The advanced nature of the Leopard 2 tank has left a deep impression on everyone. It is one lap, no, two laps larger than our own 59 tank. It has seven pairs of road wheels. The body is very long and the interior space is very large.
It's big, and because of the turret basket, when the turret rotates, the gunner doesn't have to move his feet to follow the rotation of the turret. It's quite comfortable for the tanker. There's even sponge and leather inside, which is definitely enough.
enjoy.
However, it is just an eye candy. The price of such a tank is quite high. Even their own production cost is close to one million marks. If it is to be exported, the price will be even more expensive. Buy 500 tanks?
Five cars are probably enough.
On this day, everyone felt heavy. They had seen a world-class advanced tank, but they were destined to miss it.
While they were visiting, in another corner of the city, MTU's Mercedes-Benz heavy truck finally drove into the workshop.
When the girl jumped out of the car, a middle-aged man from below came up to her.
"Mia, you're back. Thank you so much. If it weren't for you, we wouldn't know how to get it back." The man said to the girl.
"Auguste, don't waste time. Where's the forklift? Unload this five-axis CNC machine tool and let's quickly see the benefits of this new processing equipment. We spent a lot of money to buy this.
Yes, I hope it will be as advertised and more efficient than our two three-axis machine tools." Mia said and began to direct other workers below, opening the carriage of the heavy truck and wrapping the wooden boxes inside
The machine tool was unloaded and transported to the clean and tidy turbine blade processing workshop.
Mia is a technician in MTU's turbine blade processing workshop. Although she has only joined MTU for less than two years, she has already shown her extraordinary mechanical talent, especially in improving production processes and increasing production.
In terms of efficiency, she is definitely a good hand. It is said that this girl once dismantled her father's car in her garage when she was in elementary school.
The tank engine is changing from supercharging to turbocharging. In the past, they used two ordinary three-axis linkage CNC machine tools in the workshop to process it. They didn't think there was anything wrong with it. However, Mia did.
Very dissatisfied, at this time, advanced German machine tool companies have developed five-axis CNC machine tools to process products with special shapes, such as turbine blades, propellers, etc., which have inherent advantages! The processing efficiency will be greatly improved.
improve.
Therefore, under Mia's suggestion, they purchased a five-axis CNC machine tool. However, the transportation problem of the machine tool has not been solved for a long time. The anxious Mia personally drove a heavy truck and drove the machine.
The machine tool has been shipped back.
The packaging box was opened. This CNC machine tool is a whole and can be placed in the processing workshop. It seems to be about the same size as a three-axis CNC machine tool. The accessory equipment on the side is also densely packed.
After unpacking and plugging in the power, Mia, impatient, said to August again: "Computer, connect the computer to it!"
August was originally the head of the turbine machining workshop, but since Mia arrived, his identity seemed to have changed and he became Mia's follower.
For example, now, after Mia finished speaking, August walked to the computer nearby, connected the serial port data cable to the CNC machine tool, and then started the CAM software on the computer.
Before the arrival of this machine tool, Mia had already started simulating it on the computer. This set of software was bought at a large price and was completely compatible with the five-axis CNC machine tool.
After struggling for more than an hour, the machine tool finally started.
Mia stared at the processing space inside the plexiglass. The workpiece was rotating back and forth on the turntable, and the tool was moving left and right. Looking at this scene, a smile finally appeared on her face.
"Hey, August, have you seen it? Its processing efficiency is so high. Compared with three-axis machine tools, look at the A-axis rotation inside, which avoids the tedious cutting we used to do, and the shape is formed in one go!
Look again, the C-axis is also rotating!"
August stared at the girl's face. At this time, her concentration was so cute, and there was a slight throbbing in his heart.
"Mia, to celebrate that this machine tool is put into operation, how about we have a drink after get off work today?" August said to Mia.
This invitation has been sent out countless times. In Germany, beer is their favorite, and Mia has long been old enough to drink.
Facing the invitation of the man beside her, Mia shook her head as usual: "I want to study it and see if there is room for improvement in its processing." She looked at the clock hanging on the wall. At this time,
It’s already time to get off work.”
In Germany, few people work overtime. Work is work and life is life. No company dares to ask employees to work overtime. However, if individuals have hobbies, that is an exception.
This Mia only has machines in her eyes. Although she is so beautiful, her eyes are very bright, and her lips are even more sexy when viewed from the side, but she never seems to have a good impression of any man.
Could it be that she doesn't like men at all, but only likes machines?
"Okay, then let me study machine tools with you." August said helplessly, hoping that after being together like this for a long time, this girl would have feelings for him.
…
"It's a pity that we didn't even get a chance to drive today. They just let us go up and have a look." After dinner, Wang Erzhu still felt a little disappointed. They were well prepared and were waiting to get on the Leopard 2 to race.
, who would have thought, just go up and have a look.
It’s not pleasant at all. Think about how high-spirited you were when driving the Challenger, and now, there’s no chance!
At this time, in the hotel room, when you open the window, you can see the Isar River flowing slowly. On the other side of the river, street lights are dotted, and the pointed buildings are reflected in the lights at night, which is full of exotic style.
"We can't afford it, so they don't let us burn more gas. Maybe they are deliberately suppressing us." Qin Zhenhua said, "However, when we come to Germany, if we really want to spend money, the best thing to buy is,
It’s still a CNC machine tool.”
Hearing what Qin Zhenhua said, Wang Erzhu immediately nodded in agreement: "Yes, especially the advanced five-axis CNC machine tools. If we can introduce one, the machining accuracy can be improved by many times!"
Wang Erzhu's article at that time was about the introduction of processing equipment, and he was looking forward to this kind of CNC machine tools.
Five-axis linkage? Looking at Wang Erzhu, Qin Zhenhua shook his head helplessly: "We have money, and others won't sell it. It is a strategic material. If it can be sold to us with three-axis linkage, it will be good."