Chapter 890 Duan Hongxuan will soon be noticed by everyone
Factory Director Yang took a new special steel information obtained from Duan Hongxuan. As soon as he returned to the steel rolling mill, he couldn't wait to summon the people in the technical department and gave them the information so that they could study it quickly and seize the time to smelt the finished product.
The workers in each workshop are still idle at the moment. We need to find some work for them quickly. What’s the point of being idle all day without working and only receiving wages? And if these workers are idle, there is no telling what day.
They can cause some trouble, so they have to get busy quickly!
With this information on special steel, Director Yang finally breathed a sigh of relief. This kind of special steel can be used as steel for drill bits and knives. Director Yang did not believe it. This time, the special steel can be collected by military factories.
Go!
If anyone dares to intervene this time and take away the special steel from their rolling mill, Yang really dares to go to the ministry and cause a scene.
Everyone cares about all the good things in their steel rolling mill. How can anyone do such a good job? Should they let their steel rolling mill survive? If this is the case, he will not be able to be the director of the factory. Whoever has the ability will be the one!
The information on advanced machine tools was asked by the Ministry to be handed over to other factories for production. Director Yang could barely figure it out. The first batch of special steel had special properties, so he just took it if it was taken by the military factory. He had nothing to say, but this one
Special steel can no longer be taken by others.
The Ministry took away the machine tool information of their factory. Although Director Yang was a little emotional, he could still understand it. After all, the country wanted to develop industry, and the gap in machine tools, especially advanced machine tools with good performance, was too big. Their steel rolling plant had failed before.
If it is not a factory that specializes in producing machine tools, neither the technical reserves nor the reserves of skilled workers are sufficient, and the machine tool output will not be able to increase for a while.
With the current output of machine tools in their steel rolling mill, it will take who knows how many years to meet the needs of the whole country. This will affect the development of the country's industry. After all, Director Yang is a national cadre, so he still has this awareness!
The Ministry took the machine tool data to a large factory in the Northeast that specializes in the production of machine tools. This factory is a large factory specializing in the production of machine tools. It has a strong reserve of skilled workers, a large production scale, and high output. It is simply not comparable to their steel rolling mill.
With their participation, the output of this advanced machine tool can quickly meet the country's demand for machine tools. It is precisely because of this that Director Yang is reluctant to hand over the data of this kind of machine tool currently produced in the factory.
Hand it in!
Later, he argued with the ministry for a long time, and finally got the ministry to agree that in the future, their factory would launch a new machine tool, and they would have to wait for half a year after the factory had produced it before handing over the information to the ministry. After all, he, the factory director, also had to do it.
The steel rolling mill is not considering it!
Last month, in August, a second state-of-the-art machine tool also went into production among the rolling mill's machines.
In July, the steel rolling mill recruited thousands of new workers. With the addition of these new workers, the steel rolling mill transferred a group of skilled workers from several other workshops to the machine tool workshop. The scale of the machine tool workshop expanded again. Therefore, now the entire
There are already more than a thousand workers in the workshop, which can finally meet the production needs of two types of machine tools.
The second type of machine tool in the steel rolling mill has just been put into production. The Ministry of Industry has become interested in this machine tool with the same advanced performance. Director Yang no longer wants to work, so he and the leaders of the ministry complained, and then everyone started to complain to each other.
After a compromise, the decision was made to let the steel rolling mill start production for half a year.
The leaders of the Ministry of Industry also considered that no matter where the technical data of the new machine tools of other people's steel rolling mills came from, after all, they belong to other people's steel rolling mills. To the outside world, they were developed by their own steel rolling mills. Other factories specializing in the production of machine tools,
The state has equipped them with a very good technical team, and gives them a lot of research funds every year, but they can't produce any research results. Compare it to the steel rolling mills, and some uninformed leaders of the Ministry of Industry have nothing to do with these professional machine tool manufacturers and research.
So I really hate that iron cannot become steel!
The steel rolling mill can produce various machine tools with advanced performance. Don't worry about whether it was a factory specializing in the production of machine tools before, but now it has this ability. Aren't your factories and research institutes that specialize in the production and research of machine tools blush?
To this end, the Ministry specially summoned these leaders to Beijing and held a meeting. At the meeting, the Ministry of Industry gave these leaders a good scolding: the state allocated professional technical personnel preferentially, and the state also allocated large sums of special funds, and the policy
They have taken care of it, but in the end, the results are not as good as those of a steel rolling mill that is not specialized in machine tools. Don’t you leaders blush? You just have the nerve to enjoy the benefits the country gives you with peace of mind. In the end, you still have to be ready-made.
Woolen cloth?
Minister Lu lectured them unceremoniously, making all the leaders blush, and they were all looking for cracks in the ground with their heads down! How shameful!
This trip to Beijing made these leaders so embarrassed that they did not dare to stay in the capital for long. As soon as the meeting was over, one or two of them rushed to the train station. Those who had a car that day took the bus and left directly, while those who did not have a car that day.
I also found a guest house to stay near the train station. I took the nearest bus the next day and hurried home. It was so embarrassing that I had no place to show my face. I originally thought of taking advantage of the opportunity to go to Beijing.
Let’s take a nice trip to the capital, visit the department stores in the capital, and pick up some things for my family. But now, how can I have the thought or the nerve to visit the capital? Go home quickly and work hard when you go back!
This trip to Beijing made all the leaders of the factories and research institutes specializing in the production and research of machine tools under the Ministry of Heavy Industry feel swollen in the face. The only one who gained something was the Northeast Machine Tool Factory, who took the Ministry's
information about the new machine tool, and quickly went back to arrange production.
But this information is very hot to hold. It is the machine tool information of a steel rolling mill. That is to say, the steel rolling mill has no experience in producing machine tools before and has limited production capacity. This is why the Northeast factory got the advantage, but it is really embarrassing.
This chapter is not over, please click on the next page to continue reading! Originally, the leaders of the Northeast Machine Tool Factory should be happy to get this information, but now they are even happy when they receive the information from Minister Lu
, in the eyes of Minister Lu who hates the fact that iron cannot become steel, he ran away in despair. We can’t compare with your rolling mill in researching advanced machine tools, so we have to fight for our strength in production machine tools!
A steel rolling mill that does not originally produce machine tools can actually develop such advanced machine tools on its own. This is not a technology provided by the ministry. Even the ministry obtained technical information from other steel rolling mills. This makes the major machine tools
The factory and the machine tool research institute were very curious. These advanced machine tools were actually developed by a group of people engaged in steelmaking. It was completely inconsistent with common sense!
So, everyone began to inquire about the origin of these advanced machine tools in the steel rolling mill through various channels. This matter was not kept secret. Naturally, Duan Hongxuan would soon be noticed by everyone. Once everyone knew that this kind of advanced machine tools were from Shuimu University
It was researched by a student alone, and it will be exciting to watch!
The Mechanical Research Institute in Beijing knows the situation of the steel rolling mill best. During the National Day celebration last year, the family of Zhuan who went to the steel rolling mill to verify the new machine tools had people from the Mechanical Research Institute. From that time on, they had already paid attention to Duan Hongxuan.
!
Later, a new steel-making furnace was launched in the steel rolling mill, and Shougang paid attention to Duan Hongxuan again. The Shougang Research Institute usually did a lot of business cooperation and technical exchanges, so the Machinery Research Institute also knew the news, which put them at risk.
I was shocked. I didn’t expect that a school student who could develop advanced machine tools on his own would also know steelmaking technology in the future. This span is quite big!
Because of this, Duan Hongxuan became the focus of the Mechanical Research Institute. This attention shocked the leaders of the Mechanical Research Institute because they discovered that Duan Hongxuan had given another special steel to the rolling mill.
, the leaders of the Mechanical Research Institute were completely confused. They couldn’t figure out what Duan Hongxuan did. First it was machine tools, then steel-making furnaces, and now it’s metal materials. Isn’t this span too big? Or should I say this?
Is this guy really such a genius? Can he excel in so many different fields at the same time?
If this is the case, what kind of career will this student named Duan Hongxuan do after graduation? Do they have the ability to recruit such a person into their research institute that studies machine tools in the future?
Fortunately, Duan Hongxuan is currently participating in a large project of the Ministry of Industry, and this project happens to be located in their Machinery Research Institute. The most important thing is that although there are experts from all over the country in this project, proportionally speaking, among them
The Mechanical Research Institute and the Department of Mechanical Engineering of Shuimu University have the highest proportion of expert professors in the project team, and there is also Duan Hongxuan’s teacher. Therefore, the leaders of the Mechanical Research Institute told the engineers in the project team to let
They must take this opportunity to establish a good relationship with the Department of Mechanical Engineering of Shuimu University, especially Professor Wu.
Originally, everyone felt that the research on industrial motherboards was a bit unreliable, but since the Ministry of Industry has announced that it will take the lead in organizing this project, then everyone will work on it first. As for whether the results will be produced in the end, to be honest, no one is optimistic about it.
Because of this, although the industrial machine project is placed in the Mechanical Research Institute, the leaders of the Science and Technology Research Institute themselves do not pay much attention to this project.
As another new machine tool with the same advanced performance was put into production in the steel rolling mill in August, the entire industrial system was fried. The steel rolling mill was asking God, is their technology really so strong?
The Mechanical Research Institute, also located in Beijing, was shocked and angry after hearing the news. What was surprising was that the steel rolling mill already had an advanced machine tool, and now a second type of machine tool has come out.
What makes me angry is that when it comes to machine tool research and design, their research institute should be better than steel rolling mills, but the current situation makes it really difficult for their research institute to hold its head high. Everyone is in the capital, so close, so far apart.
In comparison, doesn't it seem that their Mechanical Research Institute is too incompetent!
According to the news that was subsequently learned, this is the second new type of machine tool also created by Duan Hongxuan, and there are more. It is said that Duan Hongxuan gave the rolling mill more than one set of advanced machine tool information, and there are several more.
, the large-scale recruitment of workers in the steel rolling mill is also to expand the scale of the machine tool workshop.
Now the leaders of the Mechanical Research Institute can't sit still. What are the industrial base machine project teams in their institute doing now? Isn't the industrial base machine just a machine tool? It's just one with more advanced performance, larger volume and higher precision.
Just a large machine tool.
Duan Hongxuan can single-handedly continuously develop various machine tools with advanced performance and deliver them to the steel rolling mill. As the technical director of the industrial mother machine project team, and with the cooperation of hundreds of experts in the entire project team, maybe this industry
The mother machine can really be made!
Coming to this conclusion made the leaders of the Mechanical Research Institute regret it. If they had known this was the case, their research institute should have paid more attention to this project and sent two more people to join the project. Now it is too late.
Because although this project team is placed in their Mechanical Research Institute, since the project team officially started operations, the entire project team has been completely closed to the outside world. Even the leaders of their Mechanical Research Institute have no way to meet the people of the project team. The entire project team
A large area of the location is guarded by soldiers. Without approval from the project team or the Ministry of Industry, even the leaders of their Machinery Research Institute cannot contact anyone from the project team!
The leaders of the Mechanical Research Institute are now a little envious of Shuimu University. How could they produce such a monster student?
Now that it can't get access to the project, the Mechanical Research Institute has no choice but to take a step back and try to contact the so-called leaders of the Mechanical Department of Shuimu University and quickly establish a good relationship with them. Who made Duan Hongxuan a student of the Mechanical Department now? With such a monster student,
Their Machinery Research Institute and the Mechanical Department have established a relationship in advance. If your Mechanical Department has any projects organized by Duan Hongxuan in the future, you can cooperate. After all, we are a Mechanical Research Institute. In the field of mechanical research, we have both technology and talents.
Not bad!
This chapter is not finished yet, please click on the next page to continue reading the exciting content! The outside world is in a state of panic. Leaders of various research institutes and manufacturers in the field of machine tool machinery are showing off their talents and going around to get information. Duan Hongxuan is now
Knowing nothing about this, he still lived his little life leisurely every day, teasing Huahua and Xiaodang, and kissing me with three beautiful beauties. He was so happy!
Duan Hongxuan was at ease at home, but Yi Zhonghai was so busy that he hit the back of his head. The machine tool production workshop was further expanded, and the second type of machine tool also officially entered production. As the deputy director of the workshop in charge of production and technology, Yi Zhonghai was extremely busy.
.
But it happened that the eldest mother was about to give birth at this time, which made Yi Zhonghai almost crazy.
Giving birth to a biological child of his own would allow the Yi family to have children, and at the same time prevent the couple from becoming extinct. This was what Yi Zhonghai had been thinking about for many years.
Now it's time to see that my wife is about to give birth, but at this juncture, their machine tool shop is extremely busy.
Yi Zhonghai is the deputy director of the workshop. Duan Hongxuan finally helped him get this deputy director of the workshop. Naturally, he will not take it lightly. In addition, he will soon have a son when he is old. For the sake of his future children, he has to roll steel.
The factory worker has something to show for himself. After all, whether his child will be a worker's child or a cadre's child in the future will all depend on him as the father. Yi Zhonghai really can't handle it!
Yi Zhonghai is helpless, his children are more important, but his children's future cannot be ignored in the future. Whether he can give his children a better life depends on him as a father, so he can't relax in the steel rolling mill either. Yi Zhonghai
After much deliberation, he finally decided to come to Duan Hongxuan. With Duan Hongxuan, a little miracle doctor here, he could feel more at ease!
"Hongxuan, the workshop has been so busy recently that I can't even take care of you as a eldest mother, but the child in her belly is really important to our family. Recently, she has been asking you to give her more snacks. I'm begging you.
