Chapter 6 If you can come back to life, you will be reborn in Nirvana

Phoenix Brand suddenly became popular because of an announcement of trading in old products for new ones.

Hu Lai had no idea that the people of Yan State were so enthusiastic about the Phoenix Card.

The live broadcast room loops through company introductions and event details that are rushing to be produced. Although no one is live broadcasting, there are hundreds of people in the live broadcast room all the time.

The day after the all-hands meeting, Han Ming successfully transformed the production line of "MQ-1 spray-coated polymer composite material". When the first batch of spray-coated materials was mass-produced and tested, Han Ming was completely shocked!

"I don't know where you got such powerful technology from!"

Han Ming was extremely excited. This spray-type polymer material has never been used in the bicycle field.

I used to only know that carbon fiber is a polymer material, but I didn’t expect that there are actually spray-type polymer materials!

He sprayed polymer composite materials on the disassembled 28-bar frame, and the high-carbon steel body formed a 0.5 mm high-strength composite material layer.

After waiting for the composite material to be completely finalized, a brand new 28-inch bumper was reassembled. Once tested, the strength of the car body was actually improved a lot!

Hu Lai proposed to try the maximum load capacity. Unexpectedly, when the tire was close to the limit of 900 catties, the 28-inch large bar could still drive stably.

The frame is strong enough to withstand a weight of 900 pounds!

If better tires are used, the maximum load capacity may be greater!

Not inferior to alloy steel at all!

Han Ming looked at the test results and felt even more excited.

The design of bicycle frames has always been about finding a balance between weight and strength.

In theory, the lighter the car, the easier it is to ride and the faster it goes.

However, reducing the weight of the body will also reduce the impact strength of the frame.

You can't have both. It's hard to find a balance.

All low-end urban commuter cars on the market are made of bulky high-carbon steel, so the weight of the vehicle body has been unable to be reduced.

The formation of polymer materials can completely solve this problem. After spraying with lightweight materials, not only can it be lightweight, but it can also maintain strength comparable to high-carbon steel!

Not only that, the most important thing is that spray-type polymer materials are also very cheap!

Hu Lai was also very excited, although he already knew the actual effect by checking the detailed information of the system.

However, when the real thing appeared in front of him and looked at the experimental data, he was still shocked by the black technology!

This is comparable to or even better than carbon fiber.

He couldn't help but wonder, if it was used on bicycle frames now, would it still have such a good effect if it were used on motorcycles or cars?

Before I had time to think about it, the frames of more than 80,000 28-inch large-bar vehicles in the warehouse still needed to be disassembled and spray-painted.

Nowadays, there are not enough manpower in the factory, so even Hu Lai rolls up his sleeves and starts working.

When everyone saw Hu Lai, they all worked harder and worked harder.

Everyone worked together, and it took only one day to finish painting all the 5,000 28-bar trucks that were going to be sent to the Chieftain's Mainland. They were then loaded directly into the trucks and sent to the port, where they lined up to board the ship.

Han Ming's production line was successfully started, and good news came from Jiangbeichuan within two days.

With the help of technical drawings, the research and development and transformation of the transmission system were successfully realized, basically meeting the indicators on the technical drawings!

Now that everything is ready, all that's missing is the frame.

The frame is the most important component of a bicycle and also the heaviest component.

It needs to withstand most of the impact strength during use. The mainstream ones used on the market are high carbon steel, chromium-molybdenum alloy steel, aluminum alloy, and carbon fiber.

Low-end bicycles basically use high-carbon steel due to cost control.

High carbon steel is heavier, so it is naturally more strenuous to ride and less sensitive to maneuver.

Especially when it comes to manually moving bicycles, it can be a bit difficult for women to move them.

Hu Lai had already had an idea in his mind, and he was going to use resin with lighter weight and better toughness.

Resin is cheap, but its only drawback is poor rigidity, but polymer composites can just make up for the lack of rigidity.

The resin model has been completed a long time ago, and now we are waiting for the experimental results after spraying the polymer material.

The spray-painted frame is assembled into a complete vehicle and pulled into the testing field.

After going through a complete strength test, everyone was shocked again!

"This polymer spray material is amazing! It's completely black technology."

"I doubt that using wood as a mold and spraying it with material can achieve such high strength!"

"Where did Mr. Hu get such awesome materials!"

Hu Lai finally breathed a sigh of relief when he saw the experimental data.

Sprayed with polymer composite resin, the overall strength is completely comparable to high-carbon steel, and even the rigidity is a little higher than high-carbon steel.

Tough material resin can also achieve such rigid strength, which is already very good.

The last big stone in his heart fell, and the next step was to go all out to produce new cars and prepare them for sale.

Hu Lai turned to Yi Yi and said, "Yi Yi, please contact the resin factory and ask them to make five thousand frames as soon as possible."

Then he said to Han Ming: "Director Han, please notify everyone in the engineering department to have a meeting in the conference room immediately to determine the matching of various parts of the new car."

After arranging his work, he went to the conference room first.

Everyone was very efficient. In less than ten minutes, three people from the factory director Han and the engineering department arrived in the conference room.

Hu Lai held the inventory data provided by Warehouse Lao Li in his hand. He handed it to Han Ming, and everyone circulated it.

After everyone had read it, Hu Lai was the first to break the deadlock.

"Now the factory only has the last 300,000 yuan in capital, so we can only match parts based on existing inventory."

Everyone knew the predicament of the factory, so there was no unnecessary nonsense and a few people started a heated discussion.

Han Ming discussed with three people from the engineering department for more than half an hour, and combined with the inventory data collected by Lao Liu, they finally collected 5,000 sets of complete vehicle parts.

Hu Lai watched everyone calculating all the 300,000 yuan, and couldn't help laughing: "Now there is really not a penny left in the company account."

"This is a last-ditch battle to see if we can rise from the ashes just like the name of the factory."

Han was obviously a little excited: "Yes, it can definitely be done."

Jiang Beichuan also said: "Boss, the new car has been finalized and it still lacks a name. Why don't you give it a name?"

Hu Lai thought about the company's current desperate situation, and two words suddenly popped into his mind: "Nirvana."

He thought for a while and said: "It was born in the desperate situation of the company. If it can be brought back to life, it will be Nirvana and rebirth."

"Let's call it 'Nirvana'."

"Nirvana?"

Everyone was in awe, the name really suited the occasion.

After deciding on the name of the new product, Li Li from the design department began to design a series of advertisements and posters.

All of a sudden, everyone in the factory was busy.

Within a few days, with the last step of painting completed, the first batch of ten real cars was finally displayed in front of everyone.

According to Hu Lai's idea, the actual car uses five colors.

Girly pink, blue, yellow, green, silver gray.

Except for the silver gray, they are all bright colors.

And girly pink has become the main color series this time.

Ten cars were parked quietly in the open space of the factory, and the employees in the factory formed a circle.

They deal with bicycles every day and have seen countless new bicycles, but they can't help but be amazed when they see these brightly colored bicycles.

"This girl's pink color is so cute. Uh, the grass green color is also good."

"Did the boss design this green color? Why do you feel so experienced!"

"Let me go...how can I control this pink color..."

"Silver gray paired with classic retro styles is really eye-catching. The designs from a few years ago still look as pleasing to the eye now!"

The sun shines on the paint surface, shining brightly.

Hu Lai boldly uses bright colors to add a youthful atmosphere to the retro models.
Chapter completed!