It is what the ancients called [magic]. But it is only a particle, not an energy.
Photon is a neutral particle that is ubiquitous in multiple parallel universes and can express quantum transitions. It has extremely strong particle properties.
Photons can induce various physical phenomena. Photons can be converted into pure energy. Photons exist among the particles of matter and are part of matter. Photons have almost no mass.
In the universe, photons, energy, matter and space-time maintain a constant total amount and can be converted into each other, but the total amount of the four before and after conversion remains unchanged.
Photons can also be classified according to their properties into [free photons] and [intrinsic photons].
[Free photons] refer to photons that are ubiquitous in the world and can freely enter and exit the living body, but cannot be retained in the living body for a long time. Their structures are generally relatively simple.
[Intrinsic photons] are generally generated in epic-level organisms. They are generally formed by the aggregation of [free photons] and can stay in the organism for a long time. Whether a creature can independently produce [intrinsic photons] is the determining factor of whether a creature is an epic-level photon creature.
Standard. The process of splitting intrinsic photons into free photons can produce a large amount of energy, which is one of the reasons why epic creatures are so powerful.
1/02/02: Photons (2) – Applications of Photons
In the Pantorakon-Orim spacetime, there are generally two ways to utilize photons: photon mirrors and photon diversion.
1/02/02A: Applications of Photons (A): Photon Reflectors
This technology comes from a mineral called [Lightstone]. Lightstone has the property of reflecting photons in nature.
By refining the light stone, laying it flat on a flat surface, and turning on electricity, the light stone matrix can stably and continuously produce a reflection effect, continuously reflecting the photons from the matrix panel outwards, and continuously replenishing photons from other planes, ultimately forming a continuous
, photon flow perpendicular to the matrix panel.
It only requires power to maintain the flow of photons, and when the photons flow, they can generate propulsion in the opposite direction. Therefore, most of the early photon mirrors were used in the propulsion system of the spacecraft. The anti-gravity flight engine is in Pantorakan-Oli
Mu space-time has appeared in the very early history of space-time, but the power supply technology at that time was still backward, and the development of anti-gravity engines was hindered.
1/02/02A1: (A1) Application of photon mirror 1: Photon gun
Photon reflectors were applied to weapon systems in the Middle Ages. The initial photon weapons emitted photon streams through a large number of reflectors to create an effect like a beam cannon. However, at that time, photon compression technology, photon diversion technology and structural
The world shaping technology has not yet matured, and the power of the beam cannon is not ideal. At most, it can only roast the food.
With the development of modern technology, the photon flow can be compressed to a very lethal level. The emitted high-pressure photon flow can rub with the atmosphere within a certain distance and produce high-heat ionized matter, making the light gun a very deadly weapon.
However, if it exceeds the range, the photon stream will decay rapidly and its power will be greatly reduced.
However, there is a technical bottleneck in photon ammunition: due to the photon friction phenomenon (photon friction phenomenon) between the photons existing in the atmosphere and the emitted photon stream, the firing speed of the emitted photon stream is always limited to sixty-sixth of the speed of light.
1. No matter how high the compression law is and how energetic the photon flow is, it is impossible to exceed this shooting speed, because the higher the compression law and the higher the initial velocity, the more obvious the friction phenomenon suffered by the photon flow. Someone once thought of using
Barrier shaping technology first creates a photon vacuum area on the track of the photon flow to increase the rate of fire of the photon weapon. This is the concept of the so-called "rail gun". However, barrier shaping technology has not been widely used in long-distance applications.
A major breakthrough, rail guns have never been put into practical use.
1/02/02A2: (A2) Application of photon mirror 2: Photon shield and photon armor
After light bombs became a deadly long-range attack method, Barrier Formation provided the possibility to defend against light bombs: by surrounding the photon stream within a shield-shaped barrier, most light bombs could be easily defended.
Since the two high-density photon streams will produce mutual repulsion, the photon shield has a buffering effect on the light bullets, causing the light bullets fired at the user to bounce away or decay quickly, making them less lethal.
As a result, modern battles quickly became a technical conflict between photon guns and photon shields. In fact, in battle, it is impossible for both sides to use long-range weapons to cause large damage to the enemy at once, and they usually need to be whittled down first.
Only the opponent's photon shield can deliver a fatal blow to the opponent.
Photon armor is made by mixing lightstone as a raw material into the alloy of the armor. The armor that is constantly charged during combat can provide reliable protection for the user, but the armor will become "heavy" as photons are charged.
This is not a weight in quality, but a penalty in slowing down the user's movement due to the photon friction effect. The more photons charged into the photon armor, the better the protection performance, and the more obvious the deceleration will be.
If you just blindly increase defense, the wearer may be in a dilemma where he is completely unable to move and is at the mercy of others.
1/02/02A3: (A3) Application of photon mirror 3: Light blade
In view of the low efficiency of photon firearms in combat, some people have proposed the idea of combining the high-precision barrier forming technology developed in modern times to produce photon melee weapons: by limiting the photon flow within a fixed energy field (enchantment),
It can compress photons to a very terrifying level. The photon blade that continuously emits excess light within the barrier surrounded by high energy can easily cut off any material, and even high-energy photon shields will become vulnerable.
In an era when photon shields and photon firearms compete with each other technically, photon melee weapons have become the mainstream. Of course, the price of this powerful attack method is that it needs to be close to the opponent to be effective.
Through very rigorous training and high-level photon armor, Pendraken's knights have long been accustomed to this high-speed approach and one-hit kill tactics. They have even trained their mental reactions to the extreme to deal with oncoming enemies.
The light bullets can be easily dodged, or the light blades can be used to bounce the light bullets back. The Pendragon knights, who were rampaging in the hail of bullets, once made the entire European continent fearful, although that was already five centuries ago.
In fact, it is an extension of photon friction. The core of this effect is that when a group of highly concentrated photons (hereinafter referred to as photon flow A) moves in regular space, it will inevitably rub against free photons in the space, so the moving speed of A
It will definitely be slower.
The higher the concentration of A, the greater the friction and the faster the decay rate.
Therefore, even if you can create a powerful ultra-highly concentrated photon stream that can kill people, if it cannot be launched, or the range is extremely short and the projectile speed is extremely slow, it will have no practical significance.
The same goes for melee weapons such as light blades: even if they can gather ultra-high concentrations of photons to produce astonishing lethality, they cannot be used as weapons because of the buffering effect that prevents anyone from wielding them.
Similarly, photon shields and photon armor will also increase the photon buffering effect during the process of charging photons. Blindly trying to enhance the protective performance of the armor will only make the user unable to move in the end.
Regarding photon buffering, there is another very interesting phenomenon. Suppose there are two high-concentration photon streams A and B that are confined in two independent boundaries: When A and B intersect at a certain speed, because of mutual buffering
The action, as well as the friction effect of photons in the atmosphere, will eventually cause A and B to bounce off each other.
Simply put, when the light blades intersect, they will not pass through each other, but will bounce off each other (this process is very similar to the collision and rebound of physical swords), but the side with a relatively smaller photon concentration will receive a greater reaction force.
In the same principle, if a light blade strikes an armor that is filled with high concentrations of photons, it may be bounced away, so experienced warriors will generally choose the weaker part of the opponent's armor to attack.
1/02/02A5: (A5) Application of photons: Damage determination of photon weapons: Basic attributes
After the photon weapon hits the target, it actually causes a series of complex injuries.
(1) Cutting damage. It is generally manifested in melee weapons such as light blades. The high-speed flow of photons in the barrier is like individual saw blades, which can easily cut the surface of an object.
(2) Burn injury. The high-energy photon stream transfers energy while contacting the surface of the object, causing the target surface to melt at the molecular level, and then vaporize or plasma. The situation is like electric welding to weld the object. This injury is generally not high in protection when hit.
objects are clearly reflected.
(3) Impact damage. The target's defense is very high. When the composition of the object contains a large number of photons, the phenomenon of cutting and melting is not obvious. Instead, an impact damage is reflected due to the photon buffering effect. The situation is like a high-pressure water flow hitting a rock.
Same. Light bullets will generally be bounced away. If a melee weapon hits a thick armor, both sides will receive a certain degree of reaction force. The side with a smaller photon concentration in the weapon or armor will suffer a greater force. (For details, see
1/02/02A4: Photon buffering effect)
Since the impact force generated may penetrate the armor and cause local internal injuries to the opponent, there is also a strategy of using a large photon hammer to break armor, which has significant lethality against targets wearing heavy armor. However, the weight of the photon hammer is not within the arm strength of ordinary people.
Able to wave.
The three attributes of cutting, fusing and impact have become the basic attributes of photon weapons, and any photon weapon must have them. How each attribute is reflected depends on the opponent's protective equipment.
1/02/02A6: (A6) Application of photons: damage determination of photon weapons: additional attributes---"filter" and "enchantment"
In addition to the three basic attributes of slashing, melting and impact, a beam of photon flow used to attack can also have additional physical effects. These effects are generally achieved through two means, namely [filter] and [enchantment]
].
[Filter] is a device that is generally used on devices that purely output photon streams such as lightsabers. When the photons flow through the filter, they change the properties of some photons to produce a series of special physical phenomena such as high temperature/freezing/electric shock.
, this is somewhat similar to the process of magicians using magic.
Since the photon output of the weapon is constant, the filter is equivalent to sacrificing part of the lethality of the weapon itself to create special physical effects.
[Enchanting] is applied to older physical weapons to increase the performance of the weapon. For example, charging an iron sword with a large number of photons increases the sharpness and hardness of the iron sword. Similar to [Filter], [Enchanting]
Various special physical phenomena can also be produced, but the physical properties of the physical weapon itself limit the enchantment strength of the weapon. That is to say, it is impossible to attach an enchantment that the physical weapon cannot withstand. If a high-heat enchantment is attached but the sword body cannot withstand such
At high temperatures, the sword will immediately dissolve and become unusable.
There is also a problem with adding enchantments to physical weapons, that is, it will make the weapon [heavy]. Although the actual weight does not increase or decrease after charging with photons, the weapon will become heavier due to the photon buffering effect during the process of swinging the weapon.
It is heavy and difficult to swing. The more powerful the enchantment, the heavier the weapon becomes. Therefore, warriors who used physical swords in ancient times generally had amazing arm strength.
1/02/02B: Applications of Photons (B): Photon Diversion (Magic) Photoniduagic)
It has been passed down since ancient times to this day, using biological neural networks as conductors of photon flow and brain quantum waves as control catalysts to induce various physical phenomena.
1/02/02B1: (B1) Magic Summary 1: The Origin of Magic
"Magic" originated from a relatively superstitious saying in ancient times. Legend has it that the technology of controlling photons was granted to humans by demons. Nowadays, with the advancement of science, it is more believed that magic was taught to humans by alien visitors or visitors from other time and space. It is not ruled out that it is just the ancients.
Discovered by accident in practice.
Before the scientific community officially recognized the existence of photons, magic users were often arrested and burned to death in public as "witches" and "wizards". High-ranking people in various religions claimed to be able to use "miracles", but in the end, they were actually
It is also a variation of photon diversion, and is essentially the same as magic.
Of course, there are still many unsolvable secrets in magic. The ancients used magic entirely based on the accumulation of experience, but the principles that magic follows to induce physical phenomena can only be explained to a very small part so far. A more convincing statement
Yes, the quantum waves and photon flows in the brain of the caster cause a series of complex chain reactions, which ultimately partially distort some of the physical laws of the world and cause special physical phenomena. For example, the fireball spell distorts the ignition point of the catalyst.
Causes the catalyst to burn instantly. (To launch the fireball, you actually need to activate another "orbital acceleration" magic, but it is generally considered to be part of the fireball magic and is cast together)
1/02/02B2: (B2) Magic Summary 2: Advantages and Disadvantages of Magic
Unlike fixed-output photon weapons, magic has no upper limit on output. The magic user is just a channel, and the photon flow in space passes through the user's nerves to produce magic. Photons in nature are almost unlimited, so magic
The output is also unlimited. As long as a magician is willing to take the time to learn knowledge and prepare the necessary catalysts, he can cast powerful spells, such as the ultimate magic "nuclear fusion", which can instantly turn a city into a
Turned into ashes.
Although it is powerful, magic users will also suffer serious backlash: petrification.
The number of photons that the body of a living thing can receive in its lifetime is fixed. Photons enter the body of living things through eating and other means to maintain the life activities of living things. If photons are lacking, the body will be weak. If there are enough photons, the body will be strong. Most of the time, photons will
It stays in the body for a long time, then decays, leaves the body and returns to nature. The cycle of photons entering the body until returning to nature is called the biophoton cycle. The human cycle is about 2 weeks. The longer the cycle, the longer the life of the creature.
, otherwise it will age quickly.
Therefore, excessive photons entering the living body in a short period of time will accelerate the aging of cells. If a very large number of photons flow into the living body at once, it will even cause the biological cells to die quickly. Using magic, a huge amount of photons will flow into the body in a short period of time.
In the body of the surgeon, all the body cells of the surgeon will become necrotic and keratinized at a high speed. The body of the surgeon will immediately become as stiff as a stone and die in an instant.
Therefore, users of magic are often associated with death. No one knows whether they will be petrified after using the next magic. Even if it is used normally, the harm of magic to the human body still exists. People who use magic generally
Will age faster than normal people.
Therefore, magicians generally do not perform magic with their bare hands. Instead, they use very high-purity light stones as catalysts for magic, minimizing the flow of photons passing through the human body's neural network and minimizing the damage to the body caused by the magic.
few.
Of course, tools are not omnipotent. The higher the level of a magician, the more delicate they must be in their spells. The more delicately they control the flow of photons, the more damage they can cause to a minimum. But the damage will always be done.
It is inevitable, because the final stage of magic requires the resonance of photon flow and brain quantum waves. In any case, there will always be a part of photons flowing through the human body.
1/02/02B3: (B3) Magic Summary (3): Magic and Strategy
It is precisely because the damage to the body caused by the use of magic is inevitable. Whether a spell needs to be activated, when to activate it, and how to activate it to achieve the best effect have become the ultimate topics that magicians need to spend their entire lives studying.
The use of magic is simply a combination of skills and strategies. Only those who are truly wise can master its essence and survive for a long time. As the magicians in the ivory tower often say: "Know how to use magic."
The magician with the strongest magic is not necessarily the strongest. The magician who laughs till the end is truly the strongest."
Forbidden magic refers to those great magic that must not be used. Once used, the user will be petrified. Even in modern times, with such advanced equipment and perfect photon control technology, there are some magic that are harmful to the mortal body.
Said it was still impossible
The human body is like a water pipe. No matter how strong the design of the water pipe is or how good the drainage equipment is, it is impossible to let the water of an entire river flow through in a short time. If you insist on using forbidden techniques, it will be like
Smash the water pipe, let the water flow away without restraint, and let the collapsed river bank flood. The broken body only serves as the initial catalyst, and the insufficient part is borne by the chain reaction of photon flow in nature. The effect is of course
It is destructive. Therefore, forbidden spells, without exception, are all destructive spells and completely uncontrollable.
The three most well-known forbidden techniques: [Nuclear Fusion Technique], [Space-time Fission Technique] and [Mass Collapse Technique], all use the chain reaction of photons to create an out-of-control state of energy, space-time and matter, and their effects are all
It is destructive. Any improper control may create an artificial black hole and destroy the entire universe. It can be said to be an unforgivable forbidden technique that destroys the balance of the world. Such a dangerous forbidden technique is of course kept by the Supreme Council of the Ivory Tower. Only
Only a very small number of magic masters would know this. However, in order to check the Ivory Tower, the Parliament of Pantorakon once asked the heavenly knights of the Four Heavenly Knights to learn the three forbidden arts. For this reason, the forbidden arts were also used by the leader of the knights (
Knights of Heaven) passed down from generation to generation.
========================================
1/03: MIRACALES
All "magic" in the multi-parallel universe are induced by manipulating/changing the properties of photons. Because the total amount of mass, energy, space-time, and photons is constant, magic is just equivalent exchange and will exist in the world by itself.
The photons on it just change from one form to another.
The reason why a miracle is called a miracle is because it completely overturns the concept of equivalent exchange. It is not the mutual transformation of "being", but the transformation of "being" from "nothing" out of thin air.
The three known miracles, the first miracle [creation of space and time], the second miracle [creation of mass and energy], and the third miracle [creation of photons], all create space and time/mass energy/photons out of thin air from places that did not originally exist.
. Generally speaking, things created in this way will be immediately modified by the world and eventually disappear, but they are indeed things that were once created and did exist.
This kind of creation is actually very close to the realm of God. Whether a person can use [miracles] is something that is decided when the person is born. It is the person's [talent].
People without this kind of talent will not be able to achieve [miracles] no matter how much training they rely on.
A person with this kind of talent is considered to be "burdened with a huge destiny", so the world bestows "miracles" on him/her as a tool for him/her to change the world.
Similar to magic, the number of times a person can use [miracle] per day is limited. The actual number depends on the scale and nature of the miracle, and has nothing to do with the person's physique and level of cultivation. In other words, no matter how much you practice, you cannot
Change the number of times a person uses Miracle per day.