The previous chapter was posted in error and has been corrected. If you have subscribed to the wrong chapter, just click in again and read it. Today is equivalent to three chapters.
Until then, Aegis Motor Company can be regarded as a large automobile manufacturing company with fully independent R&D and manufacturing capabilities. It can completely get rid of dependence on external sources for core automobile parts and become completely self-sufficient without looking at the face of any supplier.
Don't worry about being grabbed by the throat and taken advantage of.
Of course, what we are talking about here are only the three core components that are controlled and monopolized by a few manufacturers, especially the major automobile groups.
As for other components such as interiors, seats, lights, etc., which have little technical content and are relatively complex, they are still purchased from outside to save time and energy.
After all, Aegis Motor Company has only been established for less than two months and is already developing very rapidly. If the production of all parts is completed by itself, it will need to purchase a large amount of equipment and hire more corresponding personnel. The stall will be opened in a short time.
If it is too large, it will have a negative impact on all aspects of management and production.
Moreover, the profits of these non-core links are not very high, so there is absolutely no need to spend a lot of time and energy or invest a lot of money on them.
What Chen Mo wants to develop is a high-tech enterprise, not a labor-intensive electronics factory.
Therefore, all low-tech, low-profit, and low-efficiency links will be produced through outsourcing.
To make a car, there is no need to produce even the screws yourself. As long as you master the core technology and production links, do not let the outside world take control of your life, grasp the highest profit margin and production management efficiency, some high investment and low return
There is absolutely no need to do the unimportant steps yourself.
In addition to the adjustment of various production departments of Shenshi Motors, Chen Mo also separated some personnel from the original processing workshop, assembly workshop, R&D department and other departments to establish a new company independently.
SHIELD MACHINERY COMPANY!
After the previous production and construction of automated production lines, they already had the production capacity of robots and other mechanical equipment. This time the first phase of the industrial park project was completed. While Chen Mo was adjusting the production workshops of Aegis Motor Company, he simply separated the mechanical manufacturing part directly.
came out, and a new machinery manufacturing company was established in the reserved new factory area.
Chen Mo did not simply split the original production workshop into two parts.
From the time Chen Mo took over the car company, the company's human resources department began to recruit a large number of personnel for various positions at Chen Mo's request. However, due to Jarvis's screening and control, a large number of unqualified personnel were eliminated, and the recruitment speed was slow.
It's not fast, but more than a month has passed, and many people have joined in after passing the review. It is with the addition of these manpower, and with their assistance, the automated automobile production line can operate like this
Construction was completed in a short period of time.
Now that the construction of the production line is completed, although the orders for "Knight" have increased a lot, there is still some surplus of personnel.
The establishment of an independent machinery manufacturing company this time was based on some of the old employees of Aegis Motor Company as the backbone and the new employees who joined the company.
Since the machinery company's equipment is purchased separately, and there are not many old employees transferred from the company, the production capacity of Aegis Motor Company itself has not been greatly affected, while the machinery company's factory buildings, equipment and personnel are all
After it was in place, it was quickly put into production, but this time the production was not the robot equipment related to the automated production line, but basic industrial equipment such as machine tools and forging presses.
Just like the manipulator, Chen Mo has a full set of technical information and drawings, equipment, professional workers, engineers and technicians. Although there will be some trouble in the initial stage, it is not a problem to manufacture it.
Chen Mo copied the technical drawings of various advanced industrial equipment from Hydra. With this machinery company, these equipment can be gradually transformed into finished products and applied to Chen Mo's business empire.
After all, it would be too troublesome for him to use space to bring equipment from the movie world. Not only is the amount he can bring back each time limited, but it may not be available every time.
Moreover, the sudden appearance of a batch of overly advanced equipment out of thin air would easily arouse suspicion, so Chen Mo kept all the equipment he brought from Hydra in the basement of the castle for his own use.
The cost of purchasing all of them from outside is too high and the delivery time is too long, so you must buy them in advance. In addition, at this stage, it is good to say that the technological level of the products is not too high, and the purchased equipment is enough to meet production needs. However, as the company grows,
With the development, there will definitely be more advanced cutting-edge products in the future, and the current world-level equipment will not be able to meet the needs.
Since Chen Mo has a complete set of technical information, he can produce it himself.
On the one hand, in order to train and train the company's employees, on the other hand, it was inevitable that he would suddenly create too advanced equipment and arouse suspicion. The first thing Chen Mo came up with were some basic industrial equipment that was comparable to the current world's advanced level.
Technical data and drawings.
These equipments can already meet the current needs. In the future, as the company develops and personnel skills and experience improve, we can gradually come up with higher-tech equipment information as needed. This step-by-step approach will not arouse too much suspicion.
.
Although the first phase of the SHIELD Industrial Park project has been completed, Su Wan has not been idle. On the one hand, she has to take care of Chen Mo's life, and on the other hand, she has to be busy with SHIELD Automobile Company matters, and she also has to prepare
The second phase of the industrial park project is about to begin.
Although the area of the first phase of the industrial park is already very large, in addition to those already occupied by Aegis Motor Company and the newly established Aegis Machinery Company, as well as the factory buildings reserved for later expansion, there are still many vacant areas.
However, as the company develops, the company's expansion speed will become faster as time goes by. If we wait until needed to start construction, it will be too late. Therefore, some planned projects must be constructed in advance.
Su Wan's daily busyness was not much different from before. Chen Mo simply handed over the work of Aegis Machinery Company to Anna.
She was so valued by her boss less than a month after joining the company. Anna was overjoyed and at the same time worked very hard and diligently. The establishment of SHIELD Machinery went faster and smoother than Chen Mo expected.
On this day, Chen Mo came to the company for the rare occasion. After inspecting various departments and factories, he listened to reports on recent work from the leaders of various departments of Aegis Motor Company, as well as Su Wan and Anna in the conference room.
The sales volume of "Knight" remains high, although it is not as crazy as some time ago, and there are nearly a hundred new orders every day.