Gao Wu returns and becomes a neighbor in the courtyard Chapter 315 The machine tool was dismantled into parts, and everyone in the technical department was completely convinced
Chapter 315 The machine tool was dismantled into parts, and everyone in the technical department was completely convinced
In the largest fitter workshop of the steel rolling mill, next to a malfunctioning machine tool, Section Chief Zhao of the Technical Department was explaining the malfunction of the machine tool to Duan Hongxuan. Next to him, Director Yang, Director of the Workshop Director Feng and others were silent.
Watch.
After Section Chief Zhao finished speaking, he looked at Duan Hongxuan.
At this time, the worker who went to get work clothes and gloves brought the things. Director Yang motioned to him to give the things to Duan Hongxuan.
Duan Hongxuan took over the work clothes and said politely: "Thank you!" Then he put on his clothes and gloves, looked at Factory Director Yang and asked: "Should I start dismantling it?"
Factory Director Yang took a deep breath, then spit it out heavily, and nodded fiercely: "Demolish it!"
Director Feng and Section Chief Zhao became anxious when they saw it. Section Chief Zhao hurriedly shouted: "Director Yang!"
Director Yang glared at him fiercely: "Shut up! Stand on the side and watch carefully!"
Duan Hongxuan ignored others and said to Yi Zhonghai with a smile: "Master, please bring someone to help me!"
Yi Zhonghai took a deep breath, "Okay!" After saying that, he pointed to one of his apprentices next to him, and the two of them stood next to Duan Hongxuan.
Duan Hongxuan spoke to Section Chief Zhao again: "Chief Zhao, please help me find a set of drawing tools and measuring tools, and find a small table that can hold drawing paper!"
Section Chief Zhao looked at Factory Director Yang, gritted his teeth, nodded, and arranged for someone to do it!
Soon, everything was brought.
Duan Hongxuan spread out the drawing paper, started measuring the machine tool with tools, and then started drawing.
In fact, the system has scanned the entire machine tool from the inside to the outside. Duan Hongxuan also already knows where the fault of the machine tool lies. He already knows the dimensions of all parts of the entire machine from the inside to the outside. But
In front of everyone, Duan Hongxuan still has to show off.
Duan Hongxuan moves very quickly, and even the drawing is ridiculously fast. If you don't know, you might think that he is just tracing blindly on the paper. It doesn't look like he is drawing precise drawings!
Soon, a drawing was completed, and Duan Hongxuan took the tools and began to dismantle the machine tool, while instructing Yi Zhonghai and his apprentices to help.
Every time a component is disassembled, Duan Hongxuan quickly measures and draws it.
Section Chief Zhao and a group of people from the technical department were dumbfounded when they saw Duan Hongxuan quickly measuring and drawing. How could anyone measure parts so fast? The speed was at least ten times faster than theirs. Isn't this a joke?
?
Can the measurement be accurate so quickly?
Drawing is also faster. This is not drawing at all. It is clearly just a few random daubs with a tool. How is that possible!
They have never seen drawings like this. Can this make the drawings standard?
At his speed, it only took him a few minutes to complete the drawings that took someone else an hour to draw. Isn’t this nonsense! What kind of person did Director Yang find?
Director Feng, Section Chief Zhao, and several people from the technical department took the drawings drawn by Duan Hongxuan, looked at them carefully, and then measured the dismantled parts themselves. They were so surprised that they could not close their mouths! p>
How is this possible? The measurement data is exactly the same and the drawings are also very standard!
Now, when these people look at me and I look at you, they all look in disbelief.
Looking at Duan Hongxuan again, it was as if he had seen a ghost! This group of people were completely convinced.
At this time, Duan Hongxuan had already begun to dismantle important parts. Then Duan Hongxuan called to Section Chief Zhao and explained to him how to dismantle it and what to pay attention to when dismantling it here.
Section Chief Zhao quickly took out his notebook, listening, reading, and recording carefully.
Not only Section Chief Zhao, but also Director Feng and several other people from the technical department took out their notebooks and listened, watched and recorded carefully.
As time goes by, Section Chief Zhao and others have gone from initial suspicion and distrust to surprise to admiration.
More than an hour passed, and as each drawing was completed, the machine tool was slowly dismantled into a pile of various large and small parts.
At this time, Professor Wu also picked up a few drawings and looked at them carefully. The more he looked at them, the more surprised he became, and the more he looked at them, the more delighted he became!
Director Yang stared nervously at Professor Wu's expression. When he saw Professor Wu frowning at first, then surprised, and finally happy, Director Yang couldn't help but breathed a sigh of relief, and then asked Professor Wu in a slightly nervous tone: "Old Wu
,How is it? Did you see anything?"
Professor Wu put down the drawings, looked at Duan Hongxuan who was still dismantling the machine with a complicated expression, exhaled heavily, and then answered Director Yang: "I can't tell anything else yet.
But as for his hand-drawing ability, which is so fast and accurate, I have not only never seen it, but I have never even heard of it!
To finish drawing all the parts of this equipment, it usually takes several technicians several days to draw it!
When we draw mechanical drawings, we are usually careful, for fear of making mistakes!
Hongxuan's drawing speed is nothing like drawing, it's faster than sketching!"
As he spoke, Duan Hongxuan had already dismantled the entire machine tool. Finally, he handed Yi Zhonghai two badly worn parts, one of which was even broken, and gave him two newly drawn parts.
Drawing: "Master, this is the drawing. According to the markings above, two of these parts will be processed! Sorry to trouble you!"
Yi Zhonghai took the parts and drawings with a complicated expression, glanced at Duan Hongxuan, nodded, and took his apprentice to find the machine tool to process the parts!
It was already past 12 noon, and the bell for getting off work had already rang, but no one paid attention to it at the time.
Now that the disassembly was finally completed, Director Yang called to Professor Wu and Duan Hongxuan: "Old Wu, Hongxuan, it's time to eat. Let's eat first, take a short break after eating, and do the rest of the work in the afternoon!
Thank you for your hard work, Hongxuan, I have to trouble you this afternoon!
You have to eat and drink enough at noon!"
Duan Hongxuan nodded, "Uncle Yang, this pile of things must be packed away. The most important thing is that these drawings cannot be missing!"
Just when Director Yang was about to speak, Section Chief Zhao immediately volunteered: "Classmate Duan Hongxuan, Director Yang, you go to eat, I will be here to watch at noon.
One missing part, one missing piece of paper, you all blame me!"
Factory Director Yang hesitated and asked: "Old Zhao, what do you do with your meal?"
Director Feng immediately said: "Director, I'm staying too. I'll find someone to go to the cafeteria to help us get back after dinner!"
Director Yang nodded, "Lao Feng, Lao Zhao, it's all thanks to you two!
Professor Wu, Hongxuan, let’s go and eat first!”
Duan Hongxuan took off his gloves and clothes, and was about to leave with Factory Director Yang and the others when he suddenly remembered something and turned around and said to Section Chief Zhao: "Section Chief Zhao, please inform Master Yi Zhonghai and let him go to eat first.
, finish the meal before processing the parts!"
"Okay, don't worry, I will notify you!"
Factory Director Yang took Professor Wu and Duan Hongxuan out of the workshop and walked to the canteen.
Along the way, the more Director Yang looked at Duan Hongxuan, the happier he became.
After all, after being the director of a steel rolling mill for so many years, although Director Yang is not very proficient in machinery, he still knows a little bit.
Duan Hongxuan can dismantle a machine tool into its parts, but the people in the technical department of his factory don't have this ability, and they simply can't dismantle other people's machine tools.
Of course, being able to dismantle does not mean that it can be reassembled. Assembly is even more difficult than disassembly. But Duan Hongxuan can dismantle the machine tool effortlessly, which at least proves that he is better than the people in the technical department of his factory. This makes Yang
The director's heart was relieved by a small amount!
Coupled with Duan Hongxuan's relaxed expression when facing a pile of parts, maybe he is confident about the afternoon assembly! This makes Director Yang even more excited.
He decided not to do anything in the afternoon and just stayed with Duan Hongxuan. He wanted to watch Duan Hongxuan reassemble the dismantled machine tool.
Factory Director Yang and his party came to the small private room in the canteen of the steel rolling mill that is specially used to entertain guests.
In the private room, Director Lin from the factory office was already waiting with several leaders. When he saw Director Yang bringing people in, he quickly stood up to greet them. The leaders in the private room also stood up to greet Director Yang and Professor Wu. Of course,
, and smiled and nodded to Duan Hongxuan.
When we were seated, Director Yang insisted on Professor Wu and Duan Hongxuan being the seated guests. Professor Wu declined, and Duan Hongxuan was even less likely to do so.
In the end, Director Yang took the seat, and then Professor Wu and Duan Hongxuan had to sit on both sides of him.
It’s just Professor Wu. Everyone knows him. He is a professor in the Department of Mechanical Engineering at Shuimu University. His level, reputation, and academic status are all there. Even if he is sitting in the upper seat and Director Yang is with him, there will be no problem.
But one of Professor Wu’s students looks like he’s still a teenager, so how can he be qualified to sit next to Director Yang?
Although the other leaders in the private room were confused, since Director Yang had arranged it this way, they couldn't say anything.
But don’t tell anyone, Director Yang asked you to sit down, how dare you, a young man, to sit down?
Of these people in the private room, no matter in terms of age or status, which one can you compare to? You didn't sit at the door obediently and were at the bottom of the table, but you sat down so unceremoniously on Factory Director Yang
Around you?
The leaders in the private room immediately had a bad impression of Duan Hongxuan. He was clearly a stupid young man who didn't understand the rules!
Duan Hongxuan felt everyone's emotions towards him, but he was too lazy to pay attention to it. He just sat there and drank tea quietly.
Well! I’ve been busy all morning, and I’m really thirsty!
Director Lin was worthy of being the director of the factory office. He ran out to ask the kitchen to arrange the dishes, and then came back to introduce everyone to each other. He did not neglect Duan Hongxuan, but it was mostly because he was a student brought by Professor Wu. But Director Lin also kept a cautious eye, because he saw that Director Yang arranged for Duan Hongxuan to sit next to him, which was not common, and it seemed that Director Yang had a very unusual attitude towards Duan Hongxuan.
Although I don’t know why Director Yang treats Duan Hongxuan a little differently, he still asked Director Lin to be more careful and polite when treating Duan Hongxuan!
Before the food was served, everyone in the private room was chatting and looking after Professor Wu. No one paid attention to Duan Hongxuan. Even Director Yang and Professor Wu seemed to deliberately downplay Duan Hongxuan's existence.
