"Director An, I have completed the sixth-level fitter assessment. Can you give me the assessment items for the seventh-level fitter?"
Yi Chuanzong was smiling, his eyes slightly anxious.
Director An looked at him blankly for two seconds, then waved his hand, and a workshop director came over and handed a piece of beige paper to Yi Chuanzong's hand.
"Thanks."
After Yi Chuanzong took it over, he went to pick up the workpiece in a familiar way. By chance, a middle-aged man with a smile on his face walked up.
"Master Yi, how did you complete the assessment?"
The workpiece was completed well this time. He was in a good mood and spoke in a slightly teasing tone.
Yi Chuanzong forced a smile and said: "Master Le, the assessment project for the sixth-level fitter has been completed, and there are still seven-level ones behind it. Time is a bit tight, so I will talk to you when I have time."
After saying that, Yi Chuanzong left in a hurry.
Master Le stood slightly on the spot. At this time, he was completely confused. The project assessment for the sixth-level fitter was completed. Now he is going to receive the seventh-level?
He silently lowered his head and glanced at the 'U'-shaped workpiece in his hand. He was taking the Level 6 fitter assessment. Has the assessment been completed over there?
When we were chatting just now, didn't everyone say that this person came here to make up the numbers?
Is this assessment completed now?
It took two hours here, and it took them three days!
Are you kidding me?
Master Le shouted in his heart, 'Inside story! There is definitely an inside story!'
Feeling agitated, Master Le took several deep breaths and walked towards the testing site. He needed an explanation!
Even if he just passed the test, the leader also sent him a list of assessment items for level seven fitters. How is this possible?
Is the Third Rolling Mill so dark?
He's going to report it!
With an inexplicable mentality, Master Le walked to the inspection place. There were many master craftsmen here. It is usually best to find two eighth-level fitters when they are not busy, because these two represent credibility!
But for Master Le, he has only one choice, and that is Master Lu. This is an affirmation of his skills!
As for Yi Zhonghai, he just glanced at it inexplicably. Yi Chuanzong's words just now were still echoing in his heart. If there was an inside story, Master Yi would be involved!
"Master Lu, please help me inspect the workpiece."
Master Lu nodded and took it directly. He just measured the workpiece. This is his current job.
Yi Zhonghai lowered his head and drank tea. He always felt that when he was with his nephew, the way others looked at him often changed. Is this the difference between having children and not having children?
Why do you feel that the eyes of these people are often not so comfortable?
After a while, Master Lu also finished measuring the workpiece. He raised his head and said: "The dimensional accuracy is a bit precise. What we completed this time is relatively standard. We will continue to maintain it from now on."
Master Le breathed a sigh of relief and said with a smile: "Thank you, Master Lu."
Master Lu nodded and said, "Take the workpiece to register, and then go get the next assessment workpiece."
Master Le hesitated slightly, and then said: "Master Lu, did Yi Chuanzong pass the examination?"
He still didn't believe that a person could finish the work in two hours that took him three days.
Master Lu frowned slightly, questioning his fairness. He didn't explain much, but picked up a workpiece from the wooden board on the ground beside him and said, "Yes, I passed it to him. This is the workpiece he processed.
, you can measure it.”
Master Le was slightly startled, and asked him to measure it directly? After a slight hesitation, he still reached out and took it. He had done the same thing just now, and the measurement would not take long.
"Fake, right? Six microns?"
After the measurement, Master Le was shocked. He had seen how Yi Chuanzong worked. Even when he was working on the 'U'-shaped workpiece, he paid more attention, and his actions at that time were very rough.
Does this still have a dimensional accuracy of six microns?
Master Lu said calmly: "This one is six microns, and other workpieces are five microns. If you are interested, you can measure it."
Master Le's body was shaken and he took two steps back in disbelief.
They are all five microns... What does this mean? How could he not know that the test error of those eighth-level fitters is as close as possible to plus or minus five microns, and there is a certain failure rate.
The size of some workpieces can be relaxed, but as long as it reaches five microns, the designation is qualified.
After Master Lu finished speaking, he drank tea silently. He didn't want to say what Yi Chuanzong said.
What, you got distracted while working?
You can get through anything? You don’t care?
What, just grind it a little more.
After hearing this, he felt a little excited. They were testing it now. Didn't he say that those things would just affect other people's assessment status?
Master Le walked back a little lost. At this time, he had accepted the fact. Master Lu had measured it, so the director must have measured it too.
He really didn't expect that the tall man was really so awesome? He was indeed a well-known scholar. Rumors were not just rumors. Some things should not be taken at face value, nor could they just listen to what others said.
It’s been a busy morning.
Yi Chuanzong went to have a hasty lunch, and came back in the afternoon to pick up iron. He hurriedly and slowly completed the assessment project for the seventh-level fitter. He ate a lot at noon today.
This kind of high-frequency work makes even Yi Chuanzong a little tired. It's not that the workpiece is difficult to produce, nor that he is physically tired, but that it is complicated and fast. The work that was originally completed slowly speeds up, and then speeds up again, and his heart feels a little tired.
.
If he does this often, he will definitely not be able to hold on for a few days.
"Master Lu, this is a piece for a seventh-level fitter. You can't take it all at once. There are a few more over there. I'll go back again."
Master Lu's hand holding the big bowl of teacup shook and he nodded with difficulty.
This is no longer a good person!
A level 5 fitter worked for three days, a level 6 fitter worked for three days, but this guy was squeezed into one morning.
Such an efficient and precise working state puts a lot of pressure on his senior!
Master Lu couldn't help but think, 'If I work faster, can I at least do it faster?'
Thinking of this, Master Lu quickly shook his head. The steps and methods of his work have been determined. Even if it is a simple job, it will not be much faster, and it is difficult to guarantee accuracy even if it is fast.
After another hurried measurement, Master Lu had a trace of sweat on his forehead. Sure enough, he was a little reluctant after picking up the speed, and the measurement just now almost went wrong.
"Okay, you passed this time, let's put the workpiece here."
Yi Chuanzong smiled and nodded, not having to register would save a lot of time.
"Thank you, Master Lu."
Master Lu just waved his hand, pretending to be calm, picked up the tea cup and took a sip.
At this moment, he felt a little panicked. If this boy really passed the eighth-level fitter examination, even if he didn't have that level, the work they did would be similar.
At that time, it will be clear who is strong and who is weak. If this person maintains this kind of work efficiency, doesn't it mean that they are lazy?
Originally, I worked diligently and wholeheartedly, and confidently received a high salary. I always stood tall in front of others, and everyone's work efficiency was about the same.
Suddenly a young man comes here, his work efficiency is several times that of theirs, and he earns the same salary as them, which makes me feel very embarrassed.
Master Lu smiled bitterly and turned to look at Yi Zhonghai, who was still drinking tea calmly, as if everything was under control.
"Master Yi, it's so hard for you to hide this from me!"
Yi Zhonghai replied with a smile on his face: "I told you before, do you believe it?"
Although he was smiling, there was a bit of bitterness in the smile. He was indeed the first to know about this, but he was also the first to bear the blow. This brat dared to slap the table with him!
Seeing the young couple getting married, he didn't feel the joy of his old father a few days later, and he hadn't even hugged his grandson yet. As a result, his status as the head of the family was challenged. He wondered if he was already old at the age of forty-six?
Master Lu could only nod heavily, and the two of them were speechless again.
Yi Chuanzong had already stepped onto the high platform. Before he could say a word to the leader, Director An waved his hand in the distance, and a workshop director hurriedly ran over and handed an assessment task list to him.
On hand.
"Your workpiece has been prepared for you, you can go and check it for acceptance."
Yi Chuanzong was startled and replied: "Thank you."
Standing halfway on the platform, Yi Chuanzong looked at the leadership seat just a few steps away. He still felt that it would be better to say hello to people, after all, they were already here.
"Director An, my seventh-level fitter project has been completed. I think the work behind the eighth-level fitter is a bit difficult. When will our test end today? I'll control the time."
The leaders around me felt a sense of indifference. They all remained silent and silent, and no one looked in this direction.
Even if they don't understand this very well, they still know that this person is awesome.
When their skills reach this level, not to mention they are just small leaders, even big leaders cannot be professional in front of such people, and they feel somewhat inferior to others.
Of course they didn't like this feeling, so it was better not to say anything and pretend not to see it.
Director An was also a bit frightened now. He pondered slightly, and then said: "According to the current test progress, the assessment of the eighth-level fitter will end with the last test. The test will end at five o'clock when work ends.
If you are short of time, you can choose to finish the later ones first, as the workpieces completed in the front are enough."
There are two days until the Spring Equinox, when the sky has no sides yet, the working hours are from 8 to 12 in the morning, from 1 to 5 in the afternoon, and will be adjusted back by half an hour later.
With Yi Chuanzong's current skills, he deserves special treatment for special matters and a slight relaxation, so that others can't gossip.
Yi Chuanzong nodded seriously, "Thank you, Director An, I will consider it as appropriate."
That is to say, but the sixth and seventh levels have been successfully completed. If you want to be promoted perfectly, it is better to complete all the assessment items of the eighth-level fitter. Otherwise, how can you leave one or two empty and let others complete them satisfactorily?
look?
Others don't care how long it took this person to finish the job. Others will only see his youth and cannot give others a reason to gossip.
After getting the workpiece to the work station, Yi Chuanzong first inspected it for a while. He had been tricked once before and was careful not to make any big mistakes. Otherwise, if the ship capsized in the last step, all the previous efforts would be wasted.
However, after the inspection, the workpieces were all qualified. Director Li's authority is so great. Not only are many peers watching at this moment, he is not the organizer yet, so naturally he is honest and can't do anything.
After briefly reading the title, Yi Chuanzong frowned.
Sure enough, the assessment items for the eighth-level fitter were difficult. Each lathe spindle box has a rotating shaft. If I asked an old man to do this, I couldn't do a few in an afternoon, and it was easy to make mistakes. I only gave him three.
If you fail three times, you fail.
Taking a deep breath, Yi Chuanzong adjusted his posture and started working quickly. It was difficult, but he said it was acceptable, but he was too tight on time and he had to cheer up!
Time passed slowly, and after another three hours of work, Yi Chuanzong's assessment was coming to an end.
At this time, he looked at the two silver-white curved iron pieces of one hundred square centimeters on the workbench with a confused expression.
To be precise, it is titanium alloy. Titanium alloy has high strength, good corrosion resistance, and high heat resistance. It is a very excellent metal, but the above three points also mean that its processing difficulty is astonishingly high.
As for the dimensional accuracy of this assessment, the error requirement is plus or minus four microns!
"The eighth-level fitter technical assessment is indeed difficult! This should be a mechanical lining. Is it a part of an aerospace engine? It shouldn't require such high precision, right?"
"Forget it, don't worry, let's get started."
Even Yi Chuanzong had to work hard to complete the processing of this kind of metal workpiece.
In fact, he had a doubt in his mind. This kind of assessment question, let alone an assessment, even if his uncle came to do it, if he was unlucky, he might not be able to do it in ten days and a half.
If this is really the assessment, I am afraid that the eighth-level fitter assessment does not depend on skills, but on luck.
However, this is difficult for him to return to, but it is still within the tolerance range. He once completed a workpiece with all his strength, and its dimensional accuracy reached plus one micron. Of course, it may be a little more, but the most accurate measuring tool he has at hand is
One micron.
In the end, the workpiece was scrapped. He had done it himself. The precision was too frightening. Qianlong should not use it. It was not the time for him to show off yet.
He has roughly understood the significance of this assessment. It is not that you have to meet the standard to pass. Failure to meet the standard is one thing. The accuracy of passing the assessment is the standard of the question maker.
What he was most worried about at this time was that if the workpiece was qualified this time, he would try to stabilize the error at plus or minus five microns, no more and no less. If it was too standard, he would have to do it again.
Yi Chuanzong, who was concentrating on his work, did not realize that Director An was already standing behind him, and also heard his muttering.
‘Aero engine lining? Probably not. The factory has some tasks for aero engines, and the size and accuracy requirements are not correct. It seems that this batch of pieces was personally arranged by the factory director?'
Director An thought for a moment and felt a shiver in his heart. He felt as if he had discovered something. Is this really an ordinary assessment?
After thinking for a long time, Director An came back to his senses and looked at the strong man in front of him who was working hard. He couldn't help being shocked. Each of the three tests took three days to complete, and now this man finished it in one afternoon.
.
Although other masters were delayed a lot of time by other things during the assessment, their speed was more than four times that of others. With such a physique, it was really an advantage.
"Ding, the system randomly selects, this time it is a triple critical hit. Based on your current grinding behavior, your fitter skill level is 3."
"Ding, a warm reminder from the system: Your fitter skills have been upgraded. This skill is a technique item. In the early stage, it will be upgraded to a manual operation of partial control. In the later stage, your understanding of the rules and principles of techniques will be improved."
"ps: There is no distinction between strong and weak for each pinnacle skill. The basic level is 100, the intermediate level is 200, and the advanced level is 400. Your junior fitter is upgraded to 10 points for the first time, and your advanced fitter (full) has been updated to junior engineer 1/
90."
Yi Chuanzong also stopped at this time, not because he heard the system's upgrade sound, but because the workpiece had been completed.
When his handicraft skills were fully upgraded, his control over his own skills seemed to have entered into a new and wonderful feeling. Before, he knew everything in his mind and in his hands.
Now it is more like an instinctive and subconscious control. It is an inexplicable sense of self-confidence. It is a refreshing feeling of control! The whole person is full of this kind of free mood, as if a string in the heart is being pulled.
opened!
Without testing, he felt that the workpiece error this time was plus or minus five microns. This is control!
Of course, it's only at the micron level. He has no idea of the next nanometer. One thousand microns is equal to one millimeter, and one thousand nanometers is equal to one micron. He doesn't have many decimal places after five microns.
He quickly completed another workpiece. This time, he finished it much more easily and contentedly, but he felt a little sad. He didn't need to use his brain to do the work, so why focus on it? How to improve his skills in the future?