuan per unit, the total price of these orders is already close to 100 million yuan. The profit margin of each unit is 32%. This profit margin is very high, so as long as the production line is installed, it can
There was a profit of more than 30 million.
Many workers have long started to calculate how much share they can get, and the calculated amount is terrifying. If they work well, they can get more than 30,000 yuan a year at most. That’s more than 30,000 yuan! What kind of household with 10,000 yuan? It doesn’t count at all.
What, anyway, a new wave of wealth is coming, and everyone is working at full capacity.
Of course, the assembly line is not important. What is important is the development of a new generation of CNC machine tools. This is the top priority. The country hopes to manufacture CNC machine tools with world-class standards within five years. To meet this standard, it must improve precision.
and alloy materials.
There is not a big problem with accuracy. Liu Lang now has several processes that can achieve an accuracy of 0.2 mm, which has reached international standards. However, the process must be based on high-quality materials. Without high-quality materials, no matter how good the process is, it cannot be achieved.
.
Norinco is not good at smelting alloy materials and cannot do it on its own. The best alloy materials research and development institutions in the country are Huaxia University and the National Alloy Materials Research Institute, which is responsible for the national research and development.
For the material research of aircraft engines, the precious materials Liu Lang obtained from Kaminsky were handed over to them. If they couldn't study them, Liu Lang would be scolded.
Liu Lang stayed in Fucheng for half a month. During the half month, he had to give everyone two-hour lessons during the day and teach them new craft methods. High-quality stainless steel was consumed like waste paper, even if everyone was used to it.
It still feels a bit pity to use this method.
, this is too "wasteful", of course, this method is also the most skillful, just like what do soldiers rely on to practice marksmanship? Isn't it just shooting non-stop, when you seriously shoot 100,000 rounds or even 100
With thousands of bullets fired, your marksmanship will naturally be accurate.
In addition to teaching everyone his "stunt skills", Liu Lang stayed in his office, not reading and studying, but lying on the bed to "close his eyes and rest his mind" for two or three hours, from noon to dinner time.
During meal time, he was the first to rush to the cafeteria. He had to eat three bowls in a row, which was more than a worker who had worked for a whole day.
"Has the boss become a loser?"
Everyone was "slandering" Liu Lang in their hearts. This was one of the few opportunities they had to "laugh at" Liu Lang, but no one was so stupid as to say it out loud.
Of course, Liu Lang didn't become a loser. The reason why he ate a lot was because he used his brain too much, and the reason why he used his brain so much was to find a high-quality alloy material that could be smelted that met the standards.
The material Kaminsky gave him was very precious. It was the detailed parameters of seven high-quality alloy materials, including nickel-chromium alloy, aluminum-manganese alloy, titanium alloy, etc. These seven high-quality metal materials are not the final finished materials.
It is just an intermediate material. To meet the standards of aircraft engines, further proportioning tests are required. However, with the intermediate material, the corresponding tests are much less. Now the research institute focuses on titanium alloys and chromium alloys.
This kind of test requires continuous high-temperature testing to determine what kind of crystal lattice appears at what temperature and what kind of properties it has. The final result is to achieve the specified metal properties, such as being able to withstand high-temperature heat flow of 1,500 degrees.
, unit area can withstand impacts of hundreds of thousands of Newtons, etc.
This is a very complex test. The success depends on the ratio of materials and forging. Maybe one percent more of a certain material or the temperature falls below a certain limit will have completely different properties. You can only test it bit by bit, even if
It was Kaminsky who provided detailed materials, but the final product required at least hundreds of experiments to obtain.
Norinco does not have the corresponding equipment. Fortunately, Liu Lang has an extraordinary brain. His brain is sometimes equivalent to a large computer. After inputting the parameters he knows, he can conduct virtual experiments.
"Twenty percent of nickel-chromium alloy exhibits this property at a high temperature of 1,200 degrees, and 15.3% of titanium alloy exhibits this property at 1,400 degrees. If the two alloy materials