What is a third-generation tank? There is no clear concept, but many things are still conventional.
For example, the power system.
One thousand and two hundred horsepower is almost the lowest standard. Of course, the highest standard is one thousand and five hundred horsepower. Don’t talk about how much your weight is. If you don’t support a diesel engine with a horsepower of one thousand and two sides, you will be embarrassed to come out and say hello.
Now, the tank diesel engine with a capacity of 1,000 horsepower has been completed. As a result, Lao Ba asked for a capacity of 1,000 and two horsepower. Qin Zhenhua frowned when he heard the indicators introduced by the other party.
Of course, there is a diesel engine with a capacity of 1,200 horsepower in China. Since its development, the Black Panther diesel engine has a capacity of 1,200 horsepower. However, this engine is still under test and is not perfect. It is improved for the first time.
At 1,200 horsepower, there will definitely be various small problems to overcome. In this regard, Lao Ba requires mature tank and diesel engines.
Needless to say, because it is the most advanced technology in China, whether it can be exported, the diesel engine is still under test, and the climate in the tropical region such as Lao Ba is not considered. Therefore, if it is used rashly, it may be
Not suitable! I never mentioned this before. What everyone prepared was a diesel engine plan of 1,000 horsepower.
Just as Qin Zhenhua frowned, Wu Ruihua, who was standing beside him, said to Qin Zhenhua in a low voice: "If you talk about a mature 1,200-horsepower diesel engine, we also have MTU396 diesel engines introduced by the coal provincial diesel engine factory, you can
Output such a great amount of power.”
In the past few years, Qin Zhenhua has been busy and has not paid much attention to the coal-provincial diesel engine factory, while coal-provincial diesel engine factory has been making progress? In 1986, they introduced 396 diesel engines from MTU Company.
The production license began, and the production of the 396 diesel engine was produced.
Of course? Of course, there are Mia's help? At the same time, there are some back-ups left by the Germans, and there are production licenses. After all, it was said at that time that as long as you can sell how many units in the Oriental Powers, you will give the Oriental Powers the export license.
However, if you only have a production license, how to produce it? The other party didn't say it? I originally thought that the Eastern powers had no ability to produce independently at all? I needed to continue importing MTU's 396 diesel engines? At least I had to import a large number of parts? What's the result?
By the year, the coal-provincial diesel engine factory has increased the domestic production rate of this diesel engine to more than 90%, which can be said to be a product produced independently.
Its most suitable use place is the diesel locomotive, submarine, speedboat and other equipment? After all, it is a bit large? But now, if you want to put the duck on the shelves, take out this mature diesel engine for Lao Ba to use? It is also a solution.
It's right.
First release website
Now, after hearing Wu Ruihua's words, Qin Zhenhua nodded: "Well, we can achieve this. We have a mature 1,200-horsepower diesel engine in China. We can assemble it on the Khalid tank. At the same time, the gearbox words,
We plan to use the LSG3000 hydraulic transmission system imported by ZF Company. This system is currently being planned to introduce technology to produce it in China."
Germany's hydraulic transmission system is famous, almost the royal gearbox for the third generation tank. Even the Arjun tank on the opposite side uses this gearbox. The Eastern Power also plans to use this gearbox to equip its own third generation tanks.
.So, we are now actively preparing to introduce technology and produce it ourselves. As long as we can produce it ourselves, it can be used for Lao Ba. At that time, if the Germans are forced to force themselves, they can also use the L7 tank guns of that year.
If you cover up and change a little, you will not belong to the Germans.
However, if that kind of power system is used, the power cabin of the tank will become huge!
"Well, we are looking forward to the perfect power system solution of the Eastern Powers." Berg did not question at this time. After all, the wonderful performance of the 85 tank has already satisfied them. They believe in the technology of the Eastern Powers.
However, Qin Zhenhua didn't know that it was precisely because he was eager to launch the plan to adopt his own 396 diesel engine, which led to the project being delayed again and again. With the continuous delay, new indicators were constantly being proposed.
, and the future of Khalid tanks almost ruined this.
Qin Zhenhua is not a saint, and he has made a mistake at present. Of course, from the current perspective, this choice is not wrong. The Eastern power designed tanks for Lao Ba. Of course, he hopes that the supporting systems inside will be produced by our own side, so that we can pursue it.
Maximize profits and can control the unit price of the tank.
"We will definitely work hard." Qin Zhenhua said.
"Next, let's talk about the protection capability of the tank. We hope to achieve a protection capability of 450 mm." Berg continued. This standard has actually been introduced before. The first machine factory has also conducted repeated research and found that
A solution to the problem.
"Please allow me to give a detailed introduction to this design." Qin Zhenhua said: "Our previous design plan was based on the above-the-body body as the main protective equipment. If you want to achieve such protective power, the body body will be
The top must use a very thick composite armor plate to meet the requirements, and the bottom armor must also have a large thickness, which greatly increases the weight of the chassis, and the space inside the head of the car is greatly reduced, so we plan to borrow it.
The design plan of the M1 tank.”
Fearing that Lao Ba would not accept it, Qin Zhenhua carried out the American M1 tank, which would make it easier to convince the other party.
"The solution of the M1 tank?" Sure enough, Berg was very interested: "What solution?"
"We plan to adopt the bulletproof design of the first lower bottom, which means using a piece of first lower bottom composite armor with a certain inclination and a large thickness as the main bullet surface of the tank, which greatly simplifies the pressure above. The top upper armor is an almost horizontal thin piece
Compound armor. In this way, the vehicle body can have enough space and strong protection. At the same time, in order to give the driver a better field of vision, we also plan to move the cockpit to the center of the head of the car."
In general tank designs, the body of the vehicle is used as the bulletproof surface. In order to increase the protection force, this surface must be made into a large inclination, so as to protect the armor-piercing bullets fired by the opponent. Now, the new trend is to use a
Thin layer of armor steel is used as the armor on the top, and this layer of armor is level. In this way, if the opposite side has to fly over, it cannot hit the armor on the top, and can only hit the armor below the head of the vehicle, increasing the thickness of the armor below.
, as the main protective layer.
This is a bold design, it depends on whether Lao Ba accepts it or not.