Bringing the workpiece to Master Lu, Yi Chuanzong put the workpiece on the table with a dull expression.
"Master Lu, help me test this titanium alloy steel piece. I didn't finish it very well."
Master Lu didn't want to see this man at first. Why is his uncle always looking for him when he is here?
But after listening to Yi Chuanzong's words, his eyes suddenly lit up, "Isn't the completion very ideal?"
Test this first!
"Well, just wait."
Yi Chuanzong nodded.
"You've finished it again. How are the last two titanium alloy steel pieces done?"
Yi Chuanzong turned around and saw that it was Director An.
"The finished product did not meet the requirements, with only a dimensional accuracy of plus or minus five microns."
Director An was slightly startled. In fact, this was considered qualified, because the factory director separately told him that the qualified accuracy was an error of plus or minus five microns.
If it can be completed, Director Yang didn't say anything, but his look seemed a bit serious.
Master Lu also raised his head at this moment, his face was a little distorted. Wasn't this done ideally?
It's not like he has never done this kind of titanium alloy steel sheet before. It would be good to be able to guarantee an error of plus or minus six or seven microns. Five microns would be a bit lucky.
This is not done satisfactorily, but you still want to directly give him a pass? Plus or minus four microns, do you want to directly give him the title of ‘Level 10 Fitter’?
After some measurements, Master Lu said coldly: "It's all a dimensional error of five microns."
Yi Chuanzong was not surprised, turned around and asked: "Director An, have I finished the test now?"
Director An was silent for a while.
This assessment lasted for three days, and the assessment levels in this workshop were levels 6, 7, and 8. This person did it all in one day!
If he hadn't seen it with his own eyes and had confirmed it many times before, if he heard this kind of news, he might think that someone was working together to deceive him!
Today, except for one workpiece with a slightly larger error of six microns, the rest are all five microns without failure... This is outrageous!
If there were no mistakes, this would be too much!
Did the factory director already know what this man was capable of? It didn’t look like that back then!
If Director Yang comes tomorrow and reports this matter, what will be the reaction there?
Just thinking about it, Director An's expression became even weirder.
"Let's do this. Take your workpieces to the director of the technical department and let him measure them in front of everyone. After recording the results, you can wait for Master Yi and Master Lu to help.
Measuring is fine too.”
After thinking about it for a while, Director An decided to let everyone take a look at the finished workpieces. This is no joke. If something goes wrong, he can't handle it alone.
He is responsible for the testing project here. If there are no problems, it is a credit. No matter what the credit is, he will have to share the credit. Risks must be avoided.
Of course Yi Chuanzong would not refuse, "Okay, I will send it to Director Qu now."
After speaking, he directly moved the wooden shelf on the ground next to him, and placed all the parts he processed on it, so that he could take it all at once to save him from running back and forth.
Holding the center with one hand, Yi Chuanzong walked towards the platform as if serving food.
Seeing this person leave, Director An breathed a sigh of relief, and his tone was somewhat reproachful, "Master Yi, your nephew has this skill, you don't know it, right? You said it in advance, you really gave us
a surprise."
Yi Zhonghai smiled warmly, "He has strong opinions and doesn't like others to arrange things for him."
In fact, he was a little depressed two days ago, after all, I had just slapped the table with him.
As the technical examination approached, Yi Chuanzong was a little confused. The first uncle arranged for him to chop firewood, and the man finished the job just like he was playing.
There is no effective way to punish him, so he has been putting it aside. Now he doesn't dare to let his mother nag him, because he is the one who will bear the brunt of it.
Yi Chuanzong walked to the top of the platform, where it slowly became quiet.
"Director Qu, please take the test again to make sure there are no errors in the measurement."
Director Qu, who had a slightly dark complexion, had a slightly rosy complexion. He had previously said that people were cheating and cheating, but now a pile of workpieces were placed here. The crushing brought about by the technical level made him even more ashamed and panicked.
"Just leave it alone. Director An is in charge today. I'll wait for Director An to come back and test it for you."
"Hey, thank you."
Yi Chuanzong placed all the workpieces on the wooden board of the platform, and then lazily walked towards the first man.
When approaching a table, Yi Chuanzong turned around and smiled. Director Li looked at him expressionlessly and didn't know what he was thinking.
Of course, Yi Chuanzong would not laugh at a leader in front of so many people, but it was just that the fire could not be suppressed. Do you really dare to bully anyone? If you dare to steal other people's things and operate behind the scenes, you will have to be liquidated sooner or later.
Back to the uncle again.
"Director An, Director Qu asked you to go back and take the test again."
"Okay, you can move a chair from the side and sit on it."
"OK."
Yi Chuanzong casually took the gray-black high stool from the side and sat next to the uncle, "Uncle, is there still water in your tea cup? Do you want to pour some?"
The first man waved his hand and said, "No, I've had enough drinks in the afternoon. It's time to go back to eat when the finishing touches are over."
Yi Chuanzong sat lazily. After a while, a middle-aged man came over with the workpiece, "Master Yi, help me test it."
Yi Chuanzong directly reached out and took it, "I'll help you test it."
The middle-aged man's eyes were slightly surprised. He didn't think Yi Chuanzong's measurement had any credibility, but he didn't care. He had already measured it before coming here and it was successful. He was not afraid of others taking more measurements.
"Master Xiao Yi, how far has your test gone?"
Yi Chuanzong casually measured it a few times with tools, and replied: "After finishing the process, the dimensional accuracy of your workpiece is 0.9 wires, which is considered qualified. However, you used a little too much force. There is something wrong with your technique, and the error is not even enough.
If you want to improve your skills, you have to be careful and register."
The middle-aged man's expression was startled. He was a little dazed until there was an additional workpiece in his hand. Was he being educated? Was he being guided?
He frowned and looked at Yi Zhonghai, "Master Yi, why don't you measure it?"
The first man shook his head slightly and said softly: "Director An arranged the work for him, and his measurement results are valid. If Master Kang is not at ease, you can ask Master Lu to measure it again for you."
Such an attitude!
Master Kang was a little unhappy. He was preached to by a young man. He took the test for a long time and finished the test? He was afraid that he would be eliminated directly! What qualifications did he have to criticize him!
He walked to Master Lu angrily, with a smile on his face, "Master Lu, please help me measure it."
The main reason is that I am afraid that such registration will be invalid. After all, who will recognize the measurement results of a young person?
Master Lu raised his eyes and looked at Master Kang, then took the workpiece over and began to measure it seriously.
He had already listened to what Yi Chuanzong said. Naturally, he would not admit defeat at this time. He could do it faster than anyone else. If he could not even measure as well as others, it would be a big blow to the self-confidence of a master who was approaching old age. He must measure well!
Master Kang's expression became much calmer. As long as he succeeded in the assessment today, everything else would be considered a good thing. He was just an ignorant, so-called young man. Yelang arrogantly said a few nonsense words and let him go. There was no need to offend the master of the factory.
But he didn't see that Master Lu's face had become more and more solemn.
After repeated measurements several times, Master Lu said coldly: "The maximum workpiece error is 1.1 wires, and the plus and minus values of the error are greater than ten. There is something wrong with your operating methods and the workpiece is unqualified. You can register now."
Master Kang was dumbfounded when he heard this. After he woke up the next second, he defended anxiously: "Master Lu, you didn't measure wrong, did you? What I measured below was qualified. This Master Xiao Yi
It’s also qualified.”
Yi Chuanzong added lazily, "As the position of the application workpiece error is acceptable, it is considered qualified. It must be judged according to the measurement. Strictly speaking, it is indeed unqualified. You can avoid it if you pay attention to it later. If you do not correct it, you will not be able to correct the other part."
For various workpieces, there may be a phenomenon of being qualified but not qualified, which will increase the chance of machine failure. It is definitely correct to say that it is unqualified."
Master Lu raised his eyebrows. This guy is awesome. He has more abilities than he thought. As a senior, he feels a lot of pressure!
Master Kang opened his mouth wide, there is still something like this!
It turned out that I wanted to let him go. As long as I pay attention and change it, everything will be fine. This person seems to be a bit powerful!
His face was extremely troubled, and his voice was a little aggrieved, "Master Lu, I am considered qualified for this job."
Master Lu grinned with a fierce look on his face, "Anyone who passes by me will pass, and if he fails, he will fail. I won't recognize you if you pass. Just wait until next year and practice hard for a year. If your skills are not up to standard, what do you think?"
How can promotion be such a good thing? What is your job?"
Master Kong took the workpiece as if he was discouraged. If Master Lu gave it an unqualified one, it would be useless if someone else gave it a qualified one.
At the end of the day, this is the last test. It's just a year away, and I could have passed it before.
He asked with some annoyance: "Master Xiao Yi, why are you in charge of testing here?"
Master Lu said calmly: "Because he has completed all the items for the sixth, seventh, and eighth level fitter assessment, he was assigned here to be responsible for auxiliary measurements."
Master Kang looked shocked and shouted, "Six, seven, eight?" How many workpieces were that?
Master Lu nodded calmly, "The maximum error for one workpiece is six microns, and all other workpieces are five microns. Now the third measurement is being carried out by the director, and you can definitely measure it."
Master Kang swallowed hard and looked at Yi Chuanzong as if he were a ghost.
After standing still for a few seconds, he walked towards the recording place next to him in despair.
At this time, his heart was full of annoyance. If he came directly after the first test, would he have passed the examination now?
A level 6 fitter earns 72.3 yuan a month, a level 5 fitter earns 61.7 yuan a month, a difference of 10 yuan a month and 60 cents a month, a difference of 127.2 yuan a year, and an extra two months.
Wage, now the effort of a few sentences is gone.
"Be more strict when testing in the future. There is nothing wrong with fairness." The first man warned.
Yi Chuanzong nodded slightly, "I thought it was the first time I was responsible for measuring. If this person can persist until now, it will be fine if he corrects a small problem. He has to be strict."
"Hey, the first person who passed through my hands didn't pass the test. This is the end. If it's me, it will take two days to recover."
The old man was so angry that he "put it on me", and now he is gloating about his misfortune. This is "putting it on others".
Master Lu said doubtfully: "Master Xiao Yi, how did you measure just now? I saw that you just measured it briefly. How did you know that this person's technique was wrong? And you didn't measure the edge position, how did you know the error there?
bigger?"
"this……"
The expression on Yi Chuanzong's face was slightly embarrassed. How could he know?
Of course it was touched. With his touch, he could feel out the roughness and undulations with a simple touch. This was a bit mysterious, after all, others couldn't feel the pulse.
As for how he knew that this person's operating techniques were wrong, of course he had tried it all. His daily work was a bit boring, so in order to increase the difficulty, he would do it in a mess, and then repair it bit by bit.
It was just a boring thing at first, but I didn't expect that I finally found the most suitable way of working for me, and also increased my collection of wrong questions.
When he solves problems now, he can correct them with his touch, and even make production easier if he makes mistakes at some point.
"If it's not convenient to say it, forget it."
When Master Lu saw him like this, he stopped asking. He thought to himself that this might be his unique skill.
Seeing that his uncle was a little curious, Yi Chuanzong could only explain: "Don't I have three apprentices? When I corrected their movements, I observed the workpieces they processed. In order to teach them more accurately, I thought about it.
What kind of mistakes will cause what kind of situations, and I have studied it for a period of time. Master Kong’s mistakes this time are more obvious, so I can make a quick judgment."
Master Lu was slightly startled. Good guy, this young man has his own way. They are all thinking about how to make their work more standardized. What are the circumstances under which mistakes will occur? It sounds very powerful, but
Is it worth investing a lot of energy and time?
After regaining consciousness for a moment, Master Lu looked at Yi Chuanzong's plump face, his eyes a little dazed.
Ever since he recognized Yi Chuanzong's skills, he would unconsciously put them on the same level and habitually raise his age.
This person is so young and has only been in the factory for half a year. How could he spend so much energy and time?
Geniuses have more time than others?
The expression on Master Lu's face was very tangled. Maybe the process of thinking and doing was the same, but the proportion of gains was completely different. He suddenly felt a little unconfident.
Later, Yi Chuanzong began to take advantage of the situation, because the large surveying force had already arrived, and his presence here would affect the progress of the survey...
All measurements were completed and the results were recorded. The workers were waiting quietly below, while Director An stood on the stage with three lists in his hand.
"Now, the three-day technical test has been officially completed. I believe everyone is waiting for the results. However, the number of places for promotion and upgrading in the factory is limited. The factory needs to rank and select the most skilled workers for upgrading. I will make an announcement now.
Assessment situation.”
"One person passed the eighth-level fitter assessment this time. I believe everyone knows who it is. Master Yi Chuanzong and Master Xiao Yi. All workpieces are qualified. If anyone questions, they can be measured."
The workers looked at Yi Chuanzong as if they had seen a ghost. This man came here so early in the morning, and he had caused a lot of commotion ever since.
It was originally meant to be a fun watch, and it could also relieve the nervousness of the test.
As a result, the person behind them tormented them all day, making a lot of noises.
I took the Level 3 exam the next day, and finally passed the Level 8 fitter assessment... It was just like listening to a story. In the end, the man sat on the measuring chair, and everyone was noisy about measuring again. Naturally, the results were all passed, so that
The people who didn't believe it became quiet.
"Master Nan and Master Ning lack experience in processing titanium alloys and need to continue to hone their skills in this area."
The faces of the two masters below were much calmer. They rarely come into contact with titanium alloys on weekdays. This time the requirements were too strict. They had tried their best, but they could only achieve an error of plus or minus seven microns.
"Forty-two people participated in the seventh-level fitter assessment..."