Chapter 368 The screw forming machine is completed
After learning that these two machine tools were designed by Liu Gen, who had just arrived in the lathe engineering department, everyone present seemed a little silent. They did not expect that these two drawings were designed by Liu Gen.
They who have been working in the lathe department all know how difficult it is to design new machine tool drawings. In addition, there are not many experts in machine tool design in the arsenal. If they want to redesign a new machine tool, it will naturally be quite difficult.
difficulties. But now? Liu Gen designed two new machine tools in a short period of time. Doesn’t this mean that they are all waste?
Even Liu Gen, who just came to the lathe engineering department not long ago, was able to design two new machine tools, but they didn't make any move. Compared with Liu Gen, everyone present seemed a lot worse.
"I didn't expect it was really designed by Captain Liu. When I came here before, I had some guesses, but I just didn't dare to believe it."
"Now it seems that Captain Liu is indeed a genius. Without any higher education, he was able to design two machine tools after designing two mortars. Captain Liu's talent far exceeds ours.
." Kong Jue's voice sounded. He, who had always been indifferent, now looked at Liu Gen with a somewhat fiery gaze, as if he was looking at some beautiful woman.
That's not right. For a person like Kong Jue, even if a beautiful woman appears in front of him, I'm afraid he won't have any reaction.
Everyone present looked at Kong Jue with complicated eyes. From a rational point of view, they knew that Kong Jue was right. Being able to design two kinds of machine tools undoubtedly fully proved Liu Gen's ability. Even if Liu Gen designed
The two machine tools are a bit crude, and in some aspects, they are a bit backward, but they are sufficient for the current arsenal.
It is even said that if Liu Gen designs too advanced machine tools, the arsenal may not be able to manufacture and use them.
"Gong Kong was joking. The comrades present are all my seniors. I am completely lucky to be able to design these two machine tools. Besides, I still have a lot to improve on my seniors." Liu Gen said very sincerely.
Said. Liu Gen knew why he was able to produce the drawings of these two machine tools. He was also working and clearly knew the abilities of everyone present. Compared with everyone present, Liu Gen really felt that he still had a lot to learn.
.
Engineer Qi looked at Liu Gen with satisfaction. He knew that he had read Liu Gen correctly. Even though he designed two new machine tools, Liu Gen was still humble enough, which is extremely rare.
"Genzi is right. The comrades present here are all the backbones of our lathe department and the advanced technical elements of our lathe department. Genzi's learning ability is good, but compared with everyone else, there is still a big gap. On weekdays, everyone
Comrade, you need to give more guidance to the root, and try to make the root grow up as soon as possible, so that everyone can be more relaxed." Engineer Qi said with a smile.
"Easy to say, easy to say."
"Our lathe department just needs to vigorously cultivate talents like Genzi."
"Yes, I feel the same way."
"..."
Generally speaking, everyone is very satisfied with Liu Gen. They can all see Liu Gen's respect for themselves, which makes them have a lot of affection for Liu Gen. After achieving certain achievements, they still maintain enough
Everyone will like his humility.
"Captain Liu, these two new machine tools are good. I just wonder if you can explain to me the ideas for designing these two machine tools?" Kong Jue's voice sounded again.
Kong Jue looked at Liu Gen seriously and asked Liu Gen rashly. He knew that Liu Gen might have other ideas, but Kong Jue didn't care about this. For Kong Jue, he just wanted to solve the problem in the shortest possible time.
He solved his confusion within himself. As for how Liu Gen viewed himself, he didn't care.
Others looked at Liu Gen, wanting to know what Liu Gen would answer. They also wanted to know Liu Gen's ideas for designing these two machine tools. But they knew that it was not the right time to ask, and asking Liu Gen rashly would probably make Liu Gen feel that he
They are doubting Liu Gen. Now that Kong Jue is asking directly, they can naturally get some light and see how Liu Gen will answer.
"Genzi, don't worry, Kong Gong has such a personality. In our lathe department, because of Kong Gong's personality, few people usually get around him unless there is a problem with the machine tool that cannot be solved."
"Gong Kong's personality is not very good, but in our lathe engineering department, his technical level is one of the best. Speaking of which, Gong Kong has not been in our lathe engineering department for a long time, less than a year, and he is a graduate of Yanjing University.
A top student." Foreman Qi was worried that Liu Gen would be angry, so he quickly explained.
Liu Gen's expression didn't change much, but he smiled a little. He understood why Engineer Qi explained to him. His eyes fell on Kong Jue, and the two looked at each other. Liu Gen was sure that Kong Jue really didn't
Regarding other bad thoughts, at least from the serious look in Kong Jue's eyes, he really wanted to get the answer from Liu Gen.
"Work together, I know that. During my time in the lathe engineering department, I also heard about the exploits of the hole workers."
"I believe everyone wants to know my ideas for designing these two machine tools. Today, while everyone is here, I will explain it in detail."
"..."
Liu Gen carefully explained his ideas for designing these two machine tools, and he was very detailed. He wanted to tell everyone present all his understanding and ideas about these two machine tools. Liu Gen knew that the arsenal had many talents, and the lathe engineering department
There are also many talented people. If each of us can design a machine tool, the arsenal will soon be expanded again.
Everyone present listened carefully to Liu Gen's explanation. At the beginning, everyone still had smiles on their faces. Five minutes later, everyone took out their notebooks and carefully recorded Liu Gen's explanation. After Liu Gen's explanation
What everyone learned was a new way of thinking, and there were some things they didn't understand. They recorded the things they didn't understand and waited until Liu Gen finished explaining before asking.
Half an hour later, Liu Gen's explanation was over, and everyone's eyes towards Liu Gen changed significantly. Before, everyone looked at Liu Gen with no problem, but they looked at young people more. But now, everyone present
Everyone no longer dared to regard Liu Gen as a young man. From Liu Gen's explanation, they knew that Liu Gen had his own understanding of machine tools, and even said that he was better than them in some places.
Everyone is not a fool. They know that Liu Gen is better than themselves in some aspects, so naturally they want to learn more from Liu Gen so that they can also become better.
Foreman Qi looked at everyone present and could clearly see the changes in everyone, and such changes were what he wanted to see. As the head of the lathe department, what Foreman Qi most wanted to see was the technical level of the lathe department.
Continuously improving, before Liu Gen came to work on the lathe, the workers in the lathe department would get together every week to discuss problems in operating the machine tools and their own work insights.
It is also through this method that the technical level of the workers in the lathe department can be continuously improved, allowing the lathe department to be invested in production and manufacturing in the shortest possible time.
"Genzi's explanation is over, but the work of our lathe department is not over yet. Everyone, be prepared! Once we get the consent of Director Cheng, we will fully devote ourselves to the production of these two machine tools and strive to produce them in the shortest possible time.
Make these two kinds of machine tools." Foreman Qi said seriously.
Liu Gen and others responded in unison: "Yes!"
The next day, Foreman Qi transferred some workers from the lathe department to manufacture the screw forming machine and the bullet reassembly machine. In order to ensure that there would be no problems in the process of manufacturing these two machine tools, Foreman Qi specially transferred
We have recruited some workers with higher technical level to ensure the accuracy of these two machine tools during manufacturing.
As the designer of these two machine tools, Liu Gen is naturally involved in manufacturing machine tools. In the process of manufacturing machine tools, Liu Gen and others put in extra effort, day and night. Sometimes, in order to polish a suitable part, they would
Only after re-doing it and polishing more than a dozen parts by hand can the most suitable parts be produced.
Originally, Liu Gen thought that with his own design drawings and his own experience, there would not be too many problems in manufacturing machine tools, but in fact, many problems arose during the process of manufacturing machine tools. The biggest problem was the accuracy of machine tool parts.
, in order to ensure that machine tool parts have sufficient accuracy, everyone will invest a lot of energy in manual polishing.
But even so, mistakes will inevitably occur, and mistakes will mean that new parts need to be polished by hand. Liu Gen and others have no choice if they choose to polish machine parts by hand. Who wants the arsenal without suitable equipment?
?
It took a full week for Liu Gen and others to successfully create the screw forming machine. As for the bullet reloading machine, it still took a certain amount of time.
In the lathe department, Liu Gen looked particularly excited at the ugly screw forming machine in front of him. Only those who have experienced the process of polishing parts and manufacturing machine tools by hand will know how difficult it is to manufacture such an ugly machine tool.
In the process of manufacturing this machine tool, the technical level of Liu Gen and others has improved to a certain extent. If they were asked to manufacture a new screw forming machine, it would definitely be much easier for them.
"Genzi, get ready to start this screw forming machine and see how this machine tool that we made is doing." Foreman Qi patted Liu Gen's shoulder and said with a smile.
Foreman Qi was also a little sad. In order to manufacture this screw forming machine, the lathe department spent a lot of energy, but in the end they were able to successfully manufacture this machine tool, and it was all worth it.
Director Cheng on the side looked at this ugly machine tool expectantly. For the arsenal, this machine tool has a very special meaning. If it can build this screw forming machine, then the arsenal will definitely be able to manufacture more machine tools in the future.
Director Cheng seems to have seen the arsenal flourishing and producing large amounts of weapons and ammunition every day!