Chapter 278 Strict requirements (for the helm master
The anxious Ma Panshan saw that the boxes here had been opened by Qin Zhenhua and could not be restored. He was about to collapse. Even if he blamed Qin Zhenhua for this matter, that would not work.
He was definitely going to be implicated, and what was even worse was that he could have been remedied, but Qin Zhenhua didn't care about him at all.
Now, when Ma Panshan talks about the warranty issue, Qin Zhenhua always behaves like this and doesn't care at all. As the director of the No. 1 Machinery Factory, he has no face at all, so the annoyance in his heart is naturally incomparable.
"Boom, boom, boom." After taking apart the first side, Qin Zhenhua started to take apart the second side. Each time, it was like hitting Ma Panshan's heart. Ma Panshan stood there, as if
It's just like redundant.
"Come on, Director Ma, don't delay our work." Qin Zhenhua said to him: "We are about to get on the forklift."
The machine still has to be put on the forklift. Only the forklift can move it down and move it to a fixed position. Now Qin Zhenhua doesn't pay much attention to Ma Panshan. All his eyes are on this CNC machine tool, and he is looking forward to it.
After so long, he finally got it. Now, Qin Zhenhua can stay in No. 1 Machinery Factory. These CNC machine tools are his goal.
"Director Ma, why don't you go take a look at the workshop below? Speaking of which, our first branch factory is so close to the main factory, but Director Ma hasn't been here for a long time. I guess we all miss you.
"
This sentence is like riding a horse and looking forward to leaving.
After the last bidding came back, Qin Zhenhua was excluded from the R&D team. This behavior of burning bridges aroused the resentment of many people. If Ma Panshan went to the workshop now and was seen by others, he would definitely be surrounded.
Got up.
Even now, it is not appropriate to stay here for a long time. If the workers hear that he is coming soon, they should swarm around him.
That was a mass event.
With Ma Panshan thinking like this, he had the idea of retreating. Anyway, the matter was at this point, and there was no use for him to stay.
At this moment, the sound of Jeep 212 was heard outside again. When the car stopped, Zhao Guodong's voice came: "Our factory here is scheduled to install CNC machine tools. We have already thoroughly cleaned it.
Today Qin Zhenhua was coming to dismantle the CNC machine tool, and even Zhao Guodong did not come out to stop him. It was because he left and heard that someone from Germany was coming, so he hurried to the station to pick him up. At this time, he did not know that Qin Zhenhua had already taken action.
A tall German man came, accompanied by an interpreter. At this time, he got out of the car, stood outside, looked at the gray exterior wall of the factory, and said: "No, no, this kind of window sealing
If it is not strict enough, once the weather is windy, sand and dust will definitely enter, which will affect the cleanliness of the factory. Replace it, you must replace it! I suggest that you use our most advanced aluminum alloy door and window system.
Maintain perfect sealing and reflect what a modern factory should look like."
Aluminum alloy? After hearing the translation, Zhao Guodong immediately frowned. That thing is a material used to make airplanes. Do you know how expensive it is? It is actually used to make doors and windows?
Besides, this is a production workshop of a heavy industry factory, not a luxurious villa. Is there any need to build such a thing?
"Mr. Detrich, do we need this?" Zhao Guodong couldn't help but ask.
"Of course it is necessary!" Detrich said: "Your industry follows Soviet standards, five major and three coarse. Now, if you want to introduce our Western standards, you have to take a refined route, especially in processing. We
The technology is several times your existing standards, and the requirements are naturally strict. This is the spirit of craftsmanship and striving for excellence. Mr. Zhao, I understand your thoughts, but if you don’t do this, then when the CNC machine tool is working, it will reach
If the results are not as expected, you can’t blame us.”
When Deitrich said this, he had a condescending attitude, the spirit of craftsmanship, and striving for excellence. Do you understand? The way you used to do it is not possible. You are not afraid of a bad environment or hardship. However, if the environment is not good, you will
It will affect the accuracy of processing and the quality of finished products!
Look at our workshop in Germany. It is clean and tidy. The windows in the workshop are also well sealed. You must make rectifications here!
After saying that, he opened the folder in his hand: "We need to import a batch of aluminum alloy doors and windows. I will write down the specific quantity first and we will coordinate later."
"Mr. Detrich, what are you doing?" Zhao Guodong looked at his record and was very curious. At the same time, an ominous feeling arose in his heart.
"Record the areas where you need to improve to meet our standards. After these areas have been rectified, we will inspect them and pass them before you can unpack, install and debug the machine," Detrich said.
At this time, his piece of paper was not blank. Some items had been recorded on it, but they were all in German, which Zhao Guodong could not understand.
This...they are here to trick people! Zhao Guodong reacted immediately.
Originally, they just purchased a batch of CNC machine tools. As a result, the other party made a fuss about the installation and asked for more fees. Now it seems that it is not just the cost of installation and debugging. These CNC machine tools are the mother of laying eggs.
Chicken.
Even the factory building is required to be rectified. They inspect it with strict requirements for excellence. Once the factory building fails to meet the standards, installation and debugging will not be carried out, or if the accuracy is not met, the responsibility can be shied away.
The West is a capitalist society, so everyone is trying every means to make money!
Zhao Guodong's heart became heavy. The factory could indeed allocate some funds, but it was already very difficult to raise funds to develop diesel engines by itself. Now, he still had to be blackmailed by these foreigners. He still felt unwilling to do so.
In particular, they also spoke plausibly and with the spirit of craftsmanship, and what they said cannot be refuted here.
Several people were talking and walking, and Detrich continued to talk about air conditioning: "Advanced CNC machine tools contain computer equipment and are sensitive to the surrounding environment. They must have a central air conditioning system in the factory. I just said
I’ve seen it, you don’t have this condition, you have to install it.”
After saying that, he wanted to record it again, but at this moment, the door of the factory had arrived. When his blue eyes saw the scene inside the factory, he immediately shouted: "Oh, God, what are you doing?
?”
Zhao Guodong followed the other person's gaze and immediately screamed in his heart, "Oh no, Qin Zhenhua is so impatient, he really does what he says!"