But the student from Ye Haibin muttered: "When we repair it, you won't have to use it anymore."
Du Qiu smiled and said, "Then everyone will be happy."
When Ning Yuze saw that Du Qiu had no objection, he immediately nodded and said, "Then I'll trouble Dr. Ye."
Just as Ye Haibin was about to walk over, Du Qiu suddenly said: "Dr. Ye, how long will it take you to repair this equipment?"
Ye Haibin paused for a moment, then said proudly: "It won't take too long, almost half an hour, never more than an hour."
He spoke so vividly that the time went from half an hour to an hour in the blink of an eye.
Vice President Zhao stepped forward and asked, "Dr. Ye, do you need help?"
"No need, just have my students."
Ye Haibin led the students, and the two began to operate the equipment.
Ye Haibin did not start the repair directly, but quickly checked the location where the fault occurred. After reconfirming his judgment, he immediately started to run the system to the debugging state.
Chief Engineer Tang looked on and explained to Ning Zeyu: "Dr. Ye has studied Harth's machining center in the United States and is familiar with both the software and hardware.
Otherwise, I wouldn't be able to invite him to help. Another point is that the Machine Tool Research Institute is also a national-level unit, so confidentiality is not a problem."
Ning Shuangshuang suddenly said: "Whether there will be problems with confidentiality is not something you can guarantee. We will investigate clearly."
Chief Engineer Tang was startled. He knew that Ning Shuangshuang was from the security department and seemed to be a leader.
He immediately laughed and said: "Yes, yes, this is your job scope."
At this time, Du Qiu chatted with Vice President Zhao. This Vice President Zhao Yicheng was very familiar with the precision machine tool industry and had a technical background. He was currently the technical vice president of Feiyu Technology.
He and Chief Engineer Tang once had a fierce dispute over technical issues regarding the deployment of unmanned production lines, and the two had a feud from then on.
"This production line was built by General Engineer Tang. I can understand that he has a protective mind, but if he doesn't correct it when there are clearly unreasonable things, that's nonsense."
The two of them were some distance away from Chairman Ning, Chief Engineer Tang and others. Zhao Yicheng deliberately lowered his voice, so he didn't have to worry about being overheard by Chief Engineer Tang.
Du Qiu could see that this matter had become a knot in Zhao Yicheng's heart, otherwise he wouldn't be able to talk about it with him, a person he met for the first time.
Of course, the main reason is that Du Qiu is a knowledgeable technical person. After Zhao Yicheng revealed the original point of dispute between the two, it was obvious that Du Qiu was on his side.
From this, Zhao Yicheng unknowingly told the whole story of what happened.
During the chat with Zhao Yicheng, Du Qiu discovered that Zhao Yicheng was very knowledgeable about the field of high-end machining centers and had deep connections in the machine tool field across the country.
This made Du Qiu attach great importance to Zhao Yicheng. If he could attract this talent to his company, the promotion of the Tianqing system would be greatly accelerated.
It's a pity that Zhao Yicheng is now the technical vice president of Feiyu Technology. As a vice president of a state-owned enterprise, it should be impossible to jump to his small company.
Before I knew it, an hour passed.
Ye Haibin hadn't finished repairing the equipment yet. At this time, he was sweating profusely and was restarting the machine.
Ning Yuze looked at his watch, but did not urge him.
When Chief Engineer Tang saw this, he secretly complained in his heart, "Old Ye is too down-to-earth. You should have spent more time talking just now. Why should you restrict yourself so much?"
After thinking about it, he walked over, got close to Ye Haibin, and asked quietly: "How is the situation?"
Ye Haibin raised his head and smiled, "After restarting, there should be no problem."
"Okay, you are indeed a returned doctor."
Chief Engineer Tang happily returned to Ning Yuze and said: "Chairman, Dr. Ye has repaired the equipment and is now restarting it. It will be ready for use after the restart."
Ning Yuze nodded and said, "Yes, the equipment can be repaired today, and the construction schedule should not be delayed."
"Restart successful, no problem!"
When Ye Haibin saw the normal code flashing on the controller screen, a big stone fell in his heart and he couldn't help but shout out.
Ning Yuze showed a smile on his face, walked forward and said, "Dr. Ye, you are really talented! Thank you for your hard work, this time..."
Before he finished speaking, the machining center suddenly sounded a warning sound and a red light flashed.
Zhao Yicheng, who had just come over, immediately shut down the equipment.
"How is that possible? It has obviously been repaired!"
Ye Haibin's face turned pale, and he looked at this processing center as if he were looking at a disobedient giant beast.
Ning Yuze looked serious and asked, "Yicheng, what's going on?"
Zhao Yicheng smiled bitterly and said: "It's the same fault, it's happened again."
Ye Haibin felt like an eggplant beaten by frost. He had never encountered this kind of situation in his experience of using Haas machine tools in the United States.
Chief Engineer Tang murmured to the side: "What should we do? If we continue to delay like this and miss the deadline for delivering parts, that will be a serious matter."
"Chairman Ning, let me try it, please?"
Du Qiu's voice suddenly sounded, and everyone immediately thought that he and Ye Haibin had just agreed to carry out restoration work one after another.
Chief Engineer Tang was a little impatient and said: "Dr. Ye has failed. You are so young, so don't go up and cause trouble."
"Xiao Du, come here!"
Ning Yuze's voice was very firm, joking, this was the person he invited.
Although he didn't know whether Du Qiu was really capable of repairing this equipment, since Du Qiu said before that he could, he had to let him try.
After all, this young man wrote top-notch CNC control software by himself.
There are absolutely only a handful of such talents in the country.
Du Qiu nodded and walked up to the console of the machining center.
However, he did not start the equipment immediately, but disconnected the equipment from the network connection of the production line.
"Hey, if you disconnect from the network, this device will not be able to work in conjunction with the production line."
Chief Engineer Tang looked strange and couldn't help but said.
Zhao Yicheng stared blankly and murmured: "Is there really something wrong with the production line's automatic control system?
But how will it affect the internal processing program process of the machining center?"
Du Qiu acted quickly. After disconnecting from the network, he quickly debugged the program code of the machining center, eliminated errors, and reset many states.
Then he turned back and asked Zhao Yicheng, "Vice President Zhao, do you have a laptop? Find one for me. I need to connect to the server on the production line."
"Oh, okay, wait a minute."
Zhao Yicheng found someone and quickly brought a laptop and network cable.
Du Qiu took it, took out a USB flash drive from his body, plugged it into the computer, and then booted from the USB flash drive.
The computer quickly ran in a debugging environment, and Du Qiu used a network cable to connect the laptop to the production line network.
With hands like wind, he quickly typed in a series of instructions, and a program was implanted into the server of the production line.
Not long after, a series of prompt messages with red text appeared on the interface.
"As expected!"
Du Qiu turned to Ning Yuze and said, "Chairman Ning, come and take a look!"
Ning Yuze walked aside curiously and looked at the lines of red information on the screen. When he saw the content of the information clearly, he was shocked.