Qin Zhenhua is very smart. As for what he said, Luo Ronggen wants to spread it and raise awareness in the whole factory. That is, to be a worker, you must not only do it, but also have a brain.
Now, facing this situation, Qin Zhenhua has his own considerations. If he can have a better choice, of course he can follow his ideas.
Of course, it must be in line with the actual situation. If the R&D room is asked to drive over the M48 tank and hand it over to the maintenance workshop for mapping and imitation, then they will absolutely refuse. This plan has no meaning. Now, what does Qin Zhenhua plan to do?
What about neutralization?
"I am only responsible for the imitation of one key component." Qin Zhenhua said with a smile: "They can't do it without me, so they can only agree to my request. Besides, it's just a key component, not the entire system.
Therefore, they won’t feel that I took away the credit.”
Zhao Guodong nodded and only copied one part. This was okay. After all, the maintenance workshop did not have the technical conditions. If everyone was mobilized to produce one part, it would still be possible.
In this way, it would be easy for Song Weize to explain. After all, it is just one part. If the entire project is successfully copied, they will definitely be the main contributors.
Negotiations between the two parties will be easier, and Qin Zhenhua will be prevented from being besieged in the R&D room. Besides, Qin Zhenhua is very skilled, and I really don't want to let him go.
"So, what are you planning to imitate?" Zhao Guodong asked.
"It's the hydraulic torque converter." Qin Zhenhua said: "The impeller inside has a special shape and can only be precision processed using CNC machine tools. They can't do without my hands."
Zhao Guodong nodded.
The transmission system, in addition to the torque converter, is the gearbox. The gearbox is a whole, and it is probably quite difficult to get there, so it is possible to take out the front torque converter.
"However, there is still a problem." Zhao Guodong said: "If the mapping and imitation fails in the end, and they put the responsibility for the failure on you, the torque converter, how should you deal with it?"
There are many reasons why the transmission system mapping and imitation failed. However, if Qin Zhenhua took out a separate part to map and imitate it, if it failed, people would probably blame themselves. Those people are also good at shirking responsibility.
.
After all, with Lao Qin leaving, many people in the R&D room left and went to the Tank Research Institute. These are the remaining people.
Qin Zhenhua's face showed a smile: "Of course I have a way, just ask Uncle Luo for a small favor. If you want to make me take the blame, there is no way. Don't think of blaming me for their mistakes. Of course, if they can do it
, that’s the best, after all, even if it’s something from twenty years ago, it’s something we can’t touch.”
Zhao Guodong nodded. Since Qin Zhenhua has countermeasures, just trust him. This young man has a smart mind. Look at when he has suffered losses since he came to the factory.
"If that's the case, I'm afraid your father's experimental data may not be available for the time being." Zhao Guodong said.
He knew what Qin Zhenhua wanted to do. It was not easy for Qin Zhenhua to give up his personal pursuits for this project.
Just as he finished speaking, Luo Ronggen's throat twitched and he said: "The army also kept a copy of the experimental data at that time. I can apply for access from the army."
"Uncle Luo, thank you." Qin Zhenhua felt a surge of gratitude from his heart. He knew that even if he entered the R&D room, the factory might not be able to let him have access to those materials. He was also determined, starting from the beginning.
From the beginning, he used this skill to compete in a competition to gain the limelight, and then set conditions so that the factory would have no way out and had no choice but to agree to it. He was also aware of the risks involved.
Now, it was of course the best thing to be able to get information from Luo Rongen. To study his father's accident, on the one hand, he had to study the tank that died in the explosion, and on the other hand, he also needed to find specific technical information.
After all, his father was definitely not a reckless person and must have been carefully calculated. Qin Zhenhua believed in his father, and now, he finally saw a glimmer of light.
"This is what I should do." Luo Ronggen sighed, obviously thinking of Qin Zhenhua's father: "Okay, don't say anything else, let's continue drinking! If you need any help in the future, just come to me."
Obviously, everyone had something on their minds, so when they drank, they did not control the amount. In the end, even Qin Zhenhua was drunk. In his drunken eyes, he seemed to see his father again, wearing a Chinese tunic suit and holding a
The briefcase, wearing black-framed glasses, that look will always be imprinted in his mind and cannot be erased.
The red leather notebook also seems to be emitting red light.
He didn't know how he got to the dormitory, but after arriving and washing his face several times, Qin Zhenhua opened his notebook and flipped to the page above. He was confident because of the contents of his father's notebook.
This page is about introducing the 122 tank.
Only the most knowledgeable people know about the 122 tank project. In 1970, the No. 1 Machinery Factory, the Research Institute and the Tank Force jointly developed the 122 tank prototype. The technical requirements of this prototype are very high. It adopts
It has advanced technologies and components such as advanced hydraulic transmission device, hydraulic control device and adjustable hydro-pneumatic suspension device, so this prototype is also called a "three-liquid" prototype.
In addition to these, there are many advanced technologies, such as 120mm smoothbore cannon, low-light night vision night sight device, composite armor, three-defense device and other new components. Unfortunately, almost everything is not up to par, especially the most basic ones.
The "three-liquid" technology suffered from frequent failures and was eventually discontinued after a short period of performance.
My father participated in the development at that time, and he also concluded that the biggest problem of failure was machining accuracy!
The country has inherited the Soviet system, which requires actual combat. The weapons are very rough, while Western technology is very sophisticated. Therefore, the failure of the three-liquid system built by our own country using this rough technology is almost certain.
Without CNC machine tool processing and high-precision CNC grinders, it would be impossible to process qualified parts.
You must master the processing technology and make a qualified hydraulic torque converter. After all, this is the first step to realize an automatic transmission!
The key is to write the program!
With Wang Xiaoqiang's advice to me, the general framework came out. The next period of time was about surveying and mapping models and making programs.
I don’t know if the CNC machine tool has been moved back. Qin Zhenhua really wanted to spread out the bedroll in the workshop and study it day and night.