"Old factory manager, you are back!" When I saw Zhao Guodong's figure, everyone present was surprised.
Ma Panshan, the old factory manager at that time, had long retired. Later, Zhao Guodong became the factory manager and strongly supported Qin Zhenhua to carry out reforms in the first machine factory. It was a vigorous and vigorous process. After the pain of the first machine factory, it finally rejuvenated.
.
Afterwards, Qin Zhenhua was pushed out by Zhao Guodong and became the factory director. As for Zhao Guodong, he went further, went to the capital, and became the head of the Northern Company.
Everyone knows that Zhao Guodong actually does not want to leave the Yima Factory, but Zhao Guodong wants to give way to Qin Zhenhua and free up the position of the factory director for Qin Zhenhua. At the same time, it is also to continue to escort Qin Zhenhua. After all, the most important thing now is international trade.
In international trade, the ground weapons of the major eastern powers are still transferred through the northern company. In this way, Zhao Guodong can provide strong support to Qin Zhenhua on a larger stage.
Now, Zhao Guodong suddenly returned to the first machine factory, which made everyone feel happy and confused. Is there anything wrong with this? Can't I say on the phone that I have to come back this trip?
"Well, after a long time, I miss our first-machine factory. Come back and take a look." Zhao Guodong said: "Let's go, let's go to the production line to take a look."
When he heard that Zhao Guodong was going to the production line, no one refused. So Zhao Guodong led the group and entered the workshop.
The sparks of the arc splashed, Lu Feng clenched the welding cap with his teeth, held the welding handle firmly with his right hand, and was welding a gap in the vehicle body. Whenever the welding rod was used up, he would install the spare welding rod, almost
Without wasting any time, the position of the weld is still red, so welded it down.
This kind of welding operation is quite hard and cannot be stopped during the welding process, otherwise the quality of the welding will be reduced. A seam may take one day to weld. Keep in this posture and slowly move the welding gun bit by bit.
Today, the welding time has reached the end. When Lu Feng put down the welding gun, his teeth became a little sore, his arms were numb, and his legs could not stand up.
"Master Lu, thank you for your hard work." At this moment, a voice came from beside him: "You, don't always rush to the front line to do welding. Your task should be to train a large number of people for our machine factory.
This is what you need to do most as a welder like you.”
Hearing the sound coming from his ears, Lu Feng raised his head in surprise: "Director Zhao?"
It has been a long time since I met Zhao Guodong. Lu Feng was extremely excited. Every year during the Chinese New Year, Director Zhao would visit these old workers with superb skills, which moved Lu Feng quite well. Now, on the production line, Director Zhao is here again.
!
"Well, Master Lu, what is this we welded?" Zhao Guodong asked.
"The 88C main battle tank is the fifth prototype. Because it is a prototype, I brought the most skilled workers to weld. The 88B and 88A tanks we are currently producing, and the welding tasks have been done.
It was the apprentices who were doing it," Lu Feng said.
At present, the production tasks of the first machine factory are still proceeding in an orderly manner. A batch of Type 80 tanks had been produced at that time. Later, the technology of Type 85 foreign trade tanks was used to improve the Type 88 tanks.
For some reasons, the first one was the 88B type, and later a new extended gun barrel was replaced and the 88A type was improved. Although the army is short of money now, it can also order dozens of vehicles every year, so the production line of the tank workshop,
In continuous production.
In addition to the 88B and 88A tanks that are being mass-produced, the 88C tanks are still being tested.
Compared with the first two models, its changes are quite large. It has been replaced with a 125mm tank gun, a welded turret, and an automatic loader. It can be said that this type of 88C tank can be provided to the army at present.
The most advanced tank.
Now, the third generation tank is still under test, but the 88C tank is already fully mature because it uses foreign trade technology. It is said that it can be put into production directly, but the army is still very cautious and requires more production.
The prototype car was tested, so there is the one that Lu Feng is currently welding.
"88C main battle tank?" Zhao Guodong nodded: "This tank is currently highly rated in the capital. Many people say that if our third-generation tank project fails, then our 88C tank will be topped off
OK."
Hearing this, Qin Zhenhua shook his head helplessly: "No, Uncle Zhao, this idea of resuming the second best is not good. No matter how our 88C is changed, it will be improved with the foundation of the second-generation tank.
The third-generation tanks under development are simply incomparable. The ideal situation is that both tanks can be shaped and equipped with troops. Our third-generation tanks are used as high-end goods. The current 88C tanks are used as low-end goods, just like Russians.
The combination of T-80 and T-72 is average, with high and low combinations.”
Hearing this, Zhao Guodong nodded. After all, the Eastern power has limited financial resources and it is impossible to afford to equip advanced third-generation tanks in large quantities. This 88C tank should be a better choice. Although its performance is worse, its price is cheap.
Can be produced in large quantities.
Moreover, poor performance is also the difference in mobility and protection. If you want to talk about firepower, they are all the same tank guns, and their firepower will always be the same fierce.
[Receive red envelopes after reading books] Follow the public account [Book Friends Base Camp], and you can get a maximum of 888 cash red envelopes after reading books!
"How far is our 88C tank from service?" Zhao Guodong continued to ask.
"In fact, the army has no money. If the army has enough funds, it will be able to be put into production now. Moreover, since this tank uses a 125mm cannon, the shells must be prepared for new ones, and at the same time, a three-person method is adopted.
The members of the tank crew also need to be adapted, so the tank troops are dragging their backs. Now they are slowly swaying. In fact, if they are to be put into production, they can be put into production now."
Qin Zhenhua has strong confidence in this tank. After all, the 85-2AP has begun to be in large quantities in Lao Ba. Lao Ba is the most picky and can express satisfaction with this tank, let alone his own side.
Where is the army?
It's still the army that drags on its back!
Zhao Guodong nodded: "Well, then our factory must be prepared. One batch can be produced at any time, and there is no need to be too many. Twenty vehicles are enough."
As soon as these words were said, Qin Zhenhua felt his eyelids jump up. The meaning of Uncle Zhao's words was really obvious. He mentioned the topic of military parade with Wang Erzhu a few days ago. Now,