I learned from my father that His Majesty Li Er urged him to quickly take up his post in the Ordnance Supervision, and at the same time he could not let go of his work in the Water Department.
Speaking of the Water Department, the Fang family's work is still very effective. That's why His Majesty Li Er transferred him to the Ordnance Supervisor and did not let him step down as usual. Of course, it may be that His Majesty Li Er cares more about new sea ships.
A trial production, or simply a prank by His Majesty Li Er, can't you kid do it? Then I will put more burden on you and exhaust you to death...
The Fang family's waterwheels were sent to all prefectures and counties across the country along with the drawings issued by the Ministry of Industry. Wherever conditions permit, several of them were erected for irrigation purposes.
Especially the Guanzhong area!
Since the beginning of spring, not a drop of rain has fallen in Guanzhong, and a severe drought has become a problem. Many areas cannot sow normally, and it is a foregone conclusion that the grain harvest will be reduced or even eliminated! The officials of Sinong Temple were worried. Fortunately, in the early Tang Dynasty,
Inherited a large number of Sui Dynasty righteous warehouses and stored a large amount of Sui Dynasty surplus grain, which will not lead to a food crisis.
At this moment, Fang Jun's waterwheel finally came into play!
Guanzhong in the Tang Dynasty was known as the 800-mile Qinchuan River and the "eight rivers surrounding Chang'an". It had extremely rich water conservancy resources and was well suited to the popularization of waterwheels.
Waterwheels stand tall in the rivers, and the clear river water continuously flows into the dry world through the ditches, finally resolving the crisis of severe drought.
However, Fang Jun doesn’t want to go to work just yet. The iron-making furnace is just a rough one. Everything is kept simple and fast, and he strives to determine the new method of iron-making as soon as possible...
Frying iron stoves began to become popular. In fact, in the Ming Dynasty, manual stirring was used. There was always a strong man beside the stove, holding a thick wrought iron rod and stirring it back and forth...
Fang Jun, who was deeply influenced by the industrial age, obviously would not let craftsmen do such work that seriously damaged health and was extremely inefficient. He made a bracket on the top of the stove, with a large round roller hanging in the middle, and three rollers underneath.
The wrought iron rods stretched diagonally towards the hearth, and the water wheel still provided power, so there was mechanized iron frying equipment.
It has to be said that the waterwheel has become a panacea in Fang Jun's hands. It can be used wherever it is needed... However, the components of the waterwheel are still made of wood, and the damage rate is too high. When suitable steel is refined and made of steel
Gears and bearings, the effect will be greatly improved.
Industrial development is a mutually reinforcing thing.
But currently, there is still a long way to go...
In the past, pig iron was cooled into ingots and then heated to make mature iron; but now this technology is to directly fry the molten pig iron from the blast furnace into mature iron. This method originally did not appear until the Ming Dynasty. Song Yingxing wrote in "Tiangong Kai"
It is recorded in "Things". Of course, everything relies on a few basic principles, and all steps are completely dependent on Fang Jun, who himself does not know...
Wrought iron can be directly used to make agricultural tools such as hoes and shovels. Of course, the production process requires forging, carburizing and quenching. Wrought iron is soft, has strong forgeability and has excellent processing performance.
When it comes to forging, I have to mention an artifact that is both super-era technology and easy to operate—a hydraulic forging hammer!
The principle of this thing is so simple that even a primary school student who has studied a little bit of physics can make it. But what Fang Jun can't understand is why ancient people could invent water-operated machines that convert water energy into mechanical energy, such as water drains and water mills.
Waiting for mechanical tools, but could not invent the hydraulic forging hammer?
Fang Jun also directed the craftsmen to build a forge. The basic structure of this thing is no different from the blacksmith shop where all rural blacksmiths repair hoes, shovels and other farm tools. It needs to be enlarged and thickened to forge large iron.
parts, thickened for thermal insulation.
There is a hydraulic forging hammer next to each forging furnace. Under the forging hammer is a thick anvil, with thick oak wood piers padded under the anvil. Below that is a concrete base cast by cement and stone, with multi-layer composite stress
The structure can withstand the huge impact of a falling forging hammer.
The forging hammer weighs two hundred and fifty kilograms, has a stroke of three feet, and the hammer falls thirty times per minute. This is only for experimental purposes. Smaller forging hammers with faster falling weights can be made as needed. Large forging hammers are used for roughening.
For processing, the small forging hammer is for finishing - in fact, it is not much more precise. After all, it is still a hammer. In the final analysis, the processing technology of the hydraulic forging hammer is essentially the same as the hammering of the blacksmiths.
Wang Xiaoer, the chief blacksmith of the Fang family, looked confused. His ancestors had never made iron like this...
The graphite in the mine was put to great use. The Fang family ordered craftsmen to first crush the graphite, add water and sieve it into fine mud, then hand-shape it on a rapidly rotating wooden plate like a porcelain body, and finally put it in a special high-temperature kiln.
After ten hours of medium firing, the graphite crucible is freshly baked.
The refining of wrought iron has been around for a long time, and Fang Jun's method cannot improve the quality. It can only reduce the cost to the greatest extent and greatly increase the output.
The greatest value lies in steel!
In ancient times, steelmaking mainly consisted of three processes: steel frying, steel making, and steel pouring.
Frying steel is actually frying iron, which can be produced in a frying furnace, but what is fried is mainly wrought iron, and a small amount of medium and low carbon steel, and the quality is very unstable.
Steelmaking uses fried steel as raw material, which is heated and then repeatedly folded and forged, or it is obtained by repeatedly stacking and forging several raw materials with different compositions. The process is complex and costly, and is only suitable for making swords and swords. Of course, with the hydraulic forging hammer, Baidu can
The difficulty of the steelmaking process was immediately reduced by several levels. After all, the most difficult part of steelmaking is repeated folding and forging. The hydraulic forging hammer bangs and bangs. How much faster than human power?
The method of pouring steel is recorded in "Mengxi Bi Tan": "In the world, the so-called steel is made of soft iron, which is made of pig iron and sealed with mud.
Filling with steel.”
These three processes are not suitable for large-scale industrial production.
What Fang Jun wants to refine is crucible steel.
Since the invention of the crucible steel-making method in the Spring and Autumn Period, it became most prosperous in the Han Dynasty. The steel produced by it was used to make strong fish scale armor and sharp ring-headed swords, and the invincible Han army was able to conquer the Huns.
The glorious victory from the Mongolian Plateau to Europe gave rise to the great reputation of "Those who offend the Han will be punished no matter how far away"!
Perhaps it was due to the war between Wuhu and China, or perhaps for some other inexplicable reason. The crucible method was lost during the Northern and Southern Dynasties. Instead, the crucible method blossomed inside and outside the wall, and developed in India. The wootz steel refined by Asan using this method,
The Damascus Saber was so sharp that it cut off the heads of countless Crusaders.
Of course, it may be because the quality of iron ore in India is relatively good...
The crucible method has been used in human society for more than two thousand years. It was not until the mid-to-late 19th century that it was gradually replaced by the new open-hearth steelmaking method. However, the converters and electric furnaces that emerged in the 20th century can be regarded as variants of the crucible method. The crucible method was used in
Two thousand years later it has been reborn.
Blast furnace, waterwheel, iron furnace, hydraulic forging hammer...
Fang Jun looked at all this, a surge of pride rushed into his heart!
If the experiment is successful, then the powerful soldiers of the Tang Dynasty will be equipped with sharp weapons that are hundreds of years ahead of this era, and they will gallop on the battlefield and be proud of the desert. Who else can stop the Han family from conquering the world?!
Wu Meiniang wore a beard with arrow sleeves, and her black hair was tied with a plain white ribbon. She was neat and tidy, showing off her slender figure.
Standing next to Fang Jun, watching dozens of craftsmen build this magical workshop under Fang Jun's command, I couldn't help but admire it, and even more admired it! Ability is the real charm of a man!
Lang Jun's brain is so long, why can he always come up with so many incredible and miraculous things?
He always smiles and seems careless about everything, but when he calms down, his unparalleled potential will immediately burst out! It seems that there is nothing in this world that he cannot do...
Fang Jun pointed to the busy craftsmen and the standing iron furnace, and said proudly: "From now on, those soaps, glass and other objects have become appendages. This is the most valuable thing of our Fang family, which is enough to establish a foothold on the world."
The Tang Dynasty is the foundation of immortality! So," Fang Jun turned his head and said with a smile: "From now on, take control of everything here. If I can't give you the title of the principal wife, then use this iron factory to pay tribute to the emperor.
You prove your value in my heart!"
Wu Meiniang seemed to feel that her throat was tightly grasped by a hand, and her heart seemed to have been severely hammered. She said in a hesitant voice, "Mr. Lang wants to... hand over this iron factory to the slave family?"
No one knows better than her how long Fang Jun has been planning for this ironworks and how much he attaches great importance to it! Even at the risk of being convicted and punished by His Majesty, this ironworks must be built before the Western Expedition!
Rather than handing over this iron factory to her, it would be better to say that Fang Jun handed over all his fundamentals to her...