Zhao Guodong couldn't pass this on. If he had to pass it on, it would be Ma Panshan. However, Ma Panshan is probably still angry. Qin Zhenhua is too lazy to pay attention to him. With these equipments, he can do a big job.
It's time, there is no need to have any intersection with Ma Panshan.
Although Luo Ronggen went through the channels of the army, as long as the army said something, the news would spread among the related military-industrial enterprises, and it would naturally reach the ears of the superiors.
Now that this incident has spread, it is shaking everywhere, especially those companies that have obtained the machine tools. At this time, they are all fuming over the fact that the machine tools cannot be used. Seeing that the machine tools are in their own homes.
In the factory, however, the superiors just couldn't reach an agreement, and the Germans couldn't come.
Now, now it's good. There is a capable person from the No. 1 Machinery Factory, who can actually install the machine tool himself, and it is said that it is completely up to standard!
In an instant, their hearts were moved.
Dongye Province, Jinan City, Jinan Automobile Factory.
"We are here today for a short meeting." In the conference room, a white-haired factory director said to the people below. He is Wang Lishui, the director of Ji'nan Automobile Factory.
Ji'nan Automobile Factory belongs to the First Machinery Department, which is at the same level as the Fifth Machinery Department. They are not a military industrial unit. However, the advanced CNC machine tools purchased by the state are definitely not for the Fifth Machinery Department, but for the Fifth Machinery Department.
They are used in all domestic machining industries, and Ji'nan Automobile Factory has enough reasons to purchase advanced CNC machine tools.
Ji'nan Automobile Factory was originally just a car repair shop with a few hundred people. After liberation, there were only imitations of the Jiefang CA10B car in China, which was a medium-sized truck with a load of four tons. After this kind of truck was produced,
It has played an important role in the construction of the motherland. However, its gasoline engine has less than 100 horsepower. It will be unable to tow large artillery. If you want to use it to carry tanks, it is even more impossible.
The country needed a heavy-duty truck, at least eight tons. At that time, this glorious and arduous task was handed over to the Ji'nan Automobile Factory. At that time, they only had eight machine tools and no forging machinery and equipment.
After mounting the horse and hammering it by hand, they just completed the task assigned by the state and imitated Skoda's 706RT car. After going through many hardships, they built their Huanghe brand car!
This is a heavy-duty truck, a gift from Ji'nan Automobile Factory to the motherland. However, in the process of continuous production, the factory also realized the importance of production technology. They want to continue to develop better heavy-duty trucks.
Advanced processing methods are necessary.
The country is also in urgent need of heavy-duty trucks, so after various considerations, one of the CNC machine tools fell into the factory of Ji'nan Automobile Factory.
Considering various factors, the factory did not select very old masters, but selected a group of middle-aged backbones in their thirties, gearing up to operate these CNC machine tools.
However, after waiting for a long time, no Germans came to install it. At this time, they were all very anxious.
At this meeting, Wang Lishui was hopeful.
"We have carefully verified that the No. 1 Machinery Factory in Prairie City has indeed installed those machine tools and equipment. There are many capable people in their factory. I heard that these people who install and debug machine tools once went abroad for inspection together. At that time,
The German company MTU has shown its skills and has deep knowledge in CNC machine tools, so if we invite him over, we should be able to use it soon." Wang Lishui said to everyone: "However,
We also learned that the Germans on site were very dissatisfied and said that if they assembled it themselves, they would not provide warranty for the machine tool."
After speaking, Wang Lishui looked at everyone: "Now, let's express our opinions. Lao Wu, you go first."
Wu Shengli was in charge of technology at the Ji'nan Automobile Factory. It was Wu Shengli who led everyone to start technological innovation and strive to improve the quality of Huanghe brand cars. He was also an effective person among them. The CNC machine tools introduced this time were also
Only after his hard work did he get it.
As the veteran, technical backbone, and deputy director in charge of technology of the Ji'nan Automobile Factory, Wu Shengli had a very serious expression on his face at this time.
"From my personal point of view, I very much hope to invite such skilled people to help us install and debug CNC machine tools. In this way, the processing level of many of our car parts will be improved to a higher level, and the power will be improved."
The more powerful the car will be, the stronger it will be." Wu Shengli said: "However, if we consider the overall situation and lose the warranty because we do it ourselves, then if there is a problem in the end, we will have to bear the responsibility ourselves."
Now everyone is taking no action and is just waiting for the country to come forward to solve the problem. Then everyone does not have to bear any responsibility. However, we are faced with the problem that this batch of equipment cannot be used for a long time. If we do it ourselves, then all the responsibilities will definitely be borne by us.
It's your own.
Our own situation is different from that of the No. 1 Machinery Factory. They are said to have national key projects that cannot be delayed. But what about our own side? So far, we are still producing regular Huanghe brand cars. If we have these equipment, we can only increase production.
The pressure on one's own side is not great.
How to choose depends on everyone's vote.
What Wu Shengli said is also everyone's concern, but if he said it, it would be the same as if he didn't say it.
"I think, maybe we can make a compromise." At this moment, another subordinate spoke up, Guan Ping, the director of the metalworking workshop. He has always been good at finding methods. He is also a general under Wu Shengli and has a flexible mind.
After hearing him talk about the compromise, everyone suddenly became interested.
"any solution?"
"Now, we can first send our selected machine tool operators to the first machine factory to observe." Wu Shengli said: "In this way, we can master the operation of the machine tool in advance. When the superiors solve the problem of machine tool installation,
Can't we just start work directly? That's a CNC machine tool, so it's not easy to operate."
As soon as Wu Shengli said this, everyone else immediately applauded. Yes, this is the safest way. Reserve talents first!
"But is the No. 1 Machinery Factory willing? After all, we are not in the same system!"
The automobile industry belongs to the First Machinery Department, and the tank factory belongs to the Fifth Machinery Department. They are different departments. Moreover, they are said to be working on national key projects and have a high degree of confidentiality. So, let's go there, okay?
"It depends on Factory Director Wang. It is said that in the past, how many times did Factory Director Wang meet their Director Ma?" Guan Ping said: "Now, it is related to the practical interests of our factory, please ask Director Wang